單雙動氣缸 | Duble-Single acting cylinders | 氣缸內徑 Bore sizes of cylinder (mm) |  12 |  16 |  20 |  25 |  32 |  40 |  50 |  63 |  80 |  100 | 標準行程 Stroke (mm) | 10,15,20,25,30,35,40,45,50,55,60,75,85,100 | 雙動行程范圍 The range of stroke (mm) | MAX.30 | MAX.100 | 工作媒體 Power fluid | 已濾清之壓縮空氣(潤滑或未潤滑) Filtered air with or without lubrication | 使用壓力范圍 The range of pressure (MPa) | 0.2~0.7 | 0.15~0.7 | 0.1~0.7 | 使用溫度范圍 The range of temperature (℃) | -10 ~ +60 | 雙動型外形尺寸 | Double acting-standard type |  Dimensional Table_-------- -------右列行程之本體長度 "c" 尺寸相同 : (5,10)(15,20)(25,30)(35,40)(45,50)(55,60) ----------------------------------- ---The length "c" of cylider body is same of thestroke:(5,10)(15,20)(25,30)(35,40)(45,50)(55,60) | Bore | DJD...N | DJD...M | B1 | B2 | D | E | G | H | K1(內牙) | A | C | A | C |  20 | 30.5 | 19.5 | 40.5 | 29.5 | 5.5 | 19.5 | - | 18 | 1.5 | 14 | M4x0.7Px10L |  25 | 33 | 21 | 43 | 31 | 6 | 22 | - | 20 | 2 | 16 | M5x0.8Px10L |  32 | 38.6 | 24 | 48.6 | 34 | 7.3 | 24.3 | 50 | 21 | 3.3 | 17 | M6x1.0Px14L |  40 | 41.1 | 26.5 | 51.1 | 36.5 | 7.3 | 34.5 | 58 | 31 | 3.3 | 27 | M8x1.25Px14L |  50 | 46.6 | 28.6 | 56.6 | 38.6 | 9 | 36 | 71 | 32 | 4 | 27 | M10x1.5Px15L |  63 | 50.5 | 32.5 | 60.5 | 42.5 | 9 | 36 | 84.5 | 32 | 4 | 27 | M10x1.5Px15L |  80 | 63.3 | 41.3 | 73.3 | 51.3 | 11 | 44 | 104 | 39 | 5 | 33 | M14x1.5Px20L |  100 | 62.3 | 45.3 | 72.3 | 55.3 | 8.5 | 41.5 | 124 | 38.5 | 3 | 33 | M16x2.0Px20L | Bore | K2(外牙) | L | O | P1 | P2 | P4 | S | T1 | V | W |  20 | M6x1.0 | 13 | M5x0.8 | 11 | 5 | 3.8內孔,M5x0.8P內牙 6.5x5 | 34 | 24 | 8 | 6 |  25 | M8x1.25 | 17 | M5x0.8 | 14 | 6 | 4.8內孔,M6x1.0P內牙 8x6 | 40 | 28 | 10 | 8 |  32 | M10x1.25 | 22 | PT 1/8 | 14 | 6 | 4.8內孔,M6x1.0P內牙 8x6 | 44 | 34 | 12 | 10 |  40 | M14x1.5 | 28 | PT 1/8 | 18 | 8 | 6.8內孔,M8x1.25P內牙 9.5x8 | 52 | 40 | 16 | 14 |  50 | M18x1.5 | 38 | PT 1/4 | 18.5 | 8.5 | 6.8內孔,M8x1.25P內牙 11x8.5 | 62 | 48 | 20 | 17 |  63 | M18x1.5 | 40 | PT 1/4 | 18.5 | 8.5 | 6.8內孔,M8x1.25P內牙 11x8.5 | 75 | 60 | 20 | 17 |  80 | M22x1.5 | 45 | PT 3/8 | 22.5 | 10.5 | 9.8內孔,M12x1.75P內牙 14x10.5 | 94 | 74 | 25 | 22 |  100 | M22x1.5 | 45 | PT 3/8 | 28 | 13 | 12.5內孔,M14x2.0P內牙 | 114 | 90 | 25 | 22 | 近接開關安裝尺寸 | lnstallation of sensor switchs |  Dimensional Table_-------- ------- | Bore | 近接開關型式Sensor switch | A | B | C | D | E | 12 | LN01D | 34.5 | 22 | 9.5 | 15.5 | 22 | 16 | LN01D | 38.5 | 24 | 9.5 | 15.5 | 22 | 20 | LN01D | 43.5 | 26.5 | 9.5 | 15.5 | 22 | 25 | LN01D | 49.5 | 29.5 | 9.5 | 15.5 | 22 | 32 | LN01D | 53.5 | 31.5 | 9.5 | 15.5 | 22 | 40 | LN01D | 61.5 | 35.5 | 9.5 | 15.5 | 22 | 50 | LN01D | 71.5 | 40.5 | 9.5 | 15.5 | 22 | 63 | LN01D | 84.5 | 47 | 9.5 | 15.5 | 22 | 80 | LN01D | 103.5 | 56.5 | 9.5 | 15.5 | 22 | 100 | LN01D | 123.5 | 66.5 | 9.5 | 15.5 | 22 | 近接開關安裝尺寸 | lnstallation of sensor switchs |  |  | Bore | Seal kit | 12 | DJASK12 - Including No.9,10,12 | 16 | DJASK16 - Including No.9,10,12 | 20 | DJASK20 - Including No.9,10,12 | 25 | DJASK25 - Including No.9,10,12 | 32 | DJASK32 - Including No.9,10,12 | 40 | DJASK40 - Including No.9,10,12 | 50 | DJASK50 - Including No.9,10,12 | 63 | DJASK63 - Including No.9,10,12 | 80 | DJASK80 - Including No.9,10,12 | 100 | DJASK100 - Including No.9,10,12 | | Bore | Seal kit | 12 | DJDSK12 - Including No.9,10,12 | 16 | DJDSK16 - Including No.9,10,12 | 20 | DJDSK20 - Including No.9,10,12 | 25 | DJDSK25 - Including No.9,10,12 | 32 | DJDSK32 - Including No.9,10,12 | 40 | DJDSK40 - Including No.9,10,12 | 50 | DJDSK50 - Including No.9,10,12 | 63 | DJDSK63 - Including No.9,10,12 | 80 | DJDSK80 - Including No.9,10,12 | 100 | DJDSK100 - Including No.9,10,12 | | No. | 零件名稱 Part name | 數量Quantity | No. | 零件名稱 Part name | 數量 Quantity | No. | 零件名稱 Part name | 數量 Quantity | 1 | 前蓋 Rod cover | 1 | 6 | 後蓋 End cover | 1 | 11 | 前蓋墊片 Rubber lining | 1 | 2 | 活塞本體 Piston | 1 | 7 | 孔用扣環 Snap rind | 2 | 12 | 前後蓋O型環 Cylider gasket | 2 | 3 | 活塞桿 Piston rod | 1 | 8 | 乾式軸承 Oilless bearing | 1 | 13 | 後蓋墊片 Rubber lining | 1 | 4 | 氣缸本體 Cylinder tube | 1 | 9 | 軸封 Rod packing | 1 | 14 | 磁環 Magnet | 1 | 5 | 磁環座 Magnet holder | 1 | 10 | 活塞迫緊 Piston packing | 1 | 15 | | | |