詳細介紹
南京蘇星常規低溫穿梭車功能介紹 :
1 手動出入庫
Manual in-out-stock 手動遙控,單次出入庫
Press the remote manually to achieve single in-out-stock
2 自動出入庫
Automatic in-out-stock 手動遙控,連續自動出入庫
Press the remote manually to achieve automatic in-out-stock for many times
3 *先出/后出
First in,first out/first in,last out 單車兩端出入貨
Achieve in-out-stock at two ends of single line
4 尋車功能
Locating shuttle 視線外蜂鳴呼叫尋車
Use buzz to locate shuttle out of vision
5 電量顯示功能
Battery level indication 自動顯示電量值,便于及時充電
Display the remaining amout of electricity to facilitate the operator to charge in time
6 自動保護功能
Self-protection funcion 遇障礙物自動停車
Function to stop car when meet obstacle
7 救援功能
Rescue function 特制的安全救援車
Specially designed rescue car in case of failure funcion
8 自動理貨功能
Automatical arrangement 自動將軌道上的托盤理順
Function to arrange the pallets on rail in place
9 自動點數功能
Automatical count 自動安規律清點貨物數量
Function to count cargo under certain rule
10 大、小托盤功能 同一巷道允許不同規格托盤存在
11 定數取貨功能 按預定托盤數存取貨
12 預留無線傳輸接口 具備與倉庫管理系統對接功
南京蘇星常規低溫穿梭車特點:
運用穿梭車存儲方式,可以節省操作時間,叉車無需進入巷道,提高人員及貨物的安全性。
庫房貨物存儲效率大大提高,充分利用有效空間,利用率可達80%以上
相比其他存儲方式,結構穩固,安全系數更高
適用于多量少樣的貨物,如食品,飲品,化工,煙草等單品種批量大,物品相對單一的行業,冷庫環境需求更加突出。
使用注意事項:
|
² 定期檢查臺車以便及時發現其故障隱患。
² 應定期檢查確認車輪和導向輪是否損壞,用軟布拭去光電傳感器上的灰塵。不允許對臺車用水清洗或高壓清洗,只能用微濕的軟布擦拭,通??捎貌潦闷?chē)的清潔劑。
² 保證臺車清潔,根據臺車實際工作條件定期對臺車進行清理,清除雜物。
² 若臺車需在冷庫環境中工作,應選擇冷庫型臺車,臺車較長時間不用時,應從冷庫取出存放。
臺車如*不用,存放溫度應為+5℃—+50℃, 相對濕度35%-85%, 無凝露,存放環境內不能有腐蝕性氣體,如存放溫度低于0℃,應將PLC 電池取出存放于+5℃-50℃環境。