1.所需容量約50L

2.適用于實驗室固化工藝

3.溫度范圍高達220°C（帶溫度監控器）

4.需要溫度控制

5.電源220V50 / 60Hz

6.真空范圍：10-2至10-3托（我們需要控制真空度）

7.干燥無油的真空系統

一、適用范圍：Application

Environmental Test Chamber Vacuum Drying Oven for Medicine , Electronic

工業干燥箱適用于電子，石油，礦山，醫藥，機械制造等。鼓風干燥及熱處理產品。

二、結構Structure:

1、工業干燥爐采用單片式，保溫隔熱層采用優質礦棉，外殼，熱風循環裝置，電控柜右側釹鐵硼.. 干燥箱操作方便，干燥柜配有新的進出口空氣，柜內通風管道和熱風循環風機，烘干套管；

Industrial drying oven adopts monolithic, thermal insulation layer is made of high quality mineral wool, shell, hot air circulation device, electric control cabinet on the right side of the ndustrial drying oven is convenient for operation, drying cabinet equipped with new air in and out of port, the cabinet ventilation duct and hot air circulation fan, drying the casing.

2、外殼材料：主體骨架采用40×40mm角鋼焊接在一起，圍護墻材料采用0.8m m厚不銹鋼板；風層采用厚1(SPCC)冷軋鋼板制作 外墻材料為1mm冷軋高碳鋼，車身表面涂淺灰色涂料；

Case material: body skeleton adopts 40 x 40 mm Angle steel welded together, enclosure wall material is 0.8 mm thick stainless steel plate; Wind layer is made of thick 1 (SPCC) cold rolling steel plate, the outer wall material is 1 mm cold rolled high carbon steel, body surface coating light gray paint.

3、保溫材料：優質礦棉，保溫層厚度設計要求確保烘箱在額定工作溫度范圍內，套管外壁.. 室溫溫度25°C或以下；>100毫米絕緣層厚度在烤箱底部約80毫米；

Thermal insulation material: high quality mineral wool, the thickness of the insulation layer design requirements to ensure that the oven in the rated operating temperature range, casing outer wall temperature at room temperature + 25 °C or less; > 100 mm insulation layer thickness of insulating layer at the bottom of the oven about 80 mm.

4、門密封條：耐高溫石棉繩密封；

Door sealing strip:High temperature resistant asbestos rope seal

5、門為：設計開門與門為手動平開，門為鋼結構鋼與精度高的合格鋼板組裝焊接而成；

The door is:Design to open the door and the door is manual flat open, the door is steel structure steel and precision of high qualified steel plate assembly welding and into.

6、門是密封的：使用棒柄和門的手冊是軟邊密封裝置，壓力可以使門和外殼，確保在過程中保持關閉框的狀態。 在生產中，消除熱氣體逸出，改善工作環境，保證箱體溫度均勻性，提高節能效果；

The door is sealed:USES the manual of the rod handle and the door is the soft edge sealing device, pressure can make the door and enclosure, make sure remain the state of closed box in the process of production, to eliminate the hot gases to escape, improved working environment, guarantee the box temperature uniformity and enhance energy saving effect.

7、由0.8毫米厚不銹鋼板表面鈍D13孔制成，用于控制氣流，提高爐溫度均勻性。

The wind but I:Wind but made of 0.8 mm thick stainless steel plate surface blunt D13 holes, is used to control the air flow, to improve the drying oven temperature uniformity.