上海朔川電氣設備有限公司

免費會員

您現在的位置：上海朔川電氣設備有限公司>>智能控制PLC模塊>>西門子工業電器電源6EP>> 西門子6ES75121SK010AB0

西門子6ES75121SK010AB0

參考價:	面議

參考價:

面議

具體成交價以合同協議為準

產品型號
品牌
經銷商 廠商性質
上海市 所在地

訪問次數：191更新時間：2017-10-24 16:50:56

在線詢價加入對比查看聯系方式

聯系我們時請說明是智能制造網上看到的信息，謝謝!

分享

智能控制PLC模塊

上海朔川電氣設備有限公司

免費會員·9年

聯系人：: 吉夢琪

在線咨詢給我留言

掃一掃訪問手機商鋪

產品簡介

西門子6ES75121SK010AB0

產品介紹

西門子6ES75121SK010AB0 西門子6ES75121SK010AB0

6ES7512-1SK01-0AB0

SIMATIC DP,CPU 1512SP F-1 PN 用于 ET 200SP, *處理器 mit 工作存儲器 300 KB 用于程序和 1MByte 用于數據, 1. 接口:PROFINET IRT mit 3 Port 換機, 48 NS Bit-Performance, SIMATIC Memory 卡必要, 總線適配器必要用于 Port 1 和 2

公司名稱：上海朔川電氣設備有限公司

聯 系人：吉夢琪

：

地址：上海市金山區涇波路129號

：2840735331

信譽*，客戶*是公司成立之初所確立的宗旨，在公司的嚴格要求和員工們不折不扣地貫徹執行下發展延續至今。“假一罰十”一直是我公司的主動承諾。
承諾一：1、保證全新*

承諾二：2、保證安全準時發貨
承諾三：3、保證售后服務質量
流程一：1、客戶確認所需采購產品型號
流程二：2、我方會根據詢價單型號查詢價格以貨期，擬一份詳細正規報價單
流程三：3，客戶收到報價單并確認型號無誤后訂購產品
流程四：4、報價單負責人根據客戶提供型號以及數量擬份銷售合同
流程五：5、客戶收到合同查閱同意后蓋章回傳并按照合同銷售額匯款到公司開戶行
流程六：6、我公司財務查到款后，業務員安排發貨并通知客戶跟蹤運單

您隨口的一問多少錢，我就立馬放下筷子趕緊回話。

您隨口的一句有沒有現貨，我就立馬進去系統拼命地找。

您隨口問了問能優惠不？我就到處想辦法。

您很隨便，我卻很當真；您不知道我的回答，只為得到您的滿意..……

只因為我和您不止是客戶的關系，而是把您當我的朋友，在全力以赴做到我能做到的

您的選擇您的支持是我zui大的動力！ ————致我親愛的客戶（好朋友）

產品簡述：質保一年，一年內因產品質量問題免費更新產品不收取任何費用

哪里有賣要多少錢哪里有哪里能買到要在哪里買在哪里有賣的價格，參數，型號，哪家便宜，比較便宜，哪里有，銷售，訂貨號，多少錢？哪家價格好？廠家，性能，優點，包裝，用途，售后服務!哪里有賣代理商總代理商

1512SP F-1 PN

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

應用

設計

功能

技術規范

概述

SIMATIC ET 200SP 的 CPU 1512SP F-1 PN，基于 S7-1500 CPU 1513F-1 PN
適用于對程序范圍和處理速度具有中等要求的應用，通過 PROFINET IO 或 PROFIBUS DP 進行分布式配置。
提高了系統和設備的可用性
支持集中式和分布式配置中的 PROFIsafe
可連接zui多 128 個 IO 設備的 PROFINET IO 控制器
PROFINET I-Device，用于連接作為智能 PROFINET 設備的 CPU（帶 SIMATIC 或第三方 PROFINET I/O 控制器）
適用于 4 個控制器的 PROFINET 共享智能設備
PROFINET IO IRT 接口，帶集成 3 端換機
PROFIBUS 上的等時同步模式
具有多種通信方式：
PG/OP 通信、PROFINET IO 通信、開放式 IE 通信（TCP、ISO-on-TCP 和 UDP）、Web 服務器和 S7 通信（帶可裝載的函數塊）
可選 PROFIBUS 主站，用于 125 個 PROFIBUS DP 從站（帶 CM DP 模塊 6ES7545-5DA00-0AB0）
組態控制（選項處理）
集成運動控制功能，用于控制速度控制軸和定位軸，支持外部編碼器

注

CPU 的運行需要 SIMATIC 存儲卡

總線適配器不在供貨范圍內，須單獨訂購。

應用

CPU 1512SP F-1 PN 適用于分散生產技術中對處理性能和響應速度具有中等要求的標準應用和故障安全應用。CPU 1512SP F-1 PN 可以用作 PROFINET IO 控制器，也可以用作分布式智能設備（PROFINET 智能設備）。集成式 PROFINET IO IRT 接口的設計形式為 3 端換機，這樣就可以在系統中通過端口 1 和 2 建立總線型拓撲，并且也可通過端口 3 來連接編程設備/PC 或 HMI 設備。

作為智能設備使用時，CPU 1512SP F-1 PN 可實現在本地對過程數據進行分布式預處理，并且僅將實際需要的信息傳輸?shù)缴衔豢刂破?。這種方式有以下優點：

減輕*控制器的工作負荷
縮短對現場重要信號的響應時間
數據量減少，總線系統上的負荷降低
各單元經過預測試并進行平行調試，設置更快速
由于采用獨立的機器單元，提高了可用性和靈活性
組態清晰明了

CPU 1512SP F-1 PN *獨立于*控制器運行。如果發生故障，CPU 1512SP F-1 PN 仍繼續運行。

按位模塊化的 ET 200SP I/O 系統組態加上 CPU 1512SP F-1 PN，可實現面向功能的站組態。

另外，CPU 還通過易組態的塊提供全面控制功能，并能夠通過標準化 PLC-open 塊連接到驅動器。

設計

CPU 1512SP F-1 PN 可直接卡裝到標準安裝導軌上，并具有以下配置：

功能強大的處理器：
CPU 的命令執行時間可低至每個二進制指令 48 ns。
大容量工作存儲器：
300 KB 用于程序，1 MB 用于數據
SIMATIC 存儲卡作為裝載存儲器；
可具有固件更新、數據日志和歸檔等附加功能。
可按位進行模塊化擴展，靈活性高；
zui多達 64 個 I/O 模塊（I/O 模塊、工藝模塊和通信模塊），可任意組合。zui大 1 m 的站寬度。
PROFINET IO IRT 接口，帶 3 個集成換機端口：
- 端口 1 和 2 通過總線適配器來連接（CPU 1512SP F-1 PN 未提供總線適配器，不使用該適配器也可運行）。如果需要，需單獨訂購相應的總線適配器（BA 2xRJ45 或 BA 2xFC）。
- 端口 3 通過集成式 RJ45 接口來連接。
集成通信功能：
- 編程器/OP 通信
- PROFINET IO
- 開放式 IE 通信（TCP、ISO-on-TCP 和 UDP）
- Web 服務器
- S7 通信
- S7 路由
- 數據記錄路由
免維護數據備份（無需電池）
用于錯誤 (Error)、運行狀況 (RUN/Stop)、維護 (MT)、電源 (PWR) 診斷指示燈，以及每個端口一個鏈路 LED 指示燈
可選標簽采用淺灰色或黃色標簽條。有兩種材料可供選擇：
- 標簽箔和帶有 500 個標簽條的標簽卷，可用熱轉印打印機進行打印
- 紙 (280 g/m²)，規格 DIN A4，每張 100 個標簽條，適用于激光打印機
ET 200SP CPU 可配有一個參考 ID 標簽。
通過總線適配器實現不同 PROFINET 連接類型
- 在標準環境條件下，BA 2xRJ45 用于通過 RJ45 插頭進行連接
- 對于運行期間的機械負荷和/或更高的 EMC 要求，可使用 BA 2xFC 來直接連接 PROFINET 電纜
在將 AC I/O 模塊或 AI Energy Meter ST 用作*個 I/O 模塊時，應將深色基本單元用作 ET200SP CPU 后面的*個基本單元

供貨范圍

CPU 1512SP F-1 PN（包括服務器模塊）、24 V DC 連接器和總線適配器端口蓋（總線適配器須單獨訂購）

功能

性能
- 高速命令處理
- 高性能網絡接口：
  CPU 配有 PROFINET IO IRT（3 端換機）作為標準接口。
集成技術
- 通過標準化的塊 (PLCopen) 連接模擬驅動器和具有 PROFIdrive 功能的驅動器
- 支持轉速控制軸和定位軸以及外部編碼器
- 精確位置傳動可實現軸之間的同步操作
- 具有所有 CPU 變量的跟蹤功能，用于實時診斷和偶發故障檢測
- 全面的控制功能，例如，通過便于組態的塊自動優化控制參數以實現*控制質量
等時同步模式
- 通過恒定總線循環時間，將分布式信號采集、信號傳輸和程序執行與 PROFIBUS 循環進行同步耦合
集成安全功能
- 通過密碼保護專有技術，防止未經許可而讀取和修改程序塊
- 通過復制保護，可將具體程序塊與 SIMATIC 存儲卡的序列號綁定：
  只有在將配置的存儲卡插到 CPU 中后，程序塊才可運行。
- 4 級*方式：
  也可以對與 HMI 設備的通信進行限制。
- 防止操作：
  控制器可以識別工程組態數據的更改和未*傳輸。
集成式系統診斷
- 可在 TIA 博途中、HMI 設備上和 Web 服務器上顯示系統診斷信息，甚至可顯示來自變頻器的消息，及時 CPU 處于 STOP 模式也進行更新。
- 集成在 CPU 的固件中，無需進行特殊組態。
通過集中設置進行組態控制（選項處理）
- 可以在控制器存儲各種硬件組態：
  在用戶程序中修改組態（啟動 OB100）
  組態結束時改裝選件
  可使用占位模塊。
SIMATIC 存儲卡（CPU 運行需要此存儲卡）
- 用作插入式裝載存儲器，或用于更新固件
- 也用于存儲附加文檔或 .csv 文件（用于配方和歸檔）
- 通過用戶程序的系統函數創建數據塊以進行存儲/讀取
數據日志（歸檔）和配方
- 在 SIMATIC 存儲卡上存儲配方和歸檔的 .csv 文件；
  使用 Office 工具或通過 Web 服務器方便地訪問設備運行數據。
- 通過 Web 瀏覽器或 SD 讀卡器，方便地訪問機器組態數據（與控制器之間的雙向數據換）
對標準程序部分進行編程
- 使用 STEP 7 Professional V13 SP1 或更高版本進行編程
對故障安全程序部分進行編程
- 使用選件包“STEP 7 Safety Advanced”對安全相關程序部分進行編程

技術規范

Article number		6ES7512-1SK01-0AB0
		CPU 1512SP F-1 PN, 300KB PROG./1MB DATA
General information
Product type designation		CPU 1512SP F-1 PN
HW functional status		FS04
Firmware version		V2.0
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version		V14
Configuration control
via dataset		Yes
Control elements
Mode selector switch		1
Supply voltage
Type of supply voltage		24 V DC
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Mains buffering
● Mains/voltage failure stored energy time		5 ms
Input current
Current consumption (rated value)		0.6 A
Inrush current, max.		4.7 A; Rated value
I²t		0.14 A²·s
Power
Infeed power to the backplane bus		8.75 W
Power loss
Power loss, typ.		5.6 W
Memory
Number of slots for SIMATIC memory card		1
SIMATIC memory card required		Yes
Work memory
● integrated (for program)		300 kbyte
● integrated (for data)		1 Mbyte
Load memory
● Plug-in (SIMATIC Memory Card), max.		32 Gbyte
Backup
● maintenance-free		Yes
CPU processing times
for bit operations, typ.		48 ns
for word operations, typ.		58 ns
for fixed point arithmetic, typ.		77 ns
for floating point arithmetic, typ.		307 ns
CPU-blocks
Number of elements (total)		2 000; Blocks (OB, FB, FC, DB) and UDTs
DB
● Number range		1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999
● Size, max.		1 Mbyte; For DBs with absolute addressing, the max. size is 64 KB
FB
● Number range		0 ... 65 535
● Size, max.		200 kbyte
FC
● Number range		0 ... 65 535
● Size, max.		200 kbyte
OB
● Size, max.		200 kbyte
● Number of free cycle OBs		100
● Number of time alarm OBs		20
● Number of delay alarm OBs		20
● Number of cyclic interrupt OBs		20; With Failsafe, two RTGs with one "Cyclic interrupt OB" or one "Free cycle OB" (F-OB) each are possible
● Number of process alarm OBs		50
● Number of DPV1 alarm OBs		3
● Number of isochronous mode OBs		1
● Number of technology synchronous alarm OBs		2
● Number of startup OBs		100
● Number of asynchronous error OBs		4
● Number of synchronous error OBs		2
● Number of diagnostic alarm OBs		1
Nesting depth
● per priority class		24; Up to 8 possible for F-blocks
Counters, timers and their retentivity
S7 counter
● Number		2 048
Retentivity
— adjustable		Yes
IEC counter
● Number		Any (only limited by the main memory)
Retentivity
— adjustable		Yes
S7 times
● Number		2 048
Retentivity
— adjustable		Yes
IEC timer
● Number		Any (only limited by the main memory)
Retentivity
— adjustable		Yes
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.		128 kbyte; Available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB
Flag
● Number, max.		16 kbyte
● Number of clock memories		8; 8 clock memory bits, grouped into one clock memory byte
Data blocks
● Retentivity adjustable		Yes
● Retentivity preset		No
Local data
● per priority class, max.		64 kbyte; max. 16 KB per block
Address area
Number of IO modules		2 048; max. number of modules / submodules
I/O address area
● Inputs		32 kbyte; All inputs are in the process image
● Outputs		32 kbyte; All outputs are in the process image
per integrated IO subsystem
— Inputs (volume)		8 kbyte
— Outputs (volume)		8 kbyte
per CM/CP
— Inputs (volume)		8 kbyte
— Outputs (volume)		8 kbyte
Subprocess images
● Number of subprocess images, max.		32
Address space per module
● Address space per module, max.		288 byte; For input and output data respectively
Address space per station
● Address space per station, max.		2 560 byte; for central inputs and outputs; depending on configuration; 2 048 bytes for ET 200SP modules + 512 bytes for ET 200AL modules
Hardware configuration
Number of distributed IO systems		32; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link)
Number of DP masters
● Via CM		1
Number of IO Controllers
● integrated		1
● Via CM		0
Rack
● Modules per rack, max.		80; CPU + 64 modules + server module (mounting width max. 1 m) + 16 ET 200AL modules
● Number of lines, max.		1
PtP CM
● Number of PtP CMs		the number of connectable PtP CMs is only limited by the number of available slots
Time of day
Clock
● Type		Hardware clock
● Backup time		6 wk; At 40 °C ambient temperature, typically
● Deviation per day, max.		10 s; Typ.: 2 s
Operating hours counter
● Number		16
Clock synchronization
● supported		Yes
● to DP, master		Yes; Via CM DP module
● to DP, slave		Yes; Via CM DP module
● in AS, master		Yes
● in AS, slave		Yes
● on Ethernet via NTP		Yes
Interfaces
Number of PROFINET interfaces		1
Number of PROFIBUS interfaces		1; Via CM DP module
With optical interface		Yes; Via BusAdapter BA 2x SCRJ
1. Interface
Interface types
● Number of ports		3; 1. integr. + 2. via BusAdapter
● integrated switch		Yes
● RJ 45 (Ethernet)		Yes; X1 P3; opt. X1 P1 and X1 P2 via BusAdapter BA 2x RJ45
● BusAdapter (PROFINET)		Yes; Applicable BusAdapter: BA 2x RJ45, BA 2x FC, BA 2x SCRJ, BA SCRJ / RJ45, BA SCRJ / FC
Functionality
● PROFINET IO Controller		Yes
● PROFINET IO Device		Yes
● SIMATIC communication		Yes
● Open IE communication		Yes
● Web server		Yes
● Media redundancy		Yes
PROFINET IO Controller
Services
— PG/OP communication		Yes
— S7 routing		Yes
— Isochronous mode		Yes
— Open IE communication		Yes
— IRT		Yes
— MRP		Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50
— MRPD		Requirement: IRT
— PROFIenergy		Yes
— Prioritized startup		Yes; Max. 32 PROFINET devices
— Number of connectable IO Devices, max.		128; In total, up to 512 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
— Of which IO devices with IRT, max.		64
— Number of connectable IO Devices for RT, max.		128
— of which in line, max.		128
— Number of IO Devices that can be simultaneously activated/deactivated, max.		8; in total across all interfaces
— Number of IO Devices per tool, max.		8
— Updating times		The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
Update time for IRT
— for send cycle of 250 µs		250 μs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 500 µs of the isochronous OB is decisive
— for send cycle of 500 µs		500 µs to 8 ms
— for send cycle of 1 ms		1 ms to 16 ms
— for send cycle of 2 ms		2 ms to 32 ms
— for send cycle of 4 ms		4 ms to 64 ms
— With IRT and parameterization of "odd" send cycles		Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs)
Update time for RT
— for send cycle of 250 µs		250 µs to 128 ms
— for send cycle of 500 µs		500 µs to 256 ms
— for send cycle of 1 ms		1 ms to 512 ms
— for send cycle of 2 ms		2 ms to 512 ms
— for send cycle of 4 ms		4 ms to 512 ms
PROFINET IO Device
Services
— PG/OP communication		Yes
— S7 routing		Yes
— Isochronous mode		No
— Open IE communication		Yes
— IRT		Yes
— MRP		Yes
— MRPD		Yes; Requirement: IRT
— PROFIenergy		Yes
— Shared device		Yes
— Number of IO Controllers with shared device, max.		4
2. Interface
Interface types
● Number of ports		1
● RS 485		Yes; Via CM DP module
Functionality
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		Yes
● SIMATIC communication		Yes
Interface types
RJ 45 (Ethernet)
● 100 Mbps		Yes
● Autonegotiation		Yes
● Autocrossing		Yes
● Industrial Ethernet status LED		Yes
RS 485
● Transmission rate, max.		12 Mbit/s
Protocols
Number of connections
● Number of connections, max.		128
● Number of connections reserved for ES/HMI/web		10
● Number of connections via integrated interfaces		88
● Number of connections per CP/CM		32
● Number of S7 routing paths		16
SIMATIC communication
● S7 communication, as server		Yes
● S7 communication, as client		Yes
● User data per job, max.		See online help (S7 communication, user data size)
Open IE communication
● TCP/IP		Yes
— Data length, max.		64 kbyte
— several passive connections per port, supported		Yes
● ISO-on-TCP (RFC1006)		Yes
— Data length, max.		64 kbyte
● UDP		Yes
— Data length, max.		1 472 byte
— UDP multicast		Yes; Max. 5 multicast circuits
● DHCP		No
● SNMP		Yes
● DCP		Yes
● LLDP		Yes
Web server
● HTTP		Yes; Standard and user-defined pages
● HTTPS		Yes; Standard and user-defined pages
PROFIBUS DP master
● Number of connections, max.		48
Services
— PG/OP communication		Yes
— S7 routing		Yes
— Data record routing		Yes
— Isochronous mode		No
— Equidistance		No
— Number of DP slaves		125; In total, up to 512 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
— Activation/deactivation of DP slaves		Yes
Further protocols
● MODBUS		Yes; MODBUS TCP
Media redundancy
● Switchover time on line break, typ.		200 ms; For MRP, bumpless for MRPD
● Number of stations in the ring, max.		50
Isochronous mode
Isochronous operation (application synchronized up to terminal)		Yes; Only with PROFINET; with minimum OB 6x cycle of 625 µs
S7 message functions
Number of login stations for message functions, max.		32
Program alarms		Yes
Number of configurable program alarms		5 000
Number of simultaneously active program alarms
● Number of program alarms		300
● Number of alarms for system diagnostics		100
● Number of alarms for motion technology objects		80
Test commissioning functions
Joint commission (Team Engineering)		Yes; Parallel online access possible for up to 3 engineering systems
Status block		Yes; Up to 8 simultaneously (in total across all ES clients)
Single step		No
Status/control
● Status/control variable		Yes
● Variables		Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
● Number of variables, max.
— of which status variables, max.		200; per job
— of which control variables, max.		200; per job
Forcing
● Forcing		Yes
● Forcing, variables		Peripheral inputs/outputs
● Number of variables, max.		200
Diagnostic buffer
● present		Yes
● Number of entries, max.		1 000
— of which powerfail-proof		500
Traces
● Number of configurable Traces		4; Up to 512 KB of data per trace are possible
Interrupts/diagnostics/status information
Diagnostics indication LED
● RUN/STOP LED		Yes
● ERROR LED		Yes
● MAINT LED		Yes
● Monitoring of the supply voltage (PWR-LED)		Yes
● Connection display LINK TX/RX		Yes
Supported technology objects
Motion Control		Yes; Note: The number of technology objects affects the cycle time of the PLC program; selection guide via the TIA Selection Tool or SIZER
● Number of available Motion Control resources for technology objects (except cam disks)		800
● Required Motion Control resources
— per speed-controlled axis		80
— per positioning axis		160
— per synchronous axis		160
— per external encoder		80
— per output cam		20
— per cam track		160
— per probe		40
● Positioning axis
— Number of positioning axes at motion control cycle of 4 ms (typical value)		3; At 40% CPU load due to Motion Control
— Number of positioning axes at motion control cycle of 8 ms (typical value)		8; At 40% CPU load due to Motion Control
Controller
● PID_Compact		Yes; Universal PID controller with integrated optimization
● PID_3Step		Yes; PID controller with integrated optimization for valves
● PID-Temp		Yes; PID controller with integrated optimization for temperature
Counting and measuring
● High-speed counter		Yes
Highest safety class achievable in safety mode
Probability of failure (for service life of 20 years and repair time of 100 hours)
— Low demand mode: PFDavg in accordance with SIL3		< 2.00E-05
— High demand/continuous mode: PFH in accordance with SIL3		< 1.00E-09
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.		0 °C
● horizontal installation, max.		60 °C
● vertical installation, min.		0 °C
● vertical installation, max.		50 °C
Ambient temperature during storage/transportation
● min.		-40 °C
● max.		70 °C
Configuration
Programming
Programming language
— LAD		Yes; incl. failsafe
— FBD		Yes; incl. failsafe
— STL		Yes
— SCL		Yes
— GRAPH		Yes
Know-how protection
● User program protection/password protection		Yes
● Copy protection		Yes
● Block protection		Yes
Access protection
● Protection level: Write protection		Yes
● Protection level: Read/write protection		Yes
● Protection level: Complete protection		Yes
Cycle time monitoring
● lower limit		adjustable minimum cycle time
● upper limit		adjustable maximum cycle time
Dimensions
Width		100 mm
Height		117 mm
Depth		75 mm
Weights
Weight, approx.		310 g