西門子6ES71555BA000AB0型號及參數 西門子6ES71555BA000AB0型號及參數 

6ES7155-5BA00-0AB0 SIMATIC ET 200MP. PROFIBUS 接通 IM 155-5 DP ST 用于 max. 12 S7-1500 Baugruppen

公司名稱：上海朔川電氣設備有限公司

• 聯 系 人：吉夢琪
• ：
• 地址：上海市金山區涇波路129號
• ：2840735331

• IM 155-5 DP 訂貨數據   附件   產品信息   組態工具 跳轉到 概述 應用 設計 技術規范 概述 用于將 ET 200MP 連接到 PROFIBUS 的接口模塊 在 PLC 中處理與 PROFIBUS 主站的數據交換 zui多 12 個 I/O 模塊 自動檢測通信速率 9.6 kbps ...12 MBd PROFIBUS 地址 1 ...125；可使用 DIP 開關進行調節 識別和維護數據 IM0 ...IM3 應用 使用 IM 155-5 DP ST 接口模塊，可將 ET 200MP 連接至 PROFIBUS，并自動處理模塊和上層 PROFIBUS DP 主站之間的通信。 設計 IM 155-5 DP ST 接口模塊可用螺絲直接固定到 S7-1500 安裝導軌上。IM 155-5 DP ST 具有以下功能： 錯誤 (Error)、運行 (RUN) 和維護 (MAINT) 診斷顯示。 使用 9 針 SUB-D 連接器連接至 PROFIBUS；供貨范圍內包括一個 6ES7972-0BB70-0XA0 型 PROFIBUS 連接器。 24 VDC 電源模塊用于連通電源電壓。 使用鎖、封條或電纜扣，針對未*的訪問為接口模塊提供保護。 技術規范 Article number 6ES7155-5BA00-0AB0   ET 200MP, IM155-5 DP ST General information   Product type designation IM 155-5 DP ST HW functional status FS01 Firmware version V2.0.0 Vendor identification (VendorID) 81AAh Product function   ● I&M data Yes; I&M0 to I&M3 Engineering with   ● STEP 7 TIA Portal configurable/integrated as of version V13 / V13 ● STEP 7 configurable/integrated as of version V5.5 SP3 / - ● PROFIBUS as of GSD version/GSD revision V1.0 / V5.1 Configuration control   via user data No via dataset No Supply voltage   Type of supply voltage DC Rated value (DC) 24 V permissible range, lower limit (DC) 20.4 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Short-circuit protection Yes Mains buffering   ● Mains/voltage failure stored energy time 5 ms Input current   Current consumption (rated value) 0.2 A; at 24 V DC and without load Current consumption, max. 1.2 A; at 20.4 V DC and max. load Inrush current, max. 4 A I²t 0.09 A²·s from interface 5 V DC, max. 80 mA Power   Infeed power to the backplane bus 14 W Power loss   Power loss, typ. 4 W Address area   Address space per module   ● Address space per module, max. 32 byte; per input / output Address space per station   ● Address space per station, max. 244 byte; per input / output Hardware configuration   Integrated power supply Yes System power supply can be plugged in to left of IM No Number of permissible power segments 1 Rack   ● Modules per rack, max. 12; I/O modules Interfaces   Number of PROFIBUS interfaces 1 1. Interface   Interface types   ● RS 485 Yes Functionality   ● PROFIBUS DP slave Yes RS 485   ● Transmission rate, max. 12 Mbit/s PROFIBUS DP   Services   — SYNC capability Yes — FREEZE capability Yes — DPV1 Yes Isochronous mode   Isochronous operation (application synchronized up to terminal) No Interrupts/diagnostics/status information   Status indicator Yes Alarms Yes Diagnostic functions Yes Diagnostics indication LED   ● RUN LED Yes; Green LED ● ERROR LED Yes; Red LED ● MAINT LED Yes; yellow LED ● Connection display DP Yes; Green LED Potential separation   between backplane bus and electronics No between PROFIBUS DP and all other circuit components Yes between supply and all other circuits No Isolation   Isolation tested with 707 V DC (type test) Ambient conditions   Ambient temperature during operation   ● horizontal installation, min. 0 °C ● horizontal installation, max. 60 °C ● vertical installation, min. 0 °C ● vertical installation, max. 40 °C Connection method   ET-Connection   ● via BU/BA Send No Dimensions   Width 35 mm Height 147 mm Depth 129 mm Weights   Weight, approx. 360 g

  全部關于 IM 155-5 DP 產品與解決方案在線目錄與訂購系統技術信息服務與支持與合作伙伴服務項目