 | Name | LEVEL INDICATING | | Model | 2L-LI-D/P | | Input Voltage | AC 220V (100V
separate order) | | output | 4/20mA | | Input | input current (4~20mA) | | Function | Indicator for various kids of tanks | | Panel CUT | 92 × 45 | | SIZE | 98×50×102(H×W×D) | | Model | | 2L-LI-D/P (Resistance Input ) | |
| Input Voltage | | AC 220V (100V
separate order) | |
| Contact Point
Capacity | | 0~300Ω / 4~20mA (Separate Order)
Voltage Outpu0~1.5V(%) | |
| Feature | | Digital Indicator without separate uinit ( Built-in Panel Meter Amplifier) | |
| Function | | Indicator for various kids of tanks | |
| Panel CUT | | 92 × 45 | |
| SIZE | | 98×50×102 | |
| Material | | - HEAD - Nylon Fiber - FLOAT- P/P foaming - PIPE - SUS 304 | | |
| Model | | 2L-LI-D/P (Current Input) | |
| Input Voltage | | AC 220V (100V
separate order) | |
| output | | 4/20mA | |
| Input | | 4/20mA | |
| Function | | Indicator for various kids of tanks | |
| Panel CUT | | 92 × 45 | |
| SIZE | | 98×50×102 (H×W×D) | |
| Material |
| - HEAD - Nylon Fiber - FLOAT- P/P foaming - PIPE - SUS 304 | | | | | | | | | ▶ | 2L-LI-D/P is the Digital Level Indicating Controller built in a Micom Chip, it can check the indicating value as setting High/Low level alarm and Auto Feeding/Drainage for various kinds of tanks as Digital Mode. It is the Resistance Input (0~300Ω) Type of level controller built in the function isolating a contact output in case of the line disconnecting or the abnormal condition of sensor. | | ▶ | Composed easy to control and set-up, it is manufactured to operate strongly against the power noise or the induction of sensor line, etc. | | | | | | (Resistance Input ) | | Using power : AC 220V 60Hz 2W (Special order - 100V) | | Input Signal : 0~300Ω Resistance(Indicating Meter Sensor & Parallel mode) | | Error : ±0.5FS | | Operating condition : 0-50℃ 0-90%RH | | Outer dimension : 98x50x102(HxWxD) CUT/92x45 | | Usage : Level indicating Controller for various kinds of Water tank, Oil tank,
etc Sensor is required to use with less than 80℃
(Separate order with more than 80℃) | | | | | | | | | | ▶ | 2L-LIC-D/P is the Digital Level Indicating Controller built in a Micom Chip, it can check the indicating value as setting High/Low level Alarm and Auto Feeding/Drainage for various kinds of tanks as Digital Mode. It is the Current Input (4-20mA) Type of Level Controller built in the function isolating contact output in case of line disconnecting, short or the abnormal condition of sensor. | | ▶ | Composed easy to control and set-up, it is manufactured to operate strongly against the power noise or the induction of sensor line, etc | | | | | | (Current Input) | | Using power : AC 220V 60Hz 2W (Special order - 100V) | | Input Signal : 4~20mA (Indicating Meter & Sensor Series mode) | | Error : ±0.5FS | | Operating condition : 0-50℃ 0-90%RH | | Outer dimension : 98x50x102(HxWxD) CUT/92x45 | | Usage : Level indicating Controller for various kinds of Water tank, Oil tank,
etc Sensor is required to use with less than 80℃
(Separate order with more than 80℃) | | | | | |
| | ▣ | [1]Fill the existence of pressure such as non-pressure tank, pressure tank(less than 5 kg) according to the classes of tanks and separate entry is required if temperature is high (more than 80℃). (Special order in case of more than 5K) | | ▣ | There are two types; Flange and Screw type. In case of a Flange type, it should use with 3″(80Φ)4″(100Φ), In case of a Screw type, 2″(50Φ) socket should be welded to a tank. | | ▣ | Separate order is required for special chemicals and high temperature use.
(80℃ and more) | | |
Gear-type Sensor
|
Flexible Sensor
| | ◆ | As Gear-type sensor hasn't the height of ceiling, it is ordered and manufactured as a Gear-type when sensor isn't able to put in a tank. | | ◆ | Refer to the Gear-Type in the tail of 35~36 page | | ◆ | Temperature should be less than 80℃ only (Oil, Water, etc). | | ◆ | Special order is required for the chemicals tank such Hydrochloric acid, Sulphuric acid | | | | | | [Attention!] Never use to a Pressure tank | | | ◆ | As Flexible-type sensor hasn't the height of ceiling, it is ordered and manufactured as a Flexible-type when sensor isn't able to put in a tank. | | ◆ | In the lower part of sensor, the stain weight is an one-touch fitting. Simple to put a hose in (50mm/m socket-type). | | ◆ | When handling a sensor, Put a stain weight in first and continue to put with care while remaining a sensor as the original position. (Be careful not to be bent) | | ◆ | When delivering, deliver as a fixed position to the handling frame (PVC Pipe) and Do not give an impulse or throw. (It can be the reason of damage) | | ◆ | Temperature should be less than 80℃ only (Oil, Water, etc) | | | [Attention!] Never use to a Pressure tank. | | | |
會(huì)員1.png)
