單效纖維分離機概述

本機是由我公司設計人員在吸收海外同類產品優點的基礎上結合國內使用廠家實際情況，采用*的制做工藝及全新的生產理念，自行開發研制的集碎漿、篩選于一體的損紙碎解設備，其優點為設備動力低、產量大(同動力比為普通纖維分離機產量的3-5倍)排渣率高，操作方便，與國內外其它同類產品相比較具有性能更優，自動性更強，可靠性更高，操作更方便等特點，是老式纖維分離機的更新?lián)Q代產品。

Summary
 

On the basis of absorbing the advantages of overseas similar products and combining with the actual situation of domestic manufacturers, this machine is a paper breaking equipment developed by our company, which integrates pulping and screening. Its advantages are low power, large output (3-5 times the output of ordinary fiber separator with the same power ratio), high slag discharge rate and easy operation. Compared with other similar products at home and abroad, it has the advantages of better performance, stronger automaticity, higher reliability and more convenient operation. It is a renewal product of the old fiber separator.

單效纖維分離機構造  
Structure
 

(1)筒體

筒體采用耐磨性及耐壓性設計標準，材質為不銹鋼或碳鋼。漿料由入口沿切線方向進入筒體，經轉子高速旋轉產生的離心力碎解原料，并將輕重雜質分離，輕雜質由簡體壓蓋*排出，重雜質由于離心力的原理，沿筒體沿切線方向進入砂罐排出。

(1) Cylinder

The cylinder is designed with abrasion resistance and pressure resistance, and the material is stainless steel or carbon steel. The slurry enters the cylinder along the tangential direction from the entrance, breaks down the raw materials by centrifugal force generated by the high-speed rotation of the rotor, and separates the light and heavy impurities. The light impurities are discharged from the center of the cylinder cover. The heavy impurities are discharged into the sand tank along the tangential direction due to the principle of centrifugal force.
 

(2)轉子

轉子采用特殊形狀設計，可有效的分離輕重雜質。

轉子內側設有清洗水管，以防止篩孔堵塞。

轉子刀刃采用可更換的耐磨性高強度合金鋼。

轉子本體為鑄鋼或鑄不銹鋼(用戶自行選擇)。

(2) Rotors

The special shape design of the rotor can effectively separate the light and heavy impurities.

The inner side of the rotor is provided with a cleaning water pipe to prevent clogging of sieve holes.

The rotor blade is made of replaceable wear resistant high strength alloy steel.

The rotor body is cast steel or cast stainless steel (user selected).
 

(3)篩板

篩板孔徑為φ2.5～6 mm(依用戶需要選擇)

通常新聞紙、雜志φ2.5mm～4mm的范圍使用

瓦楞紙、箱板紙φ3.5mm～6mm的范圍使用

(3) Sieve plate

The aperture of sieve plate is from φ2.5 to 6 mm (depending on user needs).

Usually, newsprint and magazines paper use sieve plates with aperture ranging from 2.5mm to 4mm.

Corrugated board and box board use sieve plates with a bore diameter of 3.5mm to 6mm.