PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
成都廣控儀表有限公司(上海辦事
參 考 價 | 面議 |
產品型號
品 牌
廠商性質經銷商
所 在 地成都市
聯系方式:王茹查看聯系方式
更新時間:2024-08-14 08:53:50瀏覽次數:59次
聯系我時,請告知來自 智能制造網暫無信息 |
OP系列標準孔板裝置適用于液體或氣體產品介紹The Series OP Orifice Plate Flowmeter is a complete orifice plate flow metering package.
OP系列標準孔板裝置
適用于液體或氣體
產品介紹
The Series OP Orifice Plate Flowmeter is a complete orifice plate flow metering package. It incorporates a stainless steel orifice plate with a unique holder or carrier ring containing metering taps and integral gaskets. It was designed for use wherever there is an application for a conventional flow orifice plate. It can also be used in place of other primary differential producers for efficiency and cost effectiveness. Installation is accomplished simply by slipping the unit between standard flanges (orifice flanges are not required). The Series OP is available in line sizes from 1/2" to 24" and can be used with compatible liquids and gases.
技術參數
介質: Clean air and compatible gases.
材質: 304 SS, Buna-N gaskets.
精度: ±0.6% full scale flow. (Beta= .2-.6) ±0.7% for Beta greater than .6.
溫度: 140°F (60°C) max.
壓力: 150 psi max.
壓損: 1 - Beta ratio2, eg: 1 - 072 = 1 - 0.49 = 51% of the d.p.
尺寸: 1/2" to 24".
連接: 1/4" female NPT.
安裝: Standard flange 125#/150# rating.
管路: General requirements 10 diameter upstream and 5 diameter downstream.
重量: Varies with line size. See Catalog page.
選型:
1/2" 到24",請咨詢我司
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
成都廣控儀表有限公司(上海辦事