上海朔川電氣設備有限公司

免費會員·9年

您現在的位置：上海朔川電氣設備有限公司>>西門子S7-1500>> 西門子6ES75211BL000AB0數字模塊

西門子6ES75211BL000AB0數字模塊

參考價:	面議

參考價:

面議

具體成交價以合同協議為準

產品型號
品牌
經銷商 廠商性質
上海市 所在地

訪問次數：661更新時間：2017-10-20 20:39:09

在線詢價 加入對比查看聯系方式

聯系我們時請說明是智能制造網上看到的信息，謝謝!

分享

西門子S7-1500

上海朔川電氣設備有限公司

免費會員·9年

聯系人：: 吉夢琪

在線咨詢給我留言

掃一掃訪問手機商鋪

產品簡介

西門子6ES75211BL000AB0數字模塊

產品介紹

西門子6ES75211BL000AB0數字模塊西門子6ES75211BL000AB0數字模塊

6ES7521-1BL00-0AB0

SIMATIC S7-1500, 數字量輸入模塊 DI 32xDC 24V, 32 通道在組件中 16; 輸入延遲 0.05..20ms 輸入類型 3(IEC 61131); 診斷;Prozessalarme

· 公司名稱：上海朔川電氣設備有限公司

· 聯 系人：吉夢琪

· 手機；

· ：

· 地址：上海市金山區涇波路680號

· ：2840735331

SM 521 數字量輸入模塊

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

應用

設計

功能

技術規范

概述

16 和 32 通道數字量輸入模塊
靈活地選擇控制器以滿足相應任務需要
用于使用附加輸入對系統進行后續擴展
35 mm 寬的模塊具有參數設置和診斷功能
25 mm 寬的模塊可在狹小空間內使用：
極為經濟，無參數設置或診斷功能

應用

數字量輸入模塊可記錄設備中的 24 V DC 或 230 V AC 信號，并將它們傳送到控制器。可以連接開關以及 2 線制、3 線制或 4 線制接近開關。

35 mm 寬的輸入模塊具有可設定的參數和診斷功能，因此可根據相應過程要求進行靈活調整。

25 mm 寬的低成本模塊沒有可設定的參數或診斷功能，可極為方便地集成到工程系統中。建議將它們在只需要很少輸入通道的位置使用，或在必須在十分有限的空間內部署大量通道的情況下使用。

根據需要，可在一個站中并排使用兩種模塊。由于具有統一特性并采用共同的系統附件，處理十分方便。

提供了以下寬度為 35 mm 的數字量輸入模塊：

DI 16x24VDC HF；
16 通道數字量輸入模塊，用于記錄 24 V DC 信號；一個電壓組；輸入延遲 0.05 ... 20 ms；輸入類型 3 (IEC 61131)；可設置診斷和硬件中斷
DI 32x24VDC HF;
32 通道數字量輸入模塊，用于記錄 24 V DC 信號；兩個電壓組；輸入延遲 0.05 ... 20 ms；輸入類型 3 (IEC 61131)；可設置診斷和硬件中斷
DI 16x24VDC SRC BA;
16 通道數字量輸入模塊，用于記錄 24 V DC 信號；低電平有效；一個電壓組；固定輸入延遲 3.2 ms；輸入類型 3 (IEC 61131)
DI 16x230VAC BA;
16 通道數字量輸入模塊，用于記錄 230 V DC 信號；低電平有效；一個電壓組；固定輸入延遲 20 ms；輸入類型 1 (IEC 61131)

提供了以下寬度為 25 mm 的數字量輸入模塊：

DI 16x24VDC BA;
16 通道數字量輸入模塊，用于記錄 24 V DC 信號；漏型輸入；一個電壓組；固定輸入延遲 3.2 ms；輸入類型 3 (IEC 61131)
DI 32x24VDC BA;
32 通道數字量輸入模塊，用于記錄 24 V DC 信號；漏型輸入；一個電壓組；固定輸入延遲 3.2 ms；輸入類型 3 (IEC 61131)

設計

用一個螺絲安裝在 S7-1500 安裝導軌上
35 mm 模塊采用螺釘型端子或推入式端子的標準化 40 針前連接器（不能用于 25 mm 模塊）
25 mm 模塊采用推入式端子的標準化 40 針前連接器（不能用于 35 mm 模塊）
標準化、協調型前連接器針腳分配，更便于接線
可連接芯線截面積0.25 mm² 至 1.5 mm²（AWG24 至 16）
集成式電壓橋接件，用于靈活形成電壓組(僅 35 mm 模塊)
前連接器的預接線位置
前蓋帶有可擴充的電纜室，即使*接線時也如此
模塊正面的清晰標簽
- 模塊類型
- 訂貨號
- 硬件和固件型號
- 通道編號標簽
- 電纜連接圖

含在供貨范圍之內：

用于手工貼標簽的一個標簽條
一個 U 型連接器
印制有文字的前門
前連接器（(僅 25 mm 模塊）

功能

統一的顯示和診斷方式：
- 故障（紅色 LED）和運行（綠色 LED）模塊狀態顯示
- 用于信號狀態日志的信號狀態顯示。"0" 和日志。 "1"（綠色 LED），或者，指示線斷（紅色 LED）
- 顯示 24 V DC 電源電壓（綠色 LED）
支持的功能：
- 識別和維護數據 IM0 至 IM3
- 固件更新
- 模塊級別的共享設備和 MSI（模塊化共享輸入）；
  與 PROFINET 結合使用時，可將這些模塊分配給多個 IO 控制器
- 與通道有關的參數分配（* HF 模塊）
- 硬件中斷（* HF 模塊）
- 按通道進行診斷（* HF 模塊）
- 等時同步模式（取決于模塊）

技術規范

Article number	6ES7521-1BH00-0AB0	6ES7521-1BL00-0AB0	6ES7521-1BH50-0AA0	6ES7521-1FH00-0AA0	6ES7521-7EH00-0AB0
	S7-1500, DI 16X24VDC HF	S7-1500, DI 32X24VDC HF	S7-1500, DI 16X24VDC SRC BA	S7-1500, DI 16X230VAC BA	S7-1500, DI 16 X 24...125V UC HF
General information
Product type designation	DI 16x24VDC HF	DI 32x24VDC HF	DI 16x24VDC SRC BA	DI 16x230VAC BA
HW functional status	FS01	FS01	FS01	FS01	FS01
Firmware version	V2.1.0	V2.1.0	V2.0.0	V2.0.0	V1.0.0
● FW update possible	Yes	Yes	Yes	Yes	Yes
Product function
● I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version	V13 SP1 / -	V13 SP1 / -	V12 / V12	V12 / V12	V13 SP1 / -
● STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -	V5.5 SP3 / -
● PROFIBUS as of GSD version/GSD revision	V1.0 / V5.1	V1.0 / V5.1	V1.0 / V5.1	V1.0 / V5.1	V1.0 / V5.1
● PROFINET as of GSD version/GSD revision	V2.3 / -	V2.3 / -	V2.3 / -	V2.3 / -	V2.3 / -
Operating mode
● DI	Yes	Yes	Yes	Yes	Yes
● Counter	Yes	Yes	No	No	No
● Oversampling	No	No			No
● MSI	Yes	Yes	Yes	Yes	Yes
Supply voltage
Rated value (DC)	24 V	24 V
permissible range, lower limit (DC)	20.4 V	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes
Input current
Current consumption, max.	20 mA; with 24 V DC supply	40 mA; 20 mA per group with 24 V DC supply
Power
Power available from the backplane bus	1.1 W	1.1 W	0.9 W	1 W	1.2 W
Power loss
Power loss, typ.	2.6 W	4.2 W	2.8 W	4.9 W	2.2 W; At 24 V DC; 6.0 W at 125 V AC
Digital inputs
Number of digital inputs	16	32	16	16	16
Digital inputs, parameterizable	Yes	Yes	No	No	Yes
Source/sink input	P-reading	P-reading	m-reading	P-reading	Yes
Input characteristic curve in accordance with IEC 61131, type 1				Yes
Input characteristic curve in accordance with IEC 61131, type 3	Yes	Yes	Yes		Yes; at 24 V DC
Digital input functions, parameterizable
● Gate start/stop	Yes	Yes
● Freely usable digital input	Yes	Yes
● Counter
— Number, max.	2	2
— Counting frequency, max.	1 kHz	1 kHz
— Counting width	32 bit	32 bit
— Counting direction up/down	Up	Up
Input voltage
● Type of input voltage	DC	DC	DC	AC	AC/DC
● Rated value (DC)	24 V	24 V	24 V		24 V; 48 V, 125 V
● Rated value (AC)				230 V; 120/230V AC, 50/60 Hz	24 V; 48 V, 125 V (50 - 60 Hz)
● for signal "0"	-30 to +5V	-30 to +5V	-5 to +30V	0V AC to 40V AC	-5 ... +5 V
● for signal "1"	+11 to +30V	+11 to +30V	-11 to -30V	79V AC to 264V AC	+11 ... +146 V
Input current
● for signal "1", typ.	2.5 mA	2.5 mA	4.5 mA	11 mA; At 230 V AC and 5.5 mA at 120 V AC	3 mA; at 24 V DC
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable	Yes; 0.05 / 0.1 / 0.4 / 1.6 / 3.2 / 12.8 / 20 ms	Yes; 0.05 / 0.1 / 0.4 / 1.6 / 3.2 / 12.8 / 20 ms	No	No	Yes; 0.05 / 0.1 / 0.4 / 1.6 / 3.2 / 12.8 / 20 ms parameterizable with DC, 20 ms fixed with AC
— at "0" to "1", min.	0.05 ms	0.05 ms	3 ms		0.05 ms
— at "0" to "1", max.	20 ms	20 ms	4 ms	25 ms	20 ms
— at "1" to "0", min.	0.05 ms	0.05 ms	3 ms		0.05 ms
— at "1" to "0", max.	20 ms	20 ms	4 ms	25 ms	20 ms
for interrupt inputs
— parameterizable	Yes	Yes	No	No	Yes
for counter/technological functions
— parameterizable	Yes	Yes	No	No	No
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m
● unshielded, max.	600 m	600 m	600 m	600 m	600 m
Encoder
Connectable encoders
● 2-wire sensor	Yes	Yes	Yes	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA	1.5 mA	2 mA	1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes	No	No	No
Filtering and processing time (TCI), min.	80 µs; At 50 μs filter time	80 µs; At 50 μs filter time
Bus cycle time (TDP), min.	250 µs	250 µs
Interrupts/diagnostics/status information
Diagnostics function	Yes	Yes	No	No	Yes
Alarms
● Diagnostic alarm	Yes	Yes	No	No	Yes
● Hardware interrupt	Yes	Yes	No	No	Yes
Diagnostic messages
● Monitoring the supply voltage	Yes	Yes	No	No	No
● Wire-break	Yes; to I < 350 µA	Yes; to I < 350 µA	No	No	Yes; To I < 550 µA
● Short-circuit	No	No	No	No	No
Diagnostics indication LED
● RUN LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
● ERROR LED	Yes; Red LED	Yes; Red LED	Yes; Red LED	Yes; Red LED	Yes; Red LED
● Monitoring of the supply voltage (PWR-LED)	Yes; Green LED	Yes; Green LED	No	No	No
● Channel status display	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED	Yes; Green LED
● for channel diagnostics	Yes; Red LED	Yes; Red LED	No	No	Yes; Red LED
● for module diagnostics	Yes; Red LED	Yes; Red LED	No	Yes; Red LED	Yes; Red LED
Potential separation
Potential separation channels
● between the channels	No	Yes	No	No	Yes
● between the channels, in groups of	16	16	16	4	1
● between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes
● between the channels and the power supply of the electronics	No	No
Permissible potential difference
between different circuits				250 V AC between the channels and the backplane bus; 500 V AC between the channels	146 V DC/132 V AC
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)	3 100 V DC	2 000 V DC
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	0 °C	0 °C	0 °C	0 °C	0 °C
● horizontal installation, max.	60 °C	60 °C	60 °C	60 °C	60 °C
● vertical installation, min.	0 °C	0 °C	0 °C	0 °C	0 °C
● vertical installation, max.	40 °C	40 °C	40 °C	40 °C	40 °C
Decentralized operation
Prioritized startup	Yes	Yes	Yes	Yes	Yes
Dimensions
Width	35 mm	35 mm	35 mm	35 mm	35 mm
Height	147 mm	147 mm	147 mm	147 mm	147 mm
Depth	129 mm	129 mm	129 mm	129 mm	129 mm
Weights
Weight, approx.	240 g	260 g	230 g	300 g	240 g

Article number	6ES7521-1BH10-0AA0	6ES7521-1BL10-0AA0
	S7-1500, DI 16X24VDC BA	S7-1500, DI 32X24VDC BA
General information
Product type designation	DI 16 x 24 V DC BA	DI 32x24VDC BA
HW functional status	FS01	FS01
Firmware version	V1.0.0	V1.0.0
● FW update possible	Yes	Yes
Product function
● I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated as of version	V13 / V13	V13 / V13
● STEP 7 configurable/integrated as of version	V5.5 SP3 / -	V5.5 SP3 / -
● PROFIBUS as of GSD version/GSD revision	V1.0 / V5.1	V1.0 / V5.1
● PROFINET as of GSD version/GSD revision	V2.3 / -	V2.3 / -
Operating mode
● DI	Yes	Yes
● Counter	No	No
● MSI	Yes	Yes
Supply voltage
Rated value (DC)	24 V	24 V
permissible range, lower limit (DC)	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V
Power
Power available from the backplane bus	1.05 W	1.05 W
Power loss
Power loss, typ.	1.8 W	3 W
Digital inputs
Number of digital inputs	16	32
Digital inputs, parameterizable	No	No
Source/sink input	P-reading	P-reading
Input characteristic curve in accordance with IEC 61131, type 3	Yes	Yes
Input voltage
● Type of input voltage	DC	DC
● Rated value (DC)	24 V	24 V
● for signal "0"	-30 to +5V	-30 to +5V
● for signal "1"	+11 to +30V	+11 to +30V
Input current
● for signal "1", typ.	2.7 mA	2.7 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable	No	No
— at "0" to "1", min.	3 ms	3 ms
— at "0" to "1", max.	4 ms	4 ms
— at "1" to "0", min.	3 ms	3 ms
— at "1" to "0", max.	4 ms	4 ms
for interrupt inputs
— parameterizable	No	No
for counter/technological functions
— parameterizable	No	No
Cable length
● shielded, max.	1 000 m	1 000 m
● unshielded, max.	600 m	600 m
Encoder
Connectable encoders
● 2-wire sensor	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	No	No
Interrupts/diagnostics/status information
Diagnostics function	No	No
Alarms
● Diagnostic alarm	No	No
● Hardware interrupt	No	No
Diagnostic messages
● Monitoring the supply voltage	No	No
● Wire-break	No	No
● Short-circuit	No	No
Diagnostics indication LED
● RUN LED	Yes; Green LED	Yes; Green LED
● ERROR LED	Yes; Red LED	Yes; Red LED
● Monitoring of the supply voltage (PWR-LED)	No	No
● Channel status display	Yes; Green LED	Yes; Green LED
● for channel diagnostics	No	No
● for module diagnostics	No	No
Potential separation
Potential separation channels
● between the channels	No	No
● between the channels, in groups of	16	16
● between the channels and backplane bus	Yes	Yes
● between the channels and the power supply of the electronics		No
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	0 °C	0 °C
● horizontal installation, max.	60 °C	60 °C
● vertical installation, min.	0 °C	0 °C
● vertical installation, max.	40 °C	40 °C
Decentralized operation
Prioritized startup	Yes	Yes
Dimensions
Width	25 mm	25 mm
Height	147 mm	147 mm
Depth	129 mm	129 mm
Weights
Weight, approx.	230 g	260 g
Other
Note:	Supplied incl. 40-pole push-in front connectors	Supplied incl. 40-pole push-in front connectors