Input: | Model | SVDA/ | SVDA/ | SVDA/- | SVDA/- | SVDA/- | SVDA/- |
Impedance （Rc） | Ohm | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 |
Turn-on Voltage （Min.） | VDC | 4V@5.4mA | 4V@5.4mA | 4V@3.5mA | 4V@3.5mA | 4V@3.5mA | 4V@3.5mA |
Turn-on Voltage （Max.） | VDC | 32V@10mA Max （current limited） | 32V@10mA Max （current limited） | 32V@6.5mA Max （current limited） | 32V@6.5mA Max （current limited） | 32V@6.5mA Max （current limited） | 32V@6.5mA Max （current limited） |
Turn-off Voltage （Max.） | VDC | 1 | 1 | 1 | 1 | 1 | 1 |
Reverse Voltage Protection | VDC | -75 | -75 | -75 | -75 | -75 | -75 |
Input: 100 to 280 VAC | Model | SVAA/ | SVAA/ | SVAA/ | SVAA/ | SVAA/ | SVAA/ |
Schematic Number | 0 | 2 | 2 | 2 | 2 | 2 | 2 |
Impedance （Rc） | KOhm | 20 | 20 | 20 | 20 | 20 | 20 |
Turn-on Voltage （Min.） | VAC | 100 | 100 | 100 | 100 | 100 | 100 |
Turn-off Voltage （Max.） | VAC | 20 | 20 | 20 | 20 | 20 | 20 |
Reverse Voltage Protection | N/A | N/A | N/A | N/A | N/A | N/A | |
Output: （For All Models） | |||||||
I OUT （Continuous w/proper heatsink） | A RMS | 10 | 25 | 50 | 75 | 50 | 75 |
Voltage Drop @ I OUT | VAC | 1.1 | 1.2 | 1.3 | 1.1 | 1.3 | 1.1 |
I SURGE - 1 Cycle Non-repetitive | A PEAK | 100 | 250 | 650 | 950 | 650 | 950 |
I SURGE - 1 Second Non-repetitive | A PEAK | 40 | 100 | 130 | 140 | 130 | 140 |
Voltage Range （V OUT ） | VAC | 24-330 | 24-330 | 24-330 | 24-330 | 24-660 | 24-660 |
Peak Blocking Voltage | 800 | 800 | 800 | 800 | 1200 | 1200 | |
Frequency Range | Hz | 47-63 | 47-63 | 47-63 | 47-63 | 47-63 | 47-63 |
Leakage @ V OUT （max.） | mA | 8 | 8 | 8 | 8 | 8 | 8 |
Turn-on （max.） | 1/2 cycle | 1/2 cycle | 1/2 cycle | 1/2 cycle | 1/2 cycle | 1/2 cycle | |
Turn-off （max.） | 1/2 cycle | 1/2 cycle | 1/2 cycle | 1/2 cycle | 1/2 cycle | 1/2 cycle | |
Holding current （min.） | mA | 50 | 50 | 50 | 50 | 50 | 50 |
Zero voltage switching | Yes | Yes | Yes | Yes | Yes | Yes | |
Dv/Dt @ V OUT （max.） | Vus | 750 | 750 | 1000 | 1000 | 500 | 500 |
Commutating Dv/Dt | .5 | .5 | .5 | .5 | .5 | .5 | |
I 2 T Fusing （8.3 ms.） | A 2 S | 35 | 260 | 1035 | 3745 | 1035 | 3745 |
Thermal resistance R 0JC （Tj=115 o C） | 0 C/W | 1.48 | 1.05 | .65 | .30 | .65 | .65 |
General Characteristics: | |||||||
Dielectric strength （Input-Output-Base） | V RMS | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 |
Capacitance Input to Output | pf | 3 | 3 | 3 | 3 | 3 | 3 |
Ambient temp. range （Operating） | 0 C | -40 to +100 | -40 to +100 | -40 to +100 | -40 to +100 | -40 to +100 | -40 to +100 |
Adequate heatsinking, including consideration of air temperature and flow, is essential to the proper operation of a solid state relay. Units should not be mounted in an enclosed area without proper air flow. Units should also never be mounted to a plastic base or to a painted surface. Proper thermal transfer gel or pad should be applied to the heatsink before mounting the relay. Failure to provide adequate heatsinking will cause a solid state relay to fail. |
P111-31100-096A
WK20-11304-100
PF40-B0000-004
RVMA/6V40
SVDD/1V12
RVD3/6V75T/H
SVDD/1V40
SVAA/3V50
M225-10018
THERMAL-PAD-025
Continental
I.O.-ODC-R0-060
J14I-19318
RSAA-660-75-100
P111-31100-048-A-00
SVDA/6V75
J141-19312
J141-03318
HD21-J
RVA3/6V75T/H
RSAA-660-100-100
THERMAL-PAD-005
SK-5346-072-0-06
HEATSK-DIN-1.6
SVAA/6V50
FUSE-KIT-14-025
RVAA/6V40
S505-HEATSK-1.0
LDE4961300CC
I.O.-OAC-R0-280
HEATSK-DIN-1.0
M115-10018
M225-10012
LME4961300CC
I.O.-IDC+R0-028
SVAA/3V25
RSDA-660-40-1D1
Continental Industries
I.O.-JUMPER-010
I.O.-IAC+R0-280
I.O.-IAC-R0-280
SVDA/6V50
K081-16324
RSDA-660100-100
HEATSK-6PK-1.2
WJ20-51502
P111-00100-0-096-7-03
I.O.-IDC-R0-028
CP10000000CC
FKS6613000CC
RSDA-660-75-100
LDE4960300CC
HD20-K
RVA3/5V75T/H
TKS93111300CC
SVDA/3V10
M115-10012
RSDA-660/50/10
SVAA/3V10
RVD3/6V75T/L
P70-K0100-188
WK20-51502-100
SVDA/3V50
RVMA/6V25
J141-03312
RVAA/6V25
LME4911300CC
WJ20-51502-100
RVDA/6V25
智能制造網(wǎng)