WIKA TR81 防廢氣型熱電阻溫度計,帶TW81保護套管,煙氣電阻溫度計

Resistance Thermometers for Flue Gas Temperature Measurement
Model TR81 with Thermowell Model TW81

Resistance Thermometer for Flue Gas Temperature
Measurement, Model TR81

   Applications
    Blast furnaces, air heaters
    Red-heat and heat treatment processes
    Combustion of waste and special waste products
    Major heating plants, heat generation

   Special Features
    Application ranges up to +600 °C
    Thermowell made of heat resistant steel
    Measuring insert exchangeable
    Gastight process connection （optional）
?
? Description
    These straight resistance thermometers assemblies consist of a connection head Form B, a measuring insert per DIN 43 735 and a thermowell Model TW81. Form A or C
DIN-thermowells as well as thermowells with customer specific design are available.
    Process connection can be provided with a stop flange or pipe coupling, the latter type gives a gastight connection.
    These temperature probes are suitable for gaseous media in low pressure ranges （up to approx. 1 bar）. Various thermowell materials are used with or without enamelling to meet the requirements of thermal stress.
    The measuring insert is replaceable. This makes inspection and, when servicing is necessary, replacement possible during operation and while the plant is running. Selection of normal or standard lengths enables short delivery time and the  possibility of stocking spare components.

    Thermowell material, connection head and sensor can be selected individually for the respective application.
    A transmitter can be fitted as an option.
    One of the advantages of a built-in transmitter is the increased reliability of the signal transmission.

   

   Measuring insert
    The measuring insert is made of a vibration-resistant sheathed measuring cable （mineral-insulated cable）.
    It is possible to ensure a spring-loaded installation of the measuring insert by means of two screws and springs in a connection head （form B）. Due to this installation method, the measuring insert is easily exchangeable.
    When fitting the measuring insert with a thermowell, it is very important to determine the correct insertion length （= thermowell length with bottom thicknesses of ≤ 5.5 mm）.

    In this connection the fact that the measuring insert is spring-loaded （spring travel: max. 10 mm） has to be taken into account in order to ensure that the measuring insert presses against the bottom of the thermowell.
    The standard material used for the measuring insert sheath is stainless steel. Other materials may be offered on request.

   TR81 components （with thermowell TW81）

咨詢訂WIKA TR81 防廢氣型熱電阻溫度計,帶TW81保護套管,煙氣電阻溫度計

: 56291930

：sales@zoriver.cn

http://www.zoriver.com       http://www.zoriver.com.cn