產品簡介
型號 S 111 材質 合金
焊芯直徑 2.4-4.0(mm) 品牌 順鑫
類型 耐磨焊絲 藥皮性質 酸性焊條
直徑 2.4-4.0(mm) 長度 1000(mm)
焊接電流 150(A) 電流幅度 150-180(A)
工作溫度 200(℃) 適用范圍 高溫下耐磨、耐蝕。堆焊高溫高壓閥門
產地 河北
產品介紹
型號 | S 111 | 材質 | 合金 |
焊芯直徑 | 2.4-4.0(mm) | 品牌 | 順鑫 |
類型 | 耐磨焊絲 | 藥皮性質 | 酸性焊條 |
直徑 | 2.4-4.0(mm) | 長度 | 1000(mm) |
焊接電流 | 150(A) | 電流幅度 | 150-180(A) |
工作溫度 | 200(℃) | 適用范圍 | 高溫下耐磨、耐蝕。堆焊高溫高壓閥門 |
產地 | 河北 | | |
Category 類別 | Trade mark 牌號 | Chemical composition 主要成份(%) | Characteristics & application 特性和用途 | Equivalent to AWS 相當AWS | Hardfacing 硬 面 堆 焊 | S 101 | C3 Cr28 Ni4 Si3.5 Fe Rem. | HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump. HRc48-54,耐磨、耐氣蝕、抗氧化。堆焊鏟斗齒,泵套 | | S 111 | C1 Cr29 W5 Co Rem. | HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve. HRc38-47,高溫下耐磨、耐蝕。堆焊高溫高壓閥門 | ECoCr-A | S 112 | C1.5 Cr29 W8 Co Rem. | HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass. HRc45-50,高溫下耐磨、耐蝕。堆焊閥門,熱軋孔型 | ECoCr-B | S 113 | C2.5 Cr30 W17 Co Rem. | HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage. HRc≥55,高溫下耐磨、耐熱,但抗沖擊性差。堆焊螺旋送料機用 | | S 114 | C2.5 Cr30 W12 Co Rem. | HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit. HRc≥53,高溫下耐磨、耐熱,但抗沖擊較差。堆焊牙輪鉆頭 | ECoCr-C | |