?Automatic MDI/MDI-X crossover for plug-and-play |
Models | NS-200AFT-T | ||||
Technology | |||||
Standards | IEEE 802.3, 802.3u, 802.3x | ||||
Processing Type | Store & forward, wire speed switching | ||||
MAC Addresses | 1024 | ||||
Memory Bandwidth | 1.4 Gbps | ||||
Frame Buffer Memory | 256 Kbit | ||||
Flow Control | IEEE 802.3x flow control, back pressure flow control | ||||
Interface | |||||
RJ-45 Ports | 10/100 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection | ||||
Fiber Port | 100 Base-FX | ||||
LED Indicators | 10/100M, Link/Act, Full duplex/Half duplex (Fiber Port) | ||||
Ethernet Isolation | 1500 Vrms 1 minute | ||||
Multi Mode | Multi mode fiber cables | 50/125, 62.5/125 or 100/140 μm | |||
Distance | 2 km, (62.5/125 μm recommended) for full duplex | ||||
Wavelength | 1300 or 1310nm | ||||
Min. TX Output | - 20 dBm | ||||
Max. TX Output | -14 dBm | ||||
Max. RX Sensitiv | -32 dBm | ||||
Max. RX Overload | -8 dBm | ||||
Budget | 12 dBm | ||||
Ethernet Transmission Distance | Ethernet | 2-pair UTP/STP Cat.3, 4, 5, EIA/TIA-568 100 Ω | |||
Fast Ethernet | 2-pair UTP/STP Cat. 5, EIA/TIA-568 100 Ω | ||||
Power | |||||
Input Voltage Range | +12 VDC ~ +48 VDC (Non-isolation) | ||||
Power Consumption | 0.12 A @ 24 VDC | ||||
LED Indicator | Yes | ||||
Protection | Power reverse polarity protection | ||||
Frame Ground for EMS Protection | Yes | ||||
Mechanical | |||||
Casing | Plastic (Flammability UL 94V-0) | ||||
Dimensions (W x L x H) | 33 mm x 85 mm x 107 mm | ||||
Installation | DIN-Rail | ||||
Environment | |||||
Operating Temperature | -30 °C ~ +75 °C | ||||
Storage Temperature | -30 °C ~ +85 °C | ||||
Ambient Relative Humidity | 10% ~ 90% RH, non-condensing |
NS-200AFT-T CR | Industrial 10/100 Base-T to 100 Base-FX Media Converter; 1 multi mode, ST connector (RoHS) |
GPSU06U-6 | 24V/0.25A, 6 W Power Supply |
DIN-KA52F | 24V/1.04A, 25 W Power Supply with DIN-Rail Mountin |