PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
廣州阿泰克閥門有限公司
參 考 價 | 面議 |
產品型號LIK
品 牌
廠商性質經銷商
所 在 地廣州市
聯系方式:孫生查看聯系方式
更新時間:2022-09-07 15:40:21瀏覽次數:227次
聯系我時,請告知來自 智能制造網暫無信息 |
經營模式:經銷商
商鋪產品:189條
所在地區:廣東廣州市
聯系人:孫生 (銷售經理)
萊克生產的進口疏水閥,驅動方式可選用自動,連接方式可選用法蘭、焊接、內螺紋,結構形式可選用硬密封,密封結構可選用,壓力范圍PN0MPa-100MPa,公稱通徑為15-500mm,材質可選用不銹鋼(304、316、316L)、鑄鋼。由于閥門的使用范圍非常的廣泛,同一種閥門在不同的場合與工況有不同的搭配,如果您是非專業人士,歡迎您向本公司。
Performance / Advantages: | ||||||||||||||||||||||||
Application: By automation, speediness and continuing features, this valve is used for the steam heating equipment, condensation water recovery system and the place where needs removing condensation water at quick speed, and so stop steam leakage effectively and obtain optimum heating. | ||||||||||||||||||||||||
Working Principle: By the action of buoyancy, the position of floating ball changes with the water level of condensation water and adjust the opening of valve seat automatically, continue to discharge condensation water, when the condensation water stops, the floating ball fall onto bottom by gravity, then close opening of drain valve. The opening of drain valve is below the water lever, and so the water is separated from steam automatically, and form water seal without steam leakage. | ||||||||||||||||||||||||
Performance Parameter/ Material List of Main Part:
| ||||||||||||||||||||||||
Main Basis for Type Selection: ■ Condensation water loading (discharge)kg/h (select the multiplying power 2~3 times). ■ Maximum working pressure Mpa ■ Operation pressure differential ■ Valve material and nominal pressure ■ Connection mode and dimension | ||||||||||||||||||||||||
Use and Maintenance: ■ Confirm the valve material, pressure and check if the maximum is suitable for operation condition. ■ Before installation, clean the pipeline and clear away sundries. ■ The installation position shall be closed to heating equipment as much as possible. ■ Install the minimum point of pipe horizontally and the direction of flow should be the same to the label of valve. ■ Install steam trap for each heating equipment in case cause influence each other. ■ under the safe operation of system, open the valve in front of the steam trap, make it rise up to normal station slowly. ■ Do time-based maintenance for the normal working of steam trap. |
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
廣州阿泰克閥門有限公司