聯系電話
從峰工業科技(上海)有限公司
參考價: | 面議 |
- 產品型號
- 寶德/Burkert 品牌
- 代理商 廠商性質
- 上海市 所在地
訪問次數:810更新時間:2017-09-15 14:41:54
- 聯系人:
- 李經理
- 電話:
- 021-80182015-1000
- 手機:
- 18601767286
- 傳真:
- 021-67881159
- 地址:
- 上海市松江區茸梅路1108號517-518室
- 個性化:
- www.congfengsh.com
- 網址:
- www.congfengsh.com
掃一掃訪問手機商鋪
原理: 它是一種直動和先導式wister47.win相結合的原理,當入口與出口沒有壓差時,通電后,電磁力直接把先導小閥和主閥關閉件依次向上提起,閥門打開。當入口與出口達到啟動壓差時,通電后,電磁力先導小閥,主閥下腔壓力上升,上腔壓力下降,從而利用壓差把主閥向上推開;斷電時,先導閥利用彈簧力或
寶德 00501264 采購德國burkert6014系列
The working principle of the burkert6014 direct acting solenoid valve of burkert6014 is purchased from baode 00501264
Principle: it is a direct acting and pilot operated wister47. Win the principle of combining, when the inlet and outlet no pressure difference, after electrify, electromagnetic force directly to the pilot valve and main valve closed, in turn, lift, the valve opens. When the inlet and outlet reach the starting pressure difference, when the power is energized, the electromagnetism first pilot small valve, the pressure of the lower cavity of the main valve increases, the upper chamber pressure drops, so that the main valve is pushed up by the pressure difference; When the power is off, the pilot valve USES the spring force or medium pressure to push the closure, moving down and closing the valve. Features: in zero pressure difference or vacuum, high pressure can also be the action, but the power is larger, the requirement must be installed horizontally.
BURKERT6014型直動式電磁閥工作原理
原理: 它是一種直動和先導式wister47.win相結合的原理,當入口與出口沒有壓差時,通電后,電磁力直接把先導小閥和主閥關閉件依次向上提起,閥門打開。當入口與出口達到啟動壓差時,通電后,電磁力先導小閥,主閥下腔壓力上升,上腔壓力下降,從而利用壓差把主閥向上推開;斷電時,先導閥利用彈簧力或介質壓力推動關閉件,向下移動,使閥門關閉。 特點: 在零壓差或真空、高壓時亦能可*動作,但功率較大,要求必須水平安裝。
寶德 00501264 采購德國burkert6014系列
1、腐蝕性流體:宜選用耐腐蝕電磁閥和全不銹鋼;食用超凈流體:宜選用食品級不銹鋼材質電磁閥。
2、高溫流體:要選擇采用耐高溫的電工材料和密封材料制造的電磁閥,而且要選擇活塞式結構類型的。
3、流體狀態:大至有氣態,液態或混合狀態,特別是口徑大于DN25訂貨時一定要區分開來。
更多寶德產品和選型可以銷售人員。