Softek Barcode Reader Toolkit for Apple OSX -

Softek Barcode Reader Toolkit for Apple OSX by Softek Software

Reads barcodes from image files. The Softek Barcode Toolkit for Apple OSX reads barcodes from TIF and JPG files. Imaging applications can use the toolkit to read barcodes strings from scanned documents and cross reference them against database tables. The toolkit supports both Shell and 'C' programming interfaces and supports all the common barcode formats.

The Softek Barcode Toolkit enables application programmers to read barcodes from image files. The image files can be from any source, but will typically come from a scanner or computer modem. The barcode recognition engine is contained in a single library file, which makes product upgrades a simple matter. The application programmer can use either the Shell or the 'C' interface. The choice of interface will depend on the type of language being used and the type of application to be developed.

A few lines of code are all that is needed to read a barcode from an image. As can be seen from this example using the 'C' interface:

hBarcode = STCreateBarCodeSession() ;

bar_count = STReadBarCode(hBarcode, file, 0, &bar_codes, &bar_codes_type) ;

for (i = 0; i < bar_count; i++)

{

printf ('Barcode = %s/n', bar_codes[i]) ;

}

Using the Shell interface is even simpler:

$ ./bardecode -t any -j 1 -f file.tif

1234567890

Image Formats:

TIF

JPG

The following types of barcode are currently supported:

CODE-39

CODE-128

CODE-2-of-5 Interleaved

Codabar

EAN-8

EAN-13

Patch Codes

UPC-A

UPC-E

Barcode Widths:

The main requirement is for each black or white bar in a barcode to be clearly visible on the image. All barcodes have at least 2 sizes of bar and the image needs to be of high enough quality to show this. For example, a Code 39 barcode consists of 9 bars per character, of which 3 must be wide and 6 must be narrow. The wide bars should be around 2.5 times the size of the narrow bars - but for simplicity we will say 2 times the size. This means that each character needs at least 12 pixels in an image. This assumes that each pixel in the image lies either entirely in a black bar or entirely in a white bar. In practise, this isn't possible and so the resolution should allow around 36 pixels per character.

So, to encode a string of 10 characters (including the start and stop *) you will need at around 360 pixels. If the barcode is 1 inch wide on the paper then you will need to scan at a resolution of around 400 DPI. If the barcode is 2 inches wide then you will need to scan at a resolution of at least 200 DPI.

Some types of barcode have more than 2 widths of bar and a higher resolution still will be needed to ensure that the different widths can be distinguished on the image.

As for barcode height - if you have a very wide barcode then you need to ensure that it is high enough to cope with any skewing that takes place when the image is scanned.

In summary - the success of a project can depend on specifying the correct barcode size and image resolution.

Code 39 Number of Characters 10, Minimum Number of Pixels (approx) 340

Code 2 of 5 (interleaved) Number of Characters 10, Minimum Number of Pixels (approx) 190

Code 128 (code set A) Number of Characters 10, Minimum Number of Pixels (approx) 280

Code 128 (code set B) Number of Characters 10, Minimum Number of Pixels (approx) 280

Code 128 (code set C) Number of Characters 10, Minimum Number of Pixels (approx) 170

EAN-13 Number of Characters 13, Minimum Number of Pixels (approx) 190

EAN-8 Number of Characters 8, Minimum Number of Pixels (approx) 140

UPC-A Number of Characters 12, Minimum Number of Pixels (approx) 190

UPC-E Number of Characters 8, Minimum Number of Pixels (approx) 120

Reads barcodes from image files.

PartNumbers: PC-515730-69269 515730-69269 PC-515730-69270 515730-69270 PC-515730-69271 515730-69271 PC-515730-69272 515730-69272 PC-515730-69273 515730-69273 PC-515730-69274 515730-69274 PC-515730-69276 515730-69276 PC-515730-69275 515730-69275

Publisher PartNumbers: 008/1 008/2 008/3 008/4 008/5 008/6

PurchaseOptions: Softek Barcode Reader Toolkit for Apple OSX V7.1.1 1 User/Developer License (Not Run-time Royalty Free), Softek Barcode Reader Toolkit for Apple OSX V7.1.1 4 User/Developer License (Not Run-time Royalty Free), Softek Barcode Reader Toolkit for Apple OSX V7.1.1 8 User/Developer License (Not Run-time Royalty Free), Softek Barcode Reader Toolkit for Apple OSX V7.1.1 1 Server License (Not Run-time Royalty Free), Softek Barcode Reader Toolkit for Apple OSX V7.1.1 1 Site Wide License (Allows Unlimited Users/Developers at a Single Physical Address) (Not Run-time Royalty Free), Softek Barcode Reader Toolkit for Apple OSX V7.1.1 1 Distribution License (Allows unlimited Users at any Number of Physical Addresses), Softek Barcode Reader Toolkit for Apple OSX V7.1.1 1 year Support and Upgrades License, Softek Barcode Reader Toolkit for Apple OSX V7.1.1 Source Code Escrow Annual Subscription - (An Escrow Agreement will be sent to you for signature - please read Licensing section below)

Resources: Download the Softek Barcode Reader Toolkit for Apple OSX V7.1.1 evaluation on to your computer - Displays Nag Screens

Operating System for Deployment: Mac OS X

Architecture of Product: 32Bit

Product Type: Component

Component Type: Static Link Library

Product Class: Business Components

Keywords: softek Barcode Barcodes bar codes Author

Softek Software