The terminals in all aspects under 500 Caledon role, in 10 seconds, without any loss, damage and other negative phenomena, but also bending.
4.0 電氣性能Electrical Performance
A 額定電流Current ratings:DC 12V 1A.
B 接觸電阻Contact resistance:50mΩ以下.
C 絕緣電阻Insulation Resistance:
在端子之間各端子與殼之間加AC 500V 條件下,持續1分鐘測試.100mΩ以上. The terminal between the terminal and Shell in between 500V AC conditions, sustained a minute test Ω m above .100.
D 抵抗電壓Resistance voltage:
在端子之間端子與殼之間加 AC 500V 60Hz 條件下,持續1分鐘測量.無擊穿現象出現. In between the terminal and the terminal shell in between AC 500V 60Hz conditions, sustained a minute measurement. No breakdown phenomenon.
5.0可靠性試驗Reliability Test
A 壽命試驗Life Test
以涂有薄層潤滑脂的插頭(涂潤滑脂防止摩擦過熱)以每分鐘15~20次,無負載插座撥出5,000次,符合規格3.0和4.0規定值. Coated with a thin layer of grease plugs (TU Grease prevent friction overheated) per minute to 15 ~ 20, a no-load socket allocated 5,000, with the specifications 3.0 and 4.0 provides value
B 溫度試驗Temperature Test
將插座放置于40±2℃,相對溫度90%~95%環境中,96個小時后取出,取去水滴,將插座放置于常溫常濕環境中,于30分鐘內測試,符合規格3.0和4.0要求. Socket to be placed on the 40 ± 2℃, relative humidity of 90% ~ 95% of the environment, 96 hours after the removal, taking a drop of water, will be placed in the socket temperature often wet environment, in the test within 30 minutes, with 3.0 and 4.0 specifications required.