● 5種不同孔徑尺寸：100毫米，150毫米，200毫米，250毫米，325毫米
● 軸向載荷能力可達595kg;徑向載荷可達680kg
● 優異的精度和可重復性
● 無齒槽效應電機提供平滑運動
● 無隨時間變化的齒輪磨損造成的精度改變
● 45-300 rpm 連續轉速
● 有真空兼容版本
● 編碼器選項
ALAR優點
Now customers can get large aperture rotary stages with zero backlash and no gear wear or gear vibration as is commonly seen in worm-drive stages. The other added benefit is that direct drive is significantly faster than worm drive, so testing can be completed in less time. In production settings, this equates to faster testing, lower cost manufacturing and higher profits. From the standpoint of system accuracy and repeatability, the stage will maintain its performance over time with no need for maintenance because there are no gears to wear out. With higher accuracy and no backlash, customers can produce more accurate products because their test system is now more accurate.
應用
Applications for the ALAR include single and multi-axis electro-optic sensor testing, missile seeker testing, antenna testing, inertial navigation device testing, photonic component alignment, high-accuracy laser machining and precision wafer inspection. These include testing in vacuum to 10-6 torr. These rotary stages can also be configured as multi-axis gimbals.
高速
ALAR stages can operate between 45-300 rpm, depending on the particular model selected. This speed range is significantly higher than gear-drive stages of similar size.
機械設計
Angular contact bearings are used to maximize performance with respect to tilt error, moment stiffness and rotating friction. A precision-machined shaft further minimizes tilt error. The design incorporates integral connections that minimize cable issues. The ALAR works especially well in applications that require 360° continuous motion but have limited space. The stage is 65-160 mm tall and provides smooth motion without travel restrictions.
無刷直驅
To maximize positioning performance, the ALAR series utilizes Aerotech’s brushless, slotless motors. This motor has all of the advantages of a brushless direct-drive motor – no brushes to wear, no gear trains to maintain and high acceleration and high speeds. Since it is a slotless, ironless design, there is zero cogging, meaning there is absolutely no torque ripple. This makes the ALAR ideal for applications requiring outstanding contoured motion, smooth scan velocity or precise incremental steps.
高有效載荷能力和大瞬時載荷剛性
The ALAR comes in two different configurations. The standard profile (SP) unit has high payload capacity and high moment load stiffness so it can handle applications where its rotation axis is parallel or perpendicular to gravity and the payload center of gravity is cantilevered away from the stage. The low profile (LP) unit has high payload capacity and is good for applications where the axis of rotation is parallel to gravity. Both the SP and LP units have the same aperture options and motor options. Either SP or LP stages can handle between 260-1300 lb of axial load.
精確定位
Performance is assured with encoder line counts from 31000 to 76800 per rev, resulting in resolutions from 0.02 arc sec/count to 0.009 arc sec/count. The motor and high-performance rotary encoder are directly coupled to a common shaft. The absence of gear trains and mechanical couplings means no position errors caused by hysteresis, windup or backlash. As a result, accuracy of ±2 arc sec and bi-directional repeatability of ±0.5 arc sec is attainable.
靈活配置
Aerotech manufactures a wide range of servo amplifiers and advanced controllers to provide a complete, integrated package.
會員1.png)
