性能特點

● 本機全電腦操控自動調單，操作容易，簡單，可儲存1000個釘單。
● 無底有蓋箱也可釘（需在訂貨時說明）。
● 3-5分鐘調整尺寸，簡單快捷。
● 釘頭部動力為伺服電機，機械速度：800釘/分鐘。
● 送紙部采用真空吸咐前緣皮帶送紙確保紙箱不歪斜，本機送紙前緣皮帶可單獨調整皮帶高
低，增加使用壽命。
● 進紙時有側拍打裝置可使送紙整齊順利。
● 送紙部送紙速度由PLC自動控制，保證不會出現紙箱釘不出來或釘壞的現象。
● 送紙電機采用伺服電機控制，確保釘距穩定又準確。
● 本機設計有紙箱整形功能，在釘箱時紙箱前后剪刀口不會超過正負2mm。
● 本機可釘雙釘、單釘、加強釘、雙頭尾釘和單頭尾釘。
● 本機采用電腦屏操作，并顯示故障說明。
● 本機可釘三層、五層紙箱（七層時需在訂貨時提前聲明）。
● 本機后有自動計數堆碼定量輸出。
● 本機打捆部分為選配 。
● 機器在正常運轉過程中出現歪斜時，會自動停機。
● the machine is controlled by the computer automatically adjust the order, easy to operate, simple, can store 1000 staples.
● bottomless and capped cases can also be stapled (to be specified on order).
● adjust the size in 3-5 minutes, easy and quick.
● the driving force of the nailing head is servomotor, mechanical speed: 800 nailing/min.
● the paper feeding department adopts vacuum suction leading edge belt to ensure that the carton is not askew. The paper feeding leading edge belt of this
machine can adjust the height of the belt independently to increase the service life.
● there is a side flapping device for feeding paper to make it neat and smooth.
● feeding speed by PLC automatic control, to ensure that the carton can not nail out or nail bad phenomenon.
● paper feeding motor is controlled by servo motor to ensure stable and accurate nail spacing.
● the machine is designed with the function of carton shaping, the front and rear scissors of the carton will not exceed plus or minus 2mm when nailing the
box.
● this machine can nail double, single, reinforcing, double head and single head tail nail.
● this machine adopts computer screen operation, and displays fault instructions.
● this machine can be nailed to three-layer and five-layer cartons (for seven-layer cartons, please declare in advance when ordering).
● the machine finally has automatic counting stacking quantitative output.
● the baling part of the machine is optional.
● the machine in the normal operation process of the occurrence of skew, will automatically stop