上海朔川電氣設備有限公司

免費會員

您現在的位置：上海朔川電氣設備有限公司>>智能控制PLC模塊>>西門子工業電器電源6EP>> 西門子6ES71944CB500AA0

西門子6ES71944CB500AA0

參考價:	面議

參考價:

面議

具體成交價以合同協議為準

產品型號
品牌
經銷商 廠商性質
上海市 所在地

訪問次數：243更新時間：2017-11-07 13:24:50

在線詢價加入對比查看聯系方式

聯系我們時請說明是智能制造網上看到的信息，謝謝!

分享

智能控制PLC模塊

上海朔川電氣設備有限公司

免費會員·9年

聯系人：: 吉夢琪

在線咨詢給我留言

掃一掃訪問手機商鋪

產品簡介

西門子6ES71944CB500AA0

產品介紹

西門子6ES71944CB500AA0 西門子6ES71944CB500AA0

6ES7194-4CB50-0AA0

SIMATIC DP, 連接模塊用于 digitale 電子模塊 16DI DC 24V 和 4 DIO/4DO DC 24V/0,5A, ET 200 PRO,8xM12

公司名稱：上海朔川電氣設備有限公司

聯 系人：吉夢琪

：

地址：上海市金山區涇波路129號

信譽*，客戶*是公司成立之初所確立的宗旨，在公司的嚴格要求和員工們不折不扣地貫徹執行下發展延續至今。“假一罰十”一直是我公司的主動承諾。
承諾一：1、保證全新*

承諾二：2、保證安全準時發貨
承諾三：3、保證售后服務質量
流程一：1、客戶確認所需采購產品型號
流程二：2、我方會根據詢價單型號查詢價格以及交貨期，擬一份詳細正規報價單
流程三：3，客戶收到報價單并確認型號無誤后訂購產品
流程四：4、報價單負責人根據客戶提供型號以及數量擬份銷售合同
流程五：5、客戶收到合同查閱同意后蓋章回傳并按照合同銷售額匯款到公司開戶行
流程六：6、我公司財務查到款后，業務員安排發貨并通知客戶跟蹤運單

您隨口的一問多少錢，我就立馬放下筷子趕緊回話。

您隨口的一句有沒有現貨，我就立馬進去系統拼命地找。

您隨口問了問能優惠不？我就到處想辦法。

您很隨便，我卻很當真；您不知道我的回答，只為得到您的滿意..……

只因為我和您不止是客戶的關系，而是把您當我的朋友，在全力以赴做到我能做到的

您的選擇您的支持是我zui大的動力！ ————致我親愛的客戶（好朋友）

產品簡述：質保一年，一年內因產品質量問題免費更新產品不收取任何費用

哪里有賣要多少錢哪里有哪里能買到要在哪里買在哪里有賣的價格，參數，型號，哪家便宜，比較便宜，哪里有，銷售，訂貨號，多少錢？哪家價格好？廠家，性能，優點，包裝，用途，售后服務!哪里有賣代理商總代理商

數字量擴展模塊

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

應用

設計

技術規范

概述

數字量輸入/ 輸出的擴展模塊，用于連接執行器/ 檢測器
分級診斷功能
- 具有特定模塊診斷功能的標準模塊
- 高性能型模塊，帶有特定通道診斷功能和可參數化的輸入延遲或硬件中斷
對于 8 DI 和 8DO 模塊，每個 M12 可進行雙或單分配,方法是選擇 CM IO 4x M12 或 CM IO 8x M12

應用

數字量擴展模板允許另外的執行器和傳感器通過集成式輸入 / 輸出,與ET 200pro連接。

提供有以下模塊：

EM 8 DI, 24 V DC
EM 8 DI, 24 V DC 高性能型
EM 16 DI, 24 V DC
EM 4 DO, 24 V DC; 2 A
EM 4 DO, 24 V DC; 2 A 高性能型
EM 8 DO, 24 V DC; 0.5 A
EM 4 DI/4 DO, 24 V DC; 0.5 A
EM 4 DIO / 4 DO, 24 V DC; 0.5 A

I/O 連接模塊（必須單獨訂貨）：

CM IO 4x M12
CM IO 4x M12 反轉
CM IO 8x M12
CM IO 8x M12D
CM IO 8x M8
CM IO 2x M12
CM IO 1x M23

設計

傳感器和執行器可通過常規 5 針 M12 連接器、3 針 M8 連接器或 12 針 M23 連接器進行連接。

對于數字量輸入或輸出模塊，可將以下連接形式與 IO 接口模塊結合使用：

CM IO 4x M12；可與 8 通道數字量輸入模塊以及 4 或 8 通道數字量輸出模塊結合使用
CM IO 4x M12，反轉；可與 4 通道數字量輸出模塊結合使用
CM IO 8x M12；可與 8 通道數字量輸入模塊以及 8 通道數字量輸出模塊結合使用
CM IO 8x M12D；可與 16 通道數字量輸入模塊以及 8 通道 4 DIO/4 DO 數字量混合模塊結合使用
CM IO 8x M8；可與 8 通道數字量輸入模塊以及 4 或 8 通道數字量輸出模塊結合使用
CM IO 2x M12；可與標準 8 通道數字量輸入模塊以及標準 4 或 8 通道數字量輸出模塊結合使用
CM IO 1x M23；可與標準 8 通道數字量輸入模塊以及標準 4 或 8 通道數字量輸出模塊結合使用

技術規范

Article number	6ES7141-4BF00-0AA0	6ES7141-4BF00-0AB0	6ES7141-4BH00-0AA0
	ET200PRO, EM 8DI 24V DC	ET200PRO, EM 8DI 24V DC HF	ET200PRO, EM 16DI DC 24V
Supply voltage
Rated value (DC)	24 V	24 V	24 V
Reverse polarity protection	Yes; Against destruction; encoder power supply outputs applied with reversed polarity	Yes; against destruction; load increasing	Yes; Against destruction; encoder power supply outputs applied with reversed polarity
Input current
from supply voltage 1L+, max.	20 mA	40 mA	30 mA
from backplane bus 3.3 V DC, max.	20 mA	20 mA	20 mA
Encoder supply
Number of outputs	8	8	8
Short-circuit protection	Yes; per module, electronic	Yes; per channel, electronic	Yes; per module, electronic
Output current
● up to 55 °C, max.	1 A	1 A	1 A
Power loss
Power loss, typ.	2.5 W	2.5 W	3 W
Address area
Occupied address area
● Inputs	1 byte	1 byte	2 byte
Digital inputs
Number of digital inputs	8	8	16
Input characteristic curve in accordance with IEC 61131, type 1	Yes	No	Yes
Input characteristic curve in accordance with IEC 61131, type 2	No	Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 55 °C, max.	8	8	16
Input voltage
● Rated value (DC)	24 V	24 V	24 V
● for signal "0"	-3 to +5V	-3 to +5V	-3 to +5V
● for signal "1"	13 to 30V	+11 to +30V	+11 to +30V
Input current
● for signal "1", typ.	7 mA	7 mA	4 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable	No	Yes	No
— at "0" to "1", min.	1.2 ms	0.5 ms; 0.5 ms/ 3ms/ 15 ms/ 20 ms	1.2 ms
— at "0" to "1", max.	4.8 ms	20 ms	4.8 ms
— at "1" to "0", min.	1.2 ms	0.5 ms; 0.5 ms/ 3ms/ 15 ms/ 20 ms	0.7 ms
— at "1" to "0", max.	4.8 ms	20 ms	3 ms
Cable length
● shielded, max.	30 m	30 m	30 m
● unshielded, max.	30 m	30 m	30 m
Encoder
Connectable encoders
● 2-wire sensor	Yes	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA	1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No	No
Interrupts/diagnostics/status information
Diagnostic functions	Yes	Yes; channel by channel, parameterizable	Yes
Alarms
● Diagnostic alarm	Yes	Yes	Yes
Diagnostic messages
● Diagnostic information readable	Yes	Yes	Yes
● Wire-break		Yes; Monitoring, I < 0.3 mA
● Short-circuit	Yes; Sensor supply to M; module by module	Yes	Yes; Sensor supply to M; module by module
Diagnostics indication LED
● Group error SF (red)	Yes	Yes	Yes
● Status indicator digital input (green)	Yes; Per channel	Yes; Per channel	Yes; Per channel
Parameter
Diagnostics wire break		channel by channel
Diagnostics short-circuit	Sensor supply to M; module by module	channel by channel
Potential separation
between backplane bus and all other circuit components	Yes	Yes	Yes
Potential separation digital inputs
● between the channels	No	No	No
● between the channels and backplane bus	Yes	Yes	Yes
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)
Dimensions
Width	45 mm	45 mm	45 mm
Height	130 mm	130 mm	130 mm
Depth	35 mm	35 mm; without terminal module	35 mm
Weights
Weight, approx.	140 g	140 g	140 g

Article number	6ES7142-4BD00-0AA0	6ES7142-4BD00-0AB0	6ES7142-4BF00-0AA0
	ET200PRO, EM 4DO 24V DC/2.0A	ET200PRO, EM 4DO 24VDC/2.0A HF	ET200PRO, EM 8DO DC24V/0.5A
Supply voltage
Load voltage 2L+
● Rated value (DC)	24 V	24 V	24 V
● Short-circuit protection	Yes; per channel, electronic	Yes; per channel, electronic	Yes; per channel, electronic
● Reverse polarity protection	Yes; against destruction; load increasing	Yes; against destruction; load increasing	Yes; against destruction; load increasing
Input current
from load voltage 2L+ (without load), max.	20 mA	40 mA	30 mA
from backplane bus 3.3 V DC, max.	20 mA	30 mA	30 mA
Power loss
Power loss, typ.	2 W	2.5 W	2 W
Address area
Address space per module
● with packing	4 bit	4 bit	8 bit
● without packing	1 byte	1 byte	1 byte
Digital outputs
Number of digital outputs	4	4	8
Short-circuit protection	Yes	Yes	Yes
● Response threshold, typ.	2.8 A	2.8 A	0.7 A
Limitation of inductive shutdown voltage to	2L+ (-47 V)	2L+ (-47 V)	2L+ (-47 V)
Controlling a digital input	Yes	Yes	Yes; Isolation between 1L+ and 2L+ is no longer provided, as 1M and 2M are jumpered
Switching capacity of the outputs
● on lamp load, max.	10 W	10 W	5 W
Load resistance range
● lower limit	12 ?	12 ?	48 ?
● upper limit	4 k?	4 k?	4 k?
Output voltage
● for signal "1", min.	2L+ (-0,8 V)	2L+ (-0,8 V)	2L+ (-0,8 V)
Output current
● for signal "1" rated value	2 A	2 A	0.5 A
● for signal "0" residual current, max.	0.5 mA	0.5 mA	0.5 mA
Parallel switching of two outputs
● for uprating	No	No	No
● for redundant control of a load	Yes	Yes	Yes
Switching frequency
● with resistive load, max.	100 Hz	100 Hz	100 Hz
● with inductive load, max.	0.5 Hz	0.5 Hz	0.5 Hz
● on lamp load, max.	1 Hz	1 Hz	1 Hz
Total current of the outputs (per group)
all mounting positions
— up to 55 °C, max.	4 A	4 A	4 A
Cable length
● shielded, max.	30 m	30 m	30 m
● unshielded, max.	30 m	30 m	30 m
Interrupts/diagnostics/status information
Diagnostic functions	Yes	Yes	Yes
Substitute values connectable		Yes
Alarms
● Diagnostic alarm	Yes	Yes	Yes
Diagnostic messages
● Diagnostic information readable	Yes	Yes	Yes
● Wire-break		Yes
● Short-circuit	Yes; Short-circuit of outputs to ground; module by module	Yes	Yes; Short-circuit of outputs to ground; module by module
Diagnostics indication LED
● Group error SF (red)	Yes	Yes	Yes
● Status indicator digital output (green)	Yes	Yes	Yes
● Channel fault indicator F (red)		Yes
Parameter
Diagnostics wire break		channel by channel
Diagnostics short-circuit		channel by channel
Potential separation
between backplane bus and all other circuit components	Yes	Yes	Yes
Potential separation digital outputs
● between the channels	No	No	No
● between the channels and backplane bus	Yes	Yes	Yes
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety-oriented group deactivation	Yes	Yes	Yes
Highest safety class achievable in safety mode
● Performance level according to ISO 13849-1	d	d	d
● SIL acc. to IEC 61508	2	2	2
Dimensions
Width	45 mm	45 mm	45 mm
Height	130 mm	130 mm	130 mm
Depth	35 mm	35 mm; without terminal module	35 mm
Weights
Weight, approx.	140 g	140 g	140 g

Article number	6ES7143-4BF50-0AA0	6ES7143-4BF00-0AA0
	ET200PRO, EM 4DI / 4DO DC 24V, 0.5A	ET200PRO, EM 4 DIO / 4 DO DC 24V, 0.5A
Supply voltage
Rated value (DC)		24 V
Reverse polarity protection		Yes; Against destruction; encoder power supply outputs applied with reversed polarity
Load voltage 2L+
● Rated value (DC)	24 V	24 V
● Short-circuit protection	Yes	Yes
● Reverse polarity protection	Yes	Yes; against destruction; load increasing
Input current
from supply voltage 1L+, max.		20 mA
from load voltage 2L+ (without load), max.	20 mA	20 mA
from backplane bus 3.3 V DC, max.	20 mA	30 mA
Encoder supply
Number of outputs	4	4
Short-circuit protection	Yes; per module, electronic	Yes; per module, electronic
Output current
● up to 55 °C, max.	1 A	1 A
Power loss
Power loss, typ.	2 W	3 W
Digital inputs
Number of digital inputs	4	4; 4 DIOs can be parameterized
Input characteristic curve in accordance with IEC 61131, type 3	Yes	Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 55 °C, max.		4
Input voltage
● Rated value (DC)	24 V	24 V
● for signal "0"	-3 to +5V	-3 to +5V
● for signal "1"	+11 to +30V	+11 to +30V
Input current
● for signal "1", typ.	7 mA	7 mA
Input delay (for rated value of input voltage)
for standard inputs
— at "0" to "1", min.		1.2 ms
— at "0" to "1", max.	3 ms	4.8 ms
— at "1" to "0", min.		1.2 ms
— at "1" to "0", max.	3 ms	4.8 ms
Cable length
● shielded, max.	30 m	30 m
● unshielded, max.	30 m	30 m
Digital outputs
Number of digital outputs	4	8; 4 DO fixed, 4 DIO parameterizable
● in groups of		4; 2 load groups for 4 outputs each
Short-circuit protection	Yes; per channel, electronic	Yes; per channel, electronic
● Response threshold, typ.	0.7 A	0.7 A
Limitation of inductive shutdown voltage to	Typ. (2L+) -47 V	Typ. (L1+, L2+) -47 V
Controlling a digital input	Yes	Yes
Switching capacity of the outputs
● on lamp load, max.	5 W	5 W
Load resistance range
● lower limit	48 ?	48 ?
● upper limit	4 k?	4 k?
Output voltage
● for signal "1", min.		2L+ (-0,8 V)
Output current
● for signal "1" rated value	0.5 A	0.5 A
● for signal "0" residual current, max.	0.5 mA	0.5 mA
Parallel switching of two outputs
● for uprating	No	No
● for redundant control of a load	Yes	Yes
Switching frequency
● with resistive load, max.	100 Hz	100 Hz
● with inductive load, max.	0.5 Hz	0.5 Hz
● on lamp load, max.	1 Hz	1 Hz
Total current of the outputs (per group)
all mounting positions
— up to 55 °C, max.	2 A	2 A
Cable length
● shielded, max.	30 m	30 m
● unshielded, max.	30 m	30 m
Encoder
Connectable encoders
● 2-wire sensor	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA
Interrupts/diagnostics/status information
Diagnostic functions	Yes	Yes
Alarms
● Diagnostic alarm	Yes	Yes
Diagnostic messages
● Diagnostic information readable	Yes	Yes
● Short-circuit	Yes; Short-circuit of outputs to ground; module by module	Yes; Short-circuit of outputs to ground; module by module
Diagnostics indication LED
● Group error SF (red)		Yes
● Status indicator digital input (green)	Yes	Yes
● Status indicator digital output (green)	Yes	Yes
Potential separation
between backplane bus and all other circuit components	Yes	Yes
Potential separation digital inputs
● between the channels	No	No
● between the channels and backplane bus	Yes	Yes
Potential separation digital outputs
● between the channels	No
● between the channels and backplane bus	Yes	Yes
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety-oriented group deactivation		Yes
Highest safety class achievable in safety mode
● Performance level according to ISO 13849-1		d
● SIL acc. to IEC 61508		2
Dimensions
Width	45 mm	45 mm
Height	130 mm	130 mm
Depth	35 mm	35 mm
Weights
Weight, approx.	140 g	140 g