WIKA DPGT43HP 帶過(guò)壓保護(hù)全鋼電接點(diǎn)差壓壓力表 適用于所有介質(zhì)

 Differential pressure gauge with electrical output signal
Universal version, high overpressure safety
Models DPGT43HP.100 and DPGT43HP.160

Differential pressure gauge model DPGT43HP.100

    Applications
    Acquisition and display of process values
    Transmission of process values to the control room （4 ... 20 mA）
    For measuring locations with a high differential pressure overload and/or high working pressures （static pressures）, also in aggressive ambience
    Easy-to-read, analogue on-site display needing no external power

   Special features
    High working pressure （static pressure） and high overpressure safety, optionally up to 40, 100, 250 or 400 bar
    Individual, non-linear characteristic curves （e. g. x2 or √x for flow measurement）
   "Plug and play" with no configuration necessary
    Differential pressure measuring ranges from 0 … 60 mbar
    Hydraulic cushioning protection against rapid pressure changes

   Description
    At any point where a differential pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the model DPGT43HP inliGAUGE （patent applied for, among
others European Patent No. EP 06113003） can be used.
    The electronic WIKA transmitter, integrated into the model 732.14 high-quality mechanical differential pressure gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display.
    Even if the power supply is compley lost, the differential pressure can be read securely. The rugged design of the diaphragm measuring system produces a pointer rotation proportional to the pressure.
    An electronic angle encoder, proven in safety-critical automotive
applications, determines the position of the pointer shaft - it is a non-contact sensor and therefore compley free from wear and friction. From this, the electrical output signalproportional to the pressure, 4 ... 20 mA, is produced. The
electrical zero point can also be set manually.
    These differential pressure gauges are made of highly corrosion-resistant stainless steel. A high overpressure safety is achieved by the all-metal construction and the close-fitting design of the diaphragm measuring element.
    With its high-grade stainless steel construction and robust design this pressure gauge is geared to chemical and process engineering applications. It is suitable for gaseous or liquid media, also in aggressive ambience.
    The wetted parts for these differential pressure gauges are available also in special materials such as Monel, Hasloy or PTFE.

    Standard version
    Design
    highest overpressure safety either side, pressure ratings
    PN 40, 100, 250 oder 400,
    Hydraulic cushioning protection against rapid pressure changes

   Nominal size in mm
    100, 160
  

  Accuracy class
   1.6

   Scale ranges
   0 ... 60 mbar to 0 ... 250 mbar （measuring cell DN 140）
   0 ... 0.4 bar to 0 ... 40 bar （measuring cell DN 80）
   With overpressure safety 400 bar: 0 ... 0.4 bar to 0 ... 40 bar or all other equivalent vacuum or combined pressure and  vacuum ranges

  Pressure limitation
  Steady: Full scale value
  Fluctuating: 0.9 x full scale value
 

  Overpressure safety and max. working pressure （static pressure）
  either side max. 40, 100, 250 or 400 bar

  Pressure elements （wetted）
  Stainless steel / NiCrCo-alloy （Duratherm）
 

  Sealings （wetted）
  FPM / FKM

 Process connections （wetted）
  Stainless steel 1.4571, lower mount （LM） 2 x G ¼ female

 Venting of the media chambers （wetted）
  Stainless steel 1.4571 for scale ranges ≤ 0.25 bar （option for scale ranges ≥ 0.4 bar!）

 Measuring cell
  Chrome steel

 Movement
  Brass

 Dial
  Aluminium, white, black lettering

  Pointer
  Adjustable pointer, aluminium, black （with the liquid filling option: Standard pointer, aluminium, black）

 Zero adjustment
  By means of adjustable pointer

 Case / Bayonet ring
  Stainless steel, ingress protection IP 54

 Window
  Laminated safety glass
 

 Measuring cell filling
  Silicone oil
 

  Mounting
  according to affixed symbols
  ⊕ high pressure, ? low pressure

 Mounting by means of
  Rigid measuring lines
  Mounting holes in measuring flange
  Panel mounting flange （option）
  Mounting bracket for wall or pipe mounting （option）

  Options
  Liquid filling （silicone M50）
  Venting of the media chambers for scale ranges ≥ 0.4 bar Measuring cell filling with special medium, e.g. for use
oxygen applications （static pressure max. 100 bar）
  Measuring cell filling with special medium, e.g. for use in
oxygen applications （static pressure max. 100 bar）

  Customer-specific characteristic curve （also non-linear）
  Combined display of differential pressure and working pressure
  Wetted parts made of special material
  Panel mounting flange
  Mounting bracket for wall or pipe mounting, lacquered steel or stainless steel
  Monel version
  Version per ATEX Ex II 2G Ex ia IIC T4 / T5 / T6
  Gost standard approval
  Pressure equalising valve （data sheet AC 09.11）
  Switch contacts （data sheet AC 08.01）







Dimensions in mm

Standard version

  Ordering information
  Model / Nominal size / Scale range / Connection size / Connection location /       Output signal / Scale layout （linear pressure or
square root incrementation） / Max. working pressure （static pressure） / Options
 CE conformity
 EMC directive
2004/108/EC, EN 61326 emission （group 1, class B） and interference
immunity （industrial application）
ATEX directive
94/9/EC, II 2 G Ex ia IIC