To measure volumetric flowrate for conductive liquids and pulps. Several output signals are available. 
The main applications can be found in the following fields: chemical industry, power generation and distribution, mine, water treatment, paper industry, pharmaceutical industry, food and environmental protection. 
The measurement is independent of the density, viscosity, temperature, pressure and conductivity of the measured fluid. No moving parts in the measuring tube. No pressure loss. Low requirement for the upstream and downstream straight pipes. It has a special suitability for
pulp measurement.

For conductive liquids (>5μS/cm), even 

85÷265Vac or 24Vdc power supply

with a content of suspended solids.

4÷20mA and pulse output

Range from <0,1m3/h to>600m3/h 

PTFE or PFA lining material

DIN and CLAMP sanitary connection

SS316, Hasloy C, Titanium

SS304 sensor pipe

and Tantalum electrodes

Best measurement accuracy ±0.5%

MODBUS or HARTprotocol di communication