聯系電話
從峰工業科技(上海)有限公司
參考價: | 面議 |
- 產品型號
- 寶德/Burkert 品牌
- 代理商 廠商性質
- 上海市 所在地
訪問次數:1071更新時間:2017-10-20 15:26:51
- 聯系人:
- 李經理
- 電話:
- 021-80182015-1000
- 手機:
- 18601767286
- 傳真:
- 021-67881159
- 地址:
- 上海市松江區茸梅路1108號517-518室
- 個性化:
- www.congfengsh.com
- 網址:
- www.congfengsh.com
掃一掃訪問手機商鋪
寶德調節閥burkert 00227375The compact Process Controller Type 8693
is optimized for integrated mounting on the
pneumatic actuators in the process valve
series Type 23XX/2103 and is specially
designed for the requirements of a hygienic
process environment.
The actual value of the process factor is
directly supplied to the device as 4-20 mA,
PT100 or a frequency signal. The process
controller calculates the setpoint for the
subordinated positioner through the variance
comparison. Due to the analogue feedback all
analogue values on the controlling level can be
transferred. With integrated diagnostic functions
operation conditions of the control valve
can be monitored. Through status signals,
valve diagnostic messages are transmitted
according to NAMUR NE107 and recorded as
history entries.
寶德調節閥burkert 00227375
緊湊的過程控制器類型為8693
對集成安裝進行優化嗎
工藝閥門中的氣動執行機構
系列23XX / 2103,特別
為衛生要求而設計的
過程的環境。
過程因子的實際值為
直接向該設備提供4 -20 mA,
PT100或頻率信號。這個過程
控制器計算出的setpoint
從屬的位置,通過方差
比較。由于模擬反饋的全部
控制級的模擬值可以是
轉移。綜合診斷功能
控制閥的運行情況
可以監控。通過狀態信號,
閥門診斷信息被傳輸
根據NAMUR NE107,并記錄為
歷史條目。
The parameterization of process controller and
positioner can be carried out automatically.The
easy handling and the selection of additional
software functions are done either on a big
graphic display with backlight and keypad
or over a PC interface. The Positioner registers
the valve position without deterioration
through a contact-free, analog position sensor.
The control of single or double-acting actuators
is done without internal air consumption.
Communication interfaces such as Profi bus
DPV1 or DeviceNet and analogue as well as
binary feedback can also be chosen.
過程控制器的參數化
定位器可以自動執行
易于操作和附加的選擇
軟件功能可以在很大的地方完成
帶有背光和鍵盤的圖形顯示
或者通過PC接口。定位器寄存器
閥門位置不損壞
通過非接觸式位置傳感器。
對單或雙作用執行機構的控制
是在沒有內部空氣消耗的情況下完成的。
通信接口,如Profi總線
DPV1或DeviceNet和類似物
還可以選擇二進制反饋。