• 10 A ( 10 mm)
• Extended range to 120 % of nominal rating
• 225 mV mV @ IPR
• Class 1 accuracy (-10 °C to 55°C)
• 600 V reinforced PD2 OV III, IEC 61010-1
• 50/60 Hz operation
• 1 m output cable (standard)
• Bosch XDK110 compatible (not supplied)  

Features

● Split-core current transformer
● Rated primary current: 10 A
● Application up to 600 V CAT III PD2, basic insulation
● Accuracy class 1 (IEC 61869-2)
● Voltage output, 225 mV at IPr
● ? 10 mm sensing aperture
● 1 m output cable
● Ambient temperature -10 °C … +55 °C
● Very low cost solution
● Slot for attaching the C.T. on the primary with plastic tie
● DIN rail adapter (optional).
Special feature
● BOSCH XDK 110 compatible.
Advantages
● No interruption of electricity during installation on insulated
conductors
● Quick, non-intrusive and easy setup
● Provide a calibrate output. 

Applications
● Hybrid inverter (Home Energy Storage)
● Power metering: current measurement for active power
calculation
● Building sub-metering: energy effciency monitoring,
consumption analysis and cost allocation
● Power quality monitoring: electrical loads and distribution
system equipment
● Distributed measurement systems
● Condition monitoring (e.g. Motor loads such as conveyers,
pumps).

Standards
● IEC 61010-1: 2010
● IEC 61010-031 ed1.1: 2012
● IEC 61869-1 ed1.0: 2007
● IEC 61869-2: ed1.0: 2012
● IEC 61869-6: draft 2016
● IEC 61869-10: draft 2016
● UL 508: 2013.