上海朔川電氣設備有限公司

免費會員

您現在的位置：上海朔川電氣設備有限公司>>西門子S7-1500>> 西門子6EP1333-4BA00

西門子6EP1333-4BA00

參考價:	面議

參考價:

面議

具體成交價以合同協議為準

產品型號
品牌
經銷商 廠商性質
上海市 所在地

訪問次數：266更新時間：2017-10-20 19:54:14

在線詢價加入對比查看聯系方式

聯系我們時請說明是智能制造網上看到的信息，謝謝!

分享

西門子S7-1500

上海朔川電氣設備有限公司

免費會員·9年

聯系人：: 吉夢琪

在線咨詢給我留言

掃一掃訪問手機商鋪

產品簡介

西門子6EP1333-4BA00

產品介紹

西門子6EP1333-4BA00 西門子6EP1333-4BA00

6EP1333-4BA00

SIMATIC PM 1507 24 V/8 A 調節電源用于 SIMATIC S7-1500 輸入：AC 120/230 V 輸出：DC 24 V/8 A

· 公司名稱：上海朔川電氣設備有限公司

· 聯 系人：吉夢琪

· 手機；

· ：

· 地址：上海市金山區涇波路680號

· ：2840735331

負載電源

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

設計

功能

技術規范

附件

概述

SIMATIC PM 1507 單相負載電源（PM = 電源模塊）具有輸入電壓范圍自動選擇功能。其設計和功能非常適用于 SIMATIC S7-1500 PLC。它為 S7-1500 系統組件（例如，CPU、系統電源（PS）、輸入和輸出模塊的 I/O 電路等）供電；必須時，也可以向傳感器和執行器提供 24 VDC 電源。

設計

這些負載電源可直接固定到 S7-1500 安裝導軌上（不連接到背板總線），并可直接安裝到 CPU 的左側（無需留出安裝間隙）
狀態和故障診斷顯示 LED：運行、故障、待機
更換模塊時使用的 ON/OFF 開關（運行/待機）
電源連接插頭帶防觸摸保護，通過電纜松緊件來連接輸入電纜（可進行固定接線）
插入式 24 V DC 輸出端子帶極性反接保護，用于連接 24 V 負載（可進行固定接線）

功能

通過自動范圍切換，連接至所有 50/60 Hz (120 / 230 V AC) 單相電網
短時間電源緩沖
輸出 24 V DC 電壓，zui高限制在 28 V DC（防止過高的電壓對 24 V 負載造成損壞）
針對短時間過載，每分鐘有 5 秒可有 50% 的“額外功率”，例如在切換 24V 用電設備時
可并聯兩個負載電源以提高性能

技術規范

Article number	6EP1332-4BA00	6EP1333-4BA00
Product	S7-1500 PM1507	S7-1500 PM1507
Power supply, type	24 V/3 A	24 V/8 A
Input
Input	1-phase AC	1-phase AC
Supply voltage
● 1 at AC Rated value	120 V	120 V
● 2 at AC Rated value	230 V	230 V
● Note	Automatic range selection	Automatic range selection
Input voltage
● 1 at AC	85 ... 132 V	85 ... 132 V
● 2 at AC	170 ... 264 V	170 ... 264 V
Wide-range input	No	No
Overvoltage resistance	2.3 × Vin rated, 1.3 ms	2.3 × Vin rated, 1.3 ms
Mains buffering at Iout rated, min.	20 ms; at Vin = 93/187 V	20 ms; at Vin = 93/187 V
Rated line frequency 1	50 Hz	50 Hz
Rated line frequency 2	60 Hz	60 Hz
Rated line range	45 ... 65 Hz	45 ... 65 Hz
Input current
● at rated input voltage 120 V	1.4 A	3.7 A
● at rated input voltage 230 V	0.8 A	1.7 A
Switch-on current limiting (+25 °C), max.	23 A	62 A
Duration of inrush current limiting at 25 °C
● maximum	3 ms	3 ms
I²t, max.	1.3 A²·s	12 A²·s
Built-in incoming fuse	T 3,15 A/250 V (not accessible)	T 6.3 A/250 V (not accessible)
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker: 10 A characteristic B or 6 A characteristic C	Recommended miniature circuit breaker: 16 A characteristic B or 10 A characteristic C
Output
Output	Controlled, isolated DC voltage	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V	24 V
Total tolerance, static ±	1 %	1 %
Static mains compensation, approx.	0.1 %	0.1 %
Static load balancing, approx.	0.1 %	0.1 %
Residual ripple peak-peak, max.	50 mV	50 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	150 mV	150 mV
Product function Output voltage adjustable	No	No
Status display	LED green for 24 V OK; LED red for error; LED yellow for stand-by	LED green for 24 V OK; LED red for error; LED yellow for stand-by
On/off behavior	No overshoot of Vout (soft start)	No overshoot of Vout (soft start)
Startup delay, max.	1.5 s	1.5 s
Voltage rise, typ.	10 ms	10 ms
Rated current value Iout rated	3 A	8 A
Current range	0 ... 3 A	0 ... 8 A
Supplied active power typical	72 W	192 W
Short-term overload current
● on short-circuiting during the start-up typical	12 A	35 A
● at short-circuit during operation typical	12 A	35 A
Duration of overloading capability for excess current
● on short-circuiting during the start-up	70 ms	70 ms
● at short-circuit during operation	70 ms	70 ms
Parallel switching for enhanced performance	No	No
Efficiency
Efficiency at Vout rated, Iout rated, approx.	87 %	90 %
Power loss at Vout rated, Iout rated, approx.	11 W	21 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.1 %	0.1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	1 %	2 %
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.	3 %	3 %
Load step setting time 10 to 90%, typ.	5 ms	5 ms
Load step setting time 90 to 10%, typ.	5 ms	5 ms
Setting time maximum	5 ms	5 ms
Protection and monitoring
Output overvoltage protection	Additional control loop, limitation (closed loop control) at < 28.8 V	Additional control loop, limitation (closed loop control) at < 28.8 V
Current limitation	3.15 ... 3.6 A	8.4 ... 9.6 A
Current limitation, typ.	3.4 A	9 A
Property of the output Short-circuit proof	Yes	Yes
Short-circuit protection	Electronic shutdown, automatic restart	Electronic shutdown, automatic restart
Overload/short-circuit indicator	-	-
Safety
Primary/secondary isolation	Yes	Yes
Galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 and EN 61131-2	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 and EN 61131-2
Protection class	Class I	Class I
Leakage current
● maximum	3.5 mA	3.5 mA
● typical	0.4 mA	1.3 mA
CE mark	Yes	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289	cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289
Explosion protection	IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cULus (ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T4, File E330455	IECEx Ex nA nC IIC T3 Gc; ATEX (EX) II 3G Ex nA nC IIC T3 Gc; cULus (ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T3, File E330455
FM approval	Class I, Div. 2, Group ABCD, T4	Class I, Div. 2, Group ABCD, T4
CB approval	Yes	Yes
Marine approval	GL, ABS, BV, DNV	GL, ABS, BV, DNV
Degree of protection (EN 60529)	IP20	IP20
EMC
Emitted interference	EN 55022 Class B	EN 55022 Class B
Supply harmonics limitation	EN 61000-3-2	EN 61000-3-2
Noise immunity	EN 61000-6-2	EN 61000-6-2
Operating data
Ambient temperature
● during operation	0 ... 60 °C	0 ... 60 °C
— Note	with natural convection	with natural convection
● during transport	-40 ... +85 °C	-40 ... +85 °C
● during storage	-40 ... +85 °C	-40 ... +85 °C
Humidity class according to EN 60721	Climate class 3K3, no condensation	Climate class 3K3, no condensation
Mechanics
Connection technology	Screw-/spring clamp connection	Screw-/spring clamp connection
Connections
● Supply input	L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm²	L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm²
● Output	L+, M: 2 spring-loaded terminals each for 0.5 to 2.5 mm²	L+, M: 2 spring-loaded terminals each for 0.5 to 2.5 mm²
Product function
● removable terminal at input	Yes	Yes
● removable terminal at output	Yes	Yes
Width of the enclosure	50 mm	75 mm
Height of the enclosure	147 mm	147 mm
Depth of the enclosure	129 mm	129 mm
Required spacing
● top	50 mm
● bottom	50 mm
● left	0 mm
● right	0 mm
Weight, approx.	0.45 kg	0.74 kg
Product feature of the enclosure housing for side-by-side mounting	Yes	Yes
Installation	Can be mounted onto S7-1500 rail	Can be mounted onto S7-1500 rail
MTBF at 40 °C	1 611 993 h	1 362 918 h
Other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)