PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
行業產品
北京艾瑪特科技有限公司銷售部
參 考 價 | 面議 |
產品型號
品 牌
廠商性質代理商
所 在 地北京市
聯系方式:王曉春查看聯系方式
更新時間:2024-08-26 11:55:00瀏覽次數:118次
聯系我時,請告知來自 智能制造網暫無信息 |
Aerotech has a long history of engineering and manufacturing the world’s highest performance motion systems to directly address our customers’ key application requirements. These efforts have helped t......
● 450 mm wafer compatible
● Maximize throughput with 2 m/s scan velocity and 5 g acceleration
● Faster turnaround and minimized settling times
● Active yaw control
● Linear encoder or laser interferometer feedback
● Travel to 1.2 m by 1.2 m
PlanarHD Design Features
The PlanarHD air-bearing stage has been designed specifically to maximize throughput by providing up to 2 m/s scan velocity and 5 g acceleration. The design utilizes a highly engineered mechanical structure that increases air-bearing stiffness and decreases moving mass. In addition, the locations of the center of force and the center of mass have been optimized to eliminate parasitic forces that can result in throughput reducing error motions.
To further enhance stage performance, the PlanarHD uses air-on-air lateral preload on both the X and Y axes. This preload method uses opposing positive-pressure air films to balance the bearing lift and preload forces. The dynamic bearing force balancing method gives the PlanarHD maximum stiffness, which provides faster turnaround and minimal settling time.
Unlike monolithic L-designs that rely on only a single vacuum preloaded gantry axis, the Aerotech gantry axis is a dual air-bearing H-bridge design that incorporates dual linear motors and dual linear encoders. This further improves turnaround performance while providing the added benefit of orthogonality/yaw control. Faster turns means higher throughput and smaller stage footprint, while orthogonality control means that process swaths are parallel over the entire wafer surface.
Feedback System
Both linear encoder and laser interferometer options are available. The PlanarHD incorporates three high-accuracy linear encoders, one for the bridge axis and two for the gantry axis, as standard. Each encoder is mounted so that the scale centerline is as close to the working plane as possible to reduce Abbe errors. Both encoder materials and mounting methods have been chosen to specifically address thermal-induced accuracy errors.
Drive System
A key to PlanarHD performance is the use of Aerotech’s BLM series brushless linear servomotors. The BLM series linear motors utilize an ironless forcer that provides zero cogging motion with no attractive forces, resulting in extremely smooth motion. In addition, BLM series linear motors generate the highest force per unit volume of any competitive motor design. The PlanarHD also includes both air and water cooling thermal management options.
Advanced Control Architecture
The PlanarHD is coupled to Aerotech’s advanced Automation 3200 control system. The Automation 3200 is a 99% digital system with high performance FireWire® networked drives. The fully digital architecture makes it possible to optimize the current, velocity and position servo loops for maximum performance. Advanced trajectory generation capabilities such as multi-block look-ahead minimize geometry errors during fast turnaround, while our Position Synchronized Laser Firing Output (PSO) functionality automatically adjusts the laser pulse frequency to match the stage speed to maintain optimal system performance.
Aerotech ETM (Enhanced Throughput Module) option helps improve the positioning performance of high-dynamic motion systems like the PlanarHD by directly measuring the unwanted motion of the machine base and communicating it back to the controller. By working in concert with the Dynamic Controls Toolbox and Aerotech controllers, the ETM significantly improves move-and-settle time and contouring performance, increases throughput of existing and new machines and greatly reduces the effects of frame motion on the servo system.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
商鋪:http://towegas.com/st34504/
主營產品:多軸運動控制器PMAC、kollmorgen伺服電機、力矩電機、直線電機、parker系列伺服系統、thomson直線單元、delta tau控制卡
智能制造網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
北京艾瑪特科技有限公司銷售部