8694 - 適用于一體化安裝于工藝調節閥上的數字化電-氣位置調節儀

burkert8694/定位器

Compact position controller with integrated installation on pneumatic control process control valve. Rating is set by standard signals from 4 to 20 mA or AS-Interface. Non contact work of sensor components to determine the position of the valve spindle. Through the automatic tuning function to achieve easy debugging and the use of DIP switch settings: closed function, feature curve selection, reversing the direction of work, manual / automatic mode switching, binary input. Using device DTM to form parameterized additional options. When the work characteristic curve is linearized, the software interface and other interfaces can be used by using the freely programmable characteristic curve. Status display can be realized by LED lamp. Optional integrated analog position feedback information.

Compact and durable stainless steel design
Debugging with auto tuning function
Non contact stroke absorber
The integrated control air transfers to the driver
AS-Interface field bus interface (options)

burkert8694/定位器

帶led顯示屏，具體參數如下：

位置檢測模塊：無接觸，無磨損
行程范圍閥軸：345mm
安裝：根據需要，顯示屏朝上
防護等級：IP65型和IP67 ACC.EN 60529標準，4X型
功耗：<5瓦
余波：zui大10％
設定值的設定：0/4-20mA，0??5/10 V
輸出電阻：0/4-20 mA：180Ω
0-5/10V：19 KΩ

特點：

1. Compact, robust stainless steel design
2. Easy start-up by automatic X-Tune function
3. Contact-free position sensor
4. Integrated control air routing with spring chamber aeration
5. Profibus DPV1 or DeviceNet communication (option)