6ES7677-2AA41-0FB0

SIMATIC ET 200SP Open 控制器,CPU 1515SP PC. 4 GB RAM, 30GB CFAST mit WES 7 P 64 位 預安裝, mit S7-1500 軟件控制器 CPU 1505SP 預安裝, 接口： 1x 插槽 CFAST,1x 插槽 SD/MMC, 1x 連接 用于 ET 200SP Bus- ADAPTER PROFINET, 1x 10/100/1000 MBit/s 以太網, 3x USB, 1x DVI-I 顯卡連接, 文檔 auf DVD, 恢復 DVD

公司名稱：上海朔川電氣設備有限公司

• 聯 系 人：吉夢琪
• ：
• 地址：上海市金山區涇波路129號
• ：2840735331

• CPU 1515SP PC 訂貨數據   附件   產品信息   組態工具 跳轉到 概述 應用 設計 功能 技術規范 更多信息 概述 多功能一體的“交鑰匙”解決方案，預裝 SIMATIC S7-1500 Software Controller 或故障安全型軟控制器，也可預裝 WinCC Runtime Advanced 通過故障安全型，可以在故障安全環境中控制機械設備或裝置。這樣就能滿足需要 IEC 61508 第 2 版的 SIL3（安全完整性等級）安全等級或 ISO 13849 的 PL e（性能級別）的應用要求。 通過 ET 200SP 模塊進行集中式擴展（站的zui大寬度為 1 m，或者zui多 64 個模塊） SIMATIC 虛擬機監控程序： 用于將 Windows 系統與控制功能分離 通過雙核處理器來利用虛擬機監控程序 可交換閃存盤（CFast 卡）用于存儲操作系統、運行系統和項目數據 集成 DVI-I 圖形接口；3x USB 2.0 接口 2 個 PROFINET 接口：X1通過 PN-IO 總線適配器來連接（RJ45 或 FC），帶有 2 個端口；X2：千兆以太網接口 (RJ45) PROFINET IRT 開放式以太網通信（TCP/IP、UDP、Iso-on-TCP） Web 服務器功能可用于顯示信息、狀態、診斷以及用戶定義的 Web 頁面 可將 CM DP 作為 DP 主站進行 PROFIBUS DP 通信 組態控制（選項處理） 提高了專有技術和復制保護程度；具有 Security Integrated 功能 集成式系統診斷 集成運動控制功能用于控制速度控制軸和定位軸，支持外部編碼器 跟蹤功能 尤其適用于數量量很大且與用戶特定相關的開放式應用程序 集成控制功能并用 C/C++ 語言實現應用程序（使用 SIMATIC ODK-1500S 開放式開發工具包） 應用 ET 200SP 開放式控制器 CPU 1515SP PC (F) 是一種堅固耐用的緊湊型系統，它將 ET 200SP 控制器的功能與基于 PC 的平臺組合在一起。也就是說：該 CPU 提供了 ET 200SP 系統、S7-1500 控制器系列以及 TIA 環境的完整功能。該控制器可用于控制特殊及系列機器設備，或用于控制分布式配置中的設備。使用故障安全 SIMATIC S7-1500 軟控制器，可在同一個控制器上處理標準程序和安全程序。故障安全和標準用戶程序的生成是在 TIA Portal 中使用相同的編輯器完成的。借助于這種集成，故障安全應用具有了 SIMATIC 的系統優點和全面功能。該控制器尤其適用于數量較高的機器設備，例如，可用于攝像頭檢查以及圖像傳輸或打印機連接的質量保證。CPU 1515SP PC (F) 尤其顯示出自身的優點，特別是當需要使用編程語言 C 或 C ++ 集成特殊的自動化功能時，需要 Windows 軟件與軟件控制器的緊密連接時，或者大量數據必須 存儲。 預裝有 WinCC Runtime Advanced 的 CPU 1515SP PC (F) + HMI 提供了額外 HMI 功能?？梢栽谝慌_設備上集成控制和可視化功能。 設計 與其它 ET 200SP CPU 一樣，CPU 1515SP PC 可直接卡裝到 DIN 導軌上。ET 200SP I/O 模塊可以直接集中插入，并通過集成的背板總線進行通信。可以建立起 PN IO 和 S7 通信，并通過 ET 200SP 系統的 PROFINET 適配器來連接分布式 I/O。這樣，只需付出很小的努力，就可將系統集成到現有自動化環境中。 PROFIBUS CM DP 模塊向 CPU 1515SP PC 增加了 PROFIBUS 通信功能。 提供了以下接口： 1 x 千兆以太網接口 1 x PN IO 接口（通過 ET 200SP 總線適配器進行連接），帶 2 個端口 3 x USB 2.0（前面），例如，用于連接鍵盤和 USB 閃存盤 1 x DVI-I，例如，用于連接 SIMATIC 平板顯示器和多點觸控設備 該 CPU 還具有以下部件： 模式開關 可更換的大容量存儲器 CFast（具有安全密封件） 用于插入 SD/MMC 卡的附加存儲器 狀態 LED 燈 24 V DC 電源接口 針對不同要求需求，可提供不同的成套和預組態設備類型： Windows Embedded Standard 7 E（32 位）型號，帶 8 GB CFast 卡 CPU 1515SP PC (4 GB RAM) CPU 1515SP PC F (4 GB RAM) Windows Embedded Standard 7 P（64 位）（多點觸控）型號，帶 16 GB CFast 卡 CPU 1515SP PC (4 GB RAM) CPU 1515SP PC F (4 GB RAM) CPU 1515SP PC + HMI（4 GB RAM；包括 WinCC Runtime Advanced V13 SP1，帶 128/512/2048 個 Powertag） CPU 1515SP PC F + HMI（4 GB RAM；包括 WinCC Runtime Advanced V13 SP1，帶 128/512/2048 個 Powertag） 功能 使用 TIA Portal 中的工程組態工具 STEP7（以及 WinCC Advanced HMI 選項）進行組態和編程： 根據標準 IEC 61131-3 進行編程 支持的編程語言： SCL (IL)、LAD、FBD、STL、GRAPH7 (SFC) 基于可視化技術的創新實時系統： 通過集成 S7-1500 軟件控制器的實時系統，可實現 Windows 的并行、獨立運行： *的實時及確定特性 支持在控制器運行期間重啟 Windows 通過多個優先級控制的執行層次實現高速程序執行（循環、時間控制、通過 ROFINET 或 PROFIBUS 實現等式同步、通過過程和診斷報警實現事件驅動） 保持性數據的保存： 即使電源出現故障，CPU 1515SP PC 也確保工廠數據的安全： 電壓下降時可將保持性數據保存在 CPU 的 NVRAM 可在 CPU CFast 卡上存儲保持性數據（需要 UPS） 通信： 通過 ET 200SP 總線適配器進行 PROFINET IO 通信；通過 ET 200SP CM DP 進行 PROFIBUS 通信： PROFINET IO RT/IRT、等時同步模式、IO 控制器、I 設備、介質冗余、PROFIenergy、PROFIBUS DP 主站 通過 CPU 的 Windows 接口（千兆以太網）與 Windows 應用程序或外部設備進行 SIMATIC 和開放式用戶通信 通過組態控制（選項處理）實現靈活的集中組態 組態控制器并操作不同于該組態的設備（選件） 集成 Web 服務器 S7 1500 自動化系統的所有 CPU 都支持通過 Web 服務器來掃描 CPU。CPU Web 服務器提供以下診斷選項： 通過 LED 指示燈顯示 CPU 狀況和當前運行狀態 讀出診斷緩沖區條目 查詢模塊狀態 查詢當前消息 有關拓撲/PROFINET 設備狀態的信息 通過 CPU 的裝載存儲器傳送和管理用戶數據 通過用戶可編程的 Web 頁面支持特定設備功能的檢修與調試 跟蹤功能 S7 1500 自動化系統的所有 CPU 都支持跟蹤功能。該功能可以記錄每個周期的模擬量和數字量變量并通過 STEP 7 以曲線形式加以顯示。這對于運動控制或閉環控制應用十分有用 集成工藝功能： S7-1500 運動控制 PLCopen 塊用于通過 PROFINET IO IRT 接口來編程運動功能。該功能支持速度控制軸、定位軸和外部編碼器。 集成閉環控制功能 通用 PID 或 3 步控制器，具有集成優化功能集成溫度控制器 集成系統診斷 可通過連接的顯示器、HMI 設備、Web 服務器或軟件控制器的操作面板來顯示系統診斷。通過這種方式也可顯示變頻器消息。當 CPU 處于 STOP 模式時，也可進行系統診斷。若配置了新硬件組件，則自動更新診斷信息。 集成安全功能： 專有技術保護： 可以針對未*的訪問和修改，通過密碼可靠保護算法和程序塊。 訪問保護： 擴展訪問保護功能針對未*的組態更改提供全面保護。各種*級別可用于向不同的用戶組分配不同的權限。 完整性保護： 系統可針對未*的操縱為傳輸?shù)?CPU 的數據提供保護。CPU 可安全檢測到組態數據的改動或第三方傳輸。 技術規范 Article number 6ES7677-2AA31-0EB0 6ES7677-2AA41-0FB0   CPU 1515SP PC 4GB CPU 1515SP PC 4GB General information     Product type designation CPU 1515SP PC CPU 1515SP PC HW functional status FS06 FS05 Firmware version V2.1 V2.1 Engineering with     ● STEP 7 TIA Portal configurable/integrated as of version V14 SP1 V14 SP1 Installed software     ● Visualization No No ● Control S7-1500 Software Controller CPU 1505SP V2.1 S7-1500 Software Controller CPU 1505SP V2.1 Configuration control     via dataset Yes Yes Control elements     Mode selector switch 1 1 Supply voltage     Type of supply voltage 24 V DC 24 V DC permissible range, lower limit (DC) 19.2 V 19.2 V permissible range, upper limit (DC) 28.8 V 28.8 V Reverse polarity protection Yes Yes Mains buffering     ● Mains/voltage failure stored energy time 5 ms 5 ms Input current     Current consumption (rated value) 1.5 A; Full processor load, incl. ET 200SP modules and using USB 1.5 A; Full processor load, incl. ET 200SP modules and using USB Current consumption (in no-load operation), typ. 0.6 A 0.6 A Inrush current, max. 4.7 A; Rated value 4.7 A; Rated value Power     Active power input, max. 36 W; incl. ET 200SP modules and using USB 36 W; incl. ET 200SP modules and using USB Infeed power to the backplane bus 8.75 W 8.75 W Power loss     Power loss, typ. 15 W; without ET 200SP modules and without using USB 15 W; without ET 200SP modules and without using USB Processor     Processor Dual-Core 1 GHz, AMD G Series APU T40E Dual-Core 1 GHz, AMD G Series APU T40E Memory     Type of memory DDR3-SDRAM DDR3-SDRAM Main memory 4 GB RAM 4 GB RAM Flash Disk 30 GB 30 GB CFast memory card Yes; 30 GB flash memory Yes; 30 GB flash memory SIMATIC memory card required No No Work memory     ● integrated (for program) 1 Mbyte 1 Mbyte ● integrated (for data) 5 Mbyte 5 Mbyte ● integrated (for CPU function library of CPU Runtime) 10 Mbyte 10 Mbyte Load memory     ● integrated (on PC mass storage) 320 Mbyte 320 Mbyte Backup     ● with UPS Yes; all memory areas declared retentive Yes; all memory areas declared retentive ● with non-volatile memory Yes Yes CPU processing times     for bit operations, typ. 10 ns 10 ns for word operations, typ. 12 ns 12 ns for fixed point arithmetic, typ. 16 ns 16 ns for floating point arithmetic, typ. 64 ns 64 ns CPU-blocks     Number of elements (total) 6 000; In addition to blocks such as DBs, FBs and FCs, UDTs, global constants, etc. are also regarded as elements 6 000; In addition to blocks such as DBs, FBs and FCs, UDTs, global constants, etc. are also regarded as elements DB     ● Number, max. 5 999; Number range: 1 to 65535 5 999; Number range: 1 to 65535 ● Size, max. 5 Mbyte 5 Mbyte FB     ● Number, max. 5 998; Number range: 1 to 65535 5 998; Number range: 1 to 65535 ● Size, max. 512 kbyte 512 kbyte FC     ● Number, max. 5 999; Number range: 1 to 65535 5 999; Number range: 1 to 65535 ● Size, max. 512 kbyte 512 kbyte OB     ● Size, max. 1 048 kbyte 1 048 kbyte ● Number of free cycle OBs 100 100 ● Number of time alarm OBs 20 20 ● Number of delay alarm OBs 20 20 ● Number of cyclic interrupt OBs 20 20 ● Number of process alarm OBs 50 50 ● Number of DPV1 alarm OBs 3 3 ● Number of isochronous mode OBs 1 1 ● Number of technology synchronous alarm OBs 2 2 ● Number of startup OBs 100 100 ● Number of asynchronous error OBs 4 4 ● Number of synchronous error OBs 2 2 ● Number of diagnostic alarm OBs 1 1 Nesting depth     ● per priority class 24 24 Counters, timers and their retentivity     S7 counter     ● Number 2 048 2 048 Retentivity     — adjustable Yes Yes IEC counter     ● Number Any (only limited by the main memory) Any (only limited by the main memory) Retentivity     — adjustable Yes Yes S7 times     ● Number 2 048 2 048 Retentivity     — adjustable Yes Yes IEC timer     ● Number Any (only limited by the main memory) Any (only limited by the main memory) Retentivity     — adjustable Yes Yes Data areas and their retentivity     Retentive data area (incl. timers, counters, flags), max. 410 kbyte; For storage in NVRAM; for storage in mass storage 5 242 020 bytes 410 kbyte; For storage in NVRAM; for storage in mass storage 5 242 020 bytes Flag     ● Number, max. 16 kbyte 16 kbyte ● Number of clock memories 8; 8 clock memory bits, grouped into one clock memory byte 8; 8 clock memory bits, grouped into one clock memory byte Data blocks     ● Retentivity adjustable Yes Yes ● Retentivity preset No No Local data     ● per priority class, max. 64 kbyte; max. 16 KB per block 64 kbyte; max. 16 KB per block Address area     Number of IO modules 8 192 8 192 I/O address area     ● Inputs 32 kbyte; All inputs are in the process image 32 kbyte; All inputs are in the process image ● Outputs 32 kbyte; All outputs are in the process image 32 kbyte; All outputs are in the process image of which per assigned PC interface     — Inputs (volume) 8 kbyte 8 kbyte — Outputs (volume) 8 kbyte 8 kbyte Subprocess images     ● Number of subprocess images, max. 32 32 Hardware configuration     Integrated power supply Yes Yes Number of distributed IO systems 20 20 Number of DP masters     ● Via CM 1 1 Rack     ● Modules per rack, max. 64; CPU 1515SP PC + 64 modules + server module 64; CPU 1515SP PC + 64 modules + server module ● Number of lines, max. 1 1 PtP CM     ● Number of PtP CMs the number of connectable PtP CMs is only limited by the number of available slots the number of connectable PtP CMs is only limited by the number of available slots Time of day     Clock     ● Type Hardware clock Hardware clock ● Hardware clock (real-time) Yes; Resolution: 1 s Yes; Resolution: 1 s ● Backup time 6 wk; At 40 °C ambient temperature, typically 6 wk; At 40 °C ambient temperature, typically ● Deviation per day, max. 10 s; Typ.: 2 s 10 s; Typ.: 2 s Clock synchronization     ● supported Yes Yes ● to DP, master No No ● on Ethernet via NTP Yes Yes ● on Windows clock, slave Yes Yes Interfaces     Number of industrial Ethernet interfaces 2 2 Number of PROFINET interfaces 1 1 Number of PROFIBUS interfaces 1 1 Number of RS 485 interfaces 1; Via CM DP module 1; Via CM DP module Number of USB interfaces 3; 3x USB 2.0 on the front, 500 mA each – of which 2x 500 mA and 1x 100 mA simultaneously 3; 3x USB 2.0 on the front, 500 mA each – of which 2x 500 mA and 1x 100 mA simultaneously Number of SD card slots 1 1 Video interfaces     ● Graphics interface 1x DVI-I 1x DVI-I 1. Interface     Interface type PROFINET PROFINET automatic detection of transmission rate Yes Yes Autonegotiation Yes Yes Autocrossing Yes Yes Interface types     ● Number of ports 2 2 ● integrated switch Yes Yes ● RJ 45 (Ethernet) Yes; Via BusAdapter BA 2x RJ45 Yes; Via BusAdapter BA 2x RJ45 — Transmission rate, max. 100 Mbit/s 100 Mbit/s — Industrial Ethernet status LED Yes Yes ● BusAdapter (PROFINET) Yes; Applicable BusAdapter: BA 2x RJ45, BA 2x FC Yes; Applicable BusAdapter: BA 2x RJ45, BA 2x FC Functionality     ● Number of connections via this interface 88 88 ● PROFINET IO Controller Yes Yes ● PROFINET IO Device Yes Yes ● SIMATIC communication Yes Yes ● Open IE communication Yes Yes ● Web server Yes Yes PROFINET IO Controller     Services     — Isochronous mode Yes Yes — shortest clock pulse 500 µs 500 µs — IRT Yes Yes — MRP Yes Yes — MRPD Yes Yes — Prioritized startup Yes; Max. 32 PROFINET devices Yes; Max. 32 PROFINET devices — Number of connectable IO Devices, max. 128 128 — Of which IO devices with IRT, max. 64 64 — of which in line, max. 64 64 — Number of connectable IO Devices for RT, max. 128 128 — of which in line, max. 128 128 — Number of IO Devices that can be simultaneously activated/deactivated, max. 8 8 — IO Devices changing during operation (partner ports), supported Yes Yes — Number of IO Devices per tool, max. 8 8 — Updating times The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data Update time for IRT     — for send cycle of 500 µs 500 µs to 8 ms 500 µs to 8 ms — for send cycle of 1 ms 1 ms to 16 ms 1 ms to 16 ms — for send cycle of 2 ms 2 ms to 32 ms 2 ms to 32 ms — for send cycle of 4 ms 4 ms to 64 ms 4 ms to 64 ms — With IRT and parameterization of "odd" send cycles Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs) Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs) Update time for RT     — for send cycle of 500 µs 500 µs to 256 ms 500 µs to 256 ms — for send cycle of 1 ms 1 ms to 512 ms 1 ms to 512 ms — for send cycle of 2 ms 2 ms to 512 ms 2 ms to 512 ms — for send cycle of 4 ms 4 ms to 512 ms 4 ms to 512 ms PROFINET IO Device     Services     — Isochronous mode No No — IRT Yes Yes — MRP Yes Yes — MRPD Yes Yes — Prioritized startup Yes Yes — Shared device Yes Yes — Number of IO Controllers with shared device, max. 4 4 2. Interface     Interface type Integrated Ethernet interface Integrated Ethernet interface automatic detection of transmission rate Yes Yes Autonegotiation Yes Yes Autocrossing Yes Yes Interface types     ● Number of ports 1 1 ● RJ 45 (Ethernet) Yes; Integrated Yes; Integrated — Transmission rate, max. 1 000 Mbit/s 1 000 Mbit/s — Industrial Ethernet status LED No No 3. Interface     Interface type PROFIBUS with CM DP PROFIBUS with CM DP Interface types     ● RS 485 Yes Yes Functionality     ● Number of connections via this interface 44 44 ● PROFIBUS DP master Yes Yes ● PROFIBUS DP slave Yes Yes ● SIMATIC communication Yes Yes DP master     Services     — Equidistance No No — Isochronous mode No No — Number of connectable DP slaves, max. 125 125 DP slave     Services     — Equidistance No No — Isochronous mode No No RS 485     ● Transmission rate, max. 12 Mbit/s 12 Mbit/s Protocols     Number of connections     ● Number of connections, max. 88 88 ● Number of connections reserved for ES/HMI/web 10 10 ● Number of S7 routing paths 16 16 SIMATIC communication     ● PG/OP communication Yes Yes ● S7 routing Yes Yes ● S7 communication, as server Yes Yes ● S7 communication, as client Yes Yes ● User data per job, max. 64 kbyte 64 kbyte Open IE communication     ● TCP/IP Yes Yes — Data length, max. 64 kbyte 64 kbyte ● ISO-on-TCP (RFC1006) Yes Yes — Data length, max. 64 kbyte 64 kbyte ● UDP Yes Yes — Data length, max. 1 472 kbyte 1 472 kbyte ● SNMP Yes Yes ● DCP Yes Yes ● LLDP Yes Yes Web server     ● HTTP Yes; Via Windows and PROFINET interface Yes; Via Windows and PROFINET interface ● HTTPS Yes; Only via PROFINET interface Yes; Only via PROFINET interface OPC UA     ● OPC UA Server Data access (read, write, subscribe), runtime license required Yes; Data access (read, write, subscribe), runtime license required — Application authentication Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 Yes; Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 — Security policies Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 Yes; Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 — User authentication "anonymous" or by user name & password Yes; "anonymous" or by user name & password Further protocols     ● MODBUS Yes; MODBUS TCP Yes; MODBUS TCP Media redundancy     ● Switchover time on line break, typ. 200 ms 200 ms ● Number of stations in the ring, max. 50 50 S7 message functions     Number of login stations for message functions, max. 32 32 Program alarms Yes Yes Number of configurable program alarms 10 000 10 000 Number of simultaneously active program alarms     ● Number of program alarms 1 000 1 000 ● Number of alarms for system diagnostics 200 200 ● Number of alarms for motion technology objects 160 160 Test commissioning functions     Joint commission (Team Engineering) Yes; Parallel online access possible for up to 8 engineering systems Yes; Parallel online access possible for up to 8 engineering systems Status block Yes; up to 8 simultaneously Yes; up to 8 simultaneously Single step No No Status/control     ● Status/control variable Yes Yes ● Variables Inputs, outputs, memory bits, DB, times, counters Inputs, outputs, memory bits, DB, times, counters ● Number of variables, max.     — of which status variables, max. 200 200 — of which control variables, max. 200 200 Forcing     ● Forcing Yes Yes ● Forcing, variables Inputs, outputs Inputs, outputs ● Number of variables, max. 200 200 Diagnostic buffer     ● present Yes Yes ● Number of entries, max. 1 000 1 000 — of which powerfail-proof 300 300 Traces     ● Number of configurable Traces 4 4 ● Memory size per trace, max. 512 kbyte 512 kbyte Interrupts/diagnostics/status information     Diagnostics indication LED     ● RUN/STOP LED Yes Yes ● ERROR LED Yes Yes ● MAINT LED Yes Yes Supported technology objects     Motion Control Yes Yes ● Number of available Motion Control resources for technology objects (except cam disks) 2 400 2 400 ● Required Motion Control resources     — per speed-controlled axis 40; per axis 40; per axis — per positioning axis 80; per axis 80; per axis — per synchronous axis 160; per axis 160; per axis — per external encoder 80; per external encoder 80; per external encoder — per output cam 20; per cam 20; per cam — per cam track 160; per cam track 160; per cam track — per probe 40; per probe 40; per probe ● Positioning axis     — Number of positioning axes at motion control cycle of 4 ms (typical value) 5 5 — Number of positioning axes at motion control cycle of 8 ms (typical value) 12 12 Controller     ● PID_Compact Yes; Universal PID controller with integrated optimization Yes; Universal PID controller with integrated optimization ● PID_3Step Yes; PID controller with integrated optimization for valves Yes; PID controller with integrated optimization for valves ● PID-Temp Yes; PID controller with integrated optimization for temperature Yes; PID controller with integrated optimization for temperature Counting and measuring     ● High-speed counter Yes Yes EMC     Emission of radio interference acc. to EN 55 011     ● Limit class A, for use in industrial areas Yes Yes Standards, approvals, certificates     CE mark Yes Yes CSA approval Yes Yes cULus Yes Yes FM approval Yes Yes RCM (formerly C-TICK) Yes Yes Ambient conditions     Ambient temperature during operation     ● min. 0 °C 0 °C ● max. Up to 60 °C with max. 32 ET 200SP modules and 3x 100 mA USB load; up to 55 °C with max. 64 ET 200SP modules and 2x max. 500 mA and 1x max. 100 mA USB load Up to 60 °C with max. 32 ET 200SP modules and 3x 100 mA USB load; up to 55 °C with max. 64 ET 200SP modules and 2x max. 500 mA and 1x max. 100 mA USB load ● horizontal installation, min. 0 °C 0 °C ● horizontal installation, max. 60 °C 60 °C ● vertical installation, min. 0 °C 0 °C ● vertical installation, max. 50 °C; With max. 32 ET 200SP modules and 3x 100 mA USB load 50 °C; With max. 32 ET 200SP modules and 3x 100 mA USB load Ambient temperature during storage/transportation     ● min. -40 °C -40 °C ● max. 70 °C 70 °C Vibrations     ● Operation, tested according to IEC 60068-2-6 Yes Yes ● Transport, tested acc. to IEC 60068-2-6 Yes Yes Shock test     ● tested according to IEC 60068-2-27 Yes Yes ● tested according to IEC 60068-2-6 Yes Yes Shock testing     ● tested according to IEC 60068-2-29 Yes Yes ● Storage/transport, tested acc. to IEC 60068-2-27 Yes Yes Operating systems     Operating systems Windows Embedded Standard 7 E 32-bit Windows Embedded Standard 7 P 64-bit Configuration     Programming     Programming language     — LAD Yes Yes — FBD Yes Yes — STL Yes Yes — SCL Yes Yes — CFC No No — GRAPH Yes Yes Know-how protection     ● User program protection/password protection Yes Yes ● Copy protection Yes Yes ● Block protection Yes Yes Access protection     ● Protection level: Write protection Yes Yes ● Protection level: Read/write protection Yes Yes ● Protection level: Complete protection Yes Yes Cycle time monitoring     ● lower limit adjustable minimum cycle time adjustable minimum cycle time ● upper limit adjustable maximum cycle time adjustable maximum cycle time Open Development interfaces     ● Size of ODK SO file, max. 3.8 Mbyte 3.8 Mbyte Peripherals/Options     Peripherals     ● SD card Optionally for additional mass storage Optionally for additional mass storage Dimensions     Width 160 mm 160 mm Height 117 mm 117 mm Depth 75 mm 75 mm Weights     Weight, approx. 0.83 kg 0.83 kg   Article number 6ES7677-2FA31-0EB0 6ES7677-2FA41-0FB0   CPU 1515SP PC F CPU 1515SP PC F General information     Product type designation CPU 1515SP PC F CPU 1515SP PC F HW functional status FS05 FS02 Firmware version V2.1 V2.1 Engineering with     ● STEP 7 TIA Portal configurable/integrated as of version V14 SP1 V14 SP1 Installed software     ● Visualization No No ● Control S7-1500 Software Controller CPU 1505SP F S7-1500 Software Controller CPU 1505SP F Configuration control     via dataset Yes Yes Control elements     Mode selector switch 1 1 Supply voltage     Type of supply voltage 24 V DC 24 V DC permissible range, lower limit (DC) 19.2 V 19.2 V permissible range, upper limit (DC) 28.8 V 28.8 V Reverse polarity protection Yes Yes Mains buffering     ● Mains/voltage failure stored energy time 5 ms 5 ms Input current     Current consumption (rated value) 1.5 A; Full processor load, incl. ET 200SP modules and using USB 1.5 A; Full processor load, incl. ET 200SP modules and using USB Current consumption (in no-load operation), typ. 0.6 A 0.6 A Inrush current, max. 4.7 A; Rated value 4.7 A; Rated value Power     Active power input, max. 36 W; incl. ET 200SP modules and using USB 36 W; incl. ET 200SP modules and using USB Infeed power to the backplane bus 8.75 W 8.75 W Power loss     Power loss, typ. 15 W; without ET 200SP modules and without using USB 15 W; without ET 200SP modules and without using USB Processor     Processor Dual-Core 1 GHz, AMD G Series APU T40E Dual-Core 1 GHz, AMD G Series APU T40E Memory     Type of memory DDR3-SDRAM DDR3-SDRAM Main memory 4 GB RAM 4 GB RAM Flash Disk 30 GB 30 GB CFast memory card Yes; 30 GB flash memory Yes; 30 GB flash memory SIMATIC memory card required No No Work memory     ● integrated (for program) 1.5 Mbyte 1.5 Mbyte ● integrated (for data) 5 Mbyte 5 Mbyte ● integrated (for CPU function library of CPU Runtime) 10 Mbyte 10 Mbyte Load memory     ● integrated (on PC mass storage) 320 Mbyte 320 Mbyte Backup     ● with UPS Yes; all memory areas declared retentive Yes; all memory areas declared retentive ● with non-volatile memory Yes Yes CPU processing times     for bit operations, typ. 10 ns 10 ns for word operations, typ. 12 ns 12 ns for fixed point arithmetic, typ. 16 ns 16 ns for floating point arithmetic, typ. 64 ns 64 ns CPU-blocks     Number of elements (total) 6 000; In addition to blocks such as DBs, FBs and FCs, UDTs, global constants, etc. are also regarded as elements 6 000; In addition to blocks such as DBs, FBs and FCs, UDTs, global constants, etc. are also regarded as elements DB     ● Number, max. 5 999; Number range: 1 to 65535 5 999; Number range: 1 to 65535 ● Size, max. 5 Mbyte 5 Mbyte FB     ● Number, max. 5 998; Number range: 1 to 65535 5 998; Number range: 1 to 65535 ● Size, max. 512 kbyte 512 kbyte FC     ● Number, max. 5 999; Number range: 1 to 65535 5 999; Number range: 1 to 65535 ● Size, max. 512 kbyte 512 kbyte OB     ● Size, max. 1 048 kbyte 512 kbyte ● Number of free cycle OBs 100 100 ● Number of time alarm OBs 20 20 ● Number of delay alarm OBs 20 20 ● Number of cyclic interrupt OBs 20 20 ● Number of process alarm OBs 50 50 ● Number of DPV1 alarm OBs 3 3 ● Number of isochronous mode OBs 1 1 ● Number of technology synchronous alarm OBs 2 2 ● Number of startup OBs 100 100 ● Number of asynchronous error OBs 4 4 ● Number of synchronous error OBs 2 2 ● Number of diagnostic alarm OBs 1 1 Nesting depth     ● per priority class 24; Up to 8 possible for F-blocks 24; Up to 8 possible for F-blocks Counters, timers and their retentivity     S7 counter     ● Number 2 048 2 048 Retentivity     — adjustable Yes Yes IEC counter     ● Number Any (only limited by the main memory) Any (only limited by the main memory) Retentivity     — adjustable Yes Yes S7 times     ● Number 2 048 2 048 Retentivity     — adjustable Yes Yes IEC timer     ● Number Any (only limited by the main memory) Any (only limited by the main memory) Retentivity     — adjustable Yes Yes Data areas and their retentivity     Retentive data area (incl. timers, counters, flags), max. 410 kbyte; For storage in NVRAM; for storage in mass storage 5 242 020 bytes 410 kbyte; For storage in NVRAM; for storage in mass storage 5 242 020 bytes Flag     ● Number, max. 16 kbyte 16 kbyte ● Number of clock memories 8; 8 clock memory bits, grouped into one clock memory byte 8; 8 clock memory bits, grouped into one clock memory byte Data blocks     ● Retentivity adjustable Yes Yes ● Retentivity preset No No Local data     ● per priority class, max. 64 kbyte; max. 16 KB per block 64 kbyte; max. 16 KB per block Address area     Number of IO modules 8 192 8 192 I/O address area     ● Inputs 32 kbyte; All inputs are in the process image 32 kbyte; All inputs are in the process image ● Outputs 32 kbyte; All outputs are in the process image 32 kbyte; All outputs are in the process image of which per assigned PC interface     — Inputs (volume) 8 kbyte 8 kbyte — Outputs (volume) 8 kbyte 8 kbyte Subprocess images     ● Number of subprocess images, max. 32 32 Hardware configuration     Integrated power supply Yes Yes Number of distributed IO systems 20 20 Number of DP masters     ● Via CM 1 1 Rack     ● Modules per rack, max. 64; CPU 1515SP PC + 64 modules + server module 64; CPU 1515SP PC + 64 modules + server module ● Number of lines, max. 1 1 PtP CM     ● Number of PtP CMs the number of connectable PtP CMs is only limited by the number of available slots the number of connectable PtP CMs is only limited by the number of available slots Time of day     Clock     ● Type Hardware clock Hardware clock ● Hardware clock (real-time) Yes; Resolution: 1 s Yes; Resolution: 1 s ● Backup time 6 wk; At 40 °C ambient temperature, typically 6 wk; At 40 °C ambient temperature, typically ● Deviation per day, max. 10 s; Typ.: 2 s 10 s; Typ.: 2 s Clock synchronization     ● supported Yes Yes ● to DP, master No No ● on Ethernet via NTP Yes Yes ● on Windows clock, slave Yes Yes Interfaces     Number of industrial Ethernet interfaces 2 2 Number of PROFINET interfaces 1 1 Number of PROFIBUS interfaces 1 1 Number of RS 485 interfaces 1; Via CM DP module 1; Via CM DP module Number of USB interfaces 3; 3x USB 2.0 on the front, 500 mA each – of which 2x 500 mA and 1x 100 mA simultaneously 3; 3x USB 2.0 on the front, 500 mA each – of which 2x 500 mA and 1x 100 mA simultaneously Number of SD card slots 1 1 Video interfaces     ● Graphics interface 1x DVI-I 1x DVI-I 1. Interface     Interface type PROFINET PROFINET automatic detection of transmission rate Yes Yes Autonegotiation Yes Yes Autocrossing Yes Yes Interface types     ● Number of ports 2 2 ● integrated switch Yes Yes ● RJ 45 (Ethernet) Yes; Via BusAdapter BA 2x RJ45 Yes; Via BusAdapter BA 2x RJ45 — Transmission rate, max. 100 Mbit/s 100 Mbit/s — Industrial Ethernet status LED Yes Yes ● BusAdapter (PROFINET) Yes; Applicable BusAdapter: BA 2x RJ45, BA 2x FC Yes; Applicable BusAdapter: BA 2x RJ45, BA 2x FC Functionality     ● Number of connections via this interface 88 88 ● PROFINET IO Controller Yes Yes ● PROFINET IO Device Yes Yes ● SIMATIC communication Yes Yes ● Open IE communication Yes Yes ● Web server Yes Yes PROFINET IO Controller     Services     — Isochronous mode Yes Yes — shortest clock pulse 500 µs 500 µs — IRT Yes Yes — MRP Yes Yes — MRPD Yes Yes — Prioritized startup Yes; Max. 32 PROFINET devices Yes; Max. 32 PROFINET devices — Number of connectable IO Devices, max. 128 128 — Of which IO devices with IRT, max. 64 64 — of which in line, max. 64 64 — Number of connectable IO Devices for RT, max. 128 128 — of which in line, max. 128 128 — Number of IO Devices that can be simultaneously activated/deactivated, max. 8 8 — IO Devices changing during operation (partner ports), supported Yes Yes — Number of IO Devices per tool, max. 8 8 — Updating times The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data Update time for IRT     — for send cycle of 500 µs 500 µs to 8 ms 500 µs to 8 ms — for send cycle of 1 ms 1 ms to 16 ms 1 ms to 16 ms — for send cycle of 2 ms 2 ms to 32 ms 2 ms to 32 ms — for send cycle of 4 ms 4 ms to 64 ms 4 ms to 64 ms — With IRT and parameterization of "odd" send cycles Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs) Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs) Update time for RT     — for send cycle of 500 µs 500 µs to 256 ms 500 µs to 256 ms — for send cycle of 1 ms 1 ms to 512 ms 1 ms to 512 ms — for send cycle of 2 ms 2 ms to 512 ms 2 ms to 512 ms — for send cycle of 4 ms 4 ms to 512 ms 4 ms to 512 ms PROFINET IO Device     Services     — Isochronous mode No No — IRT Yes Yes — MRP Yes Yes — MRPD Yes Yes — Prioritized startup Yes Yes — Shared device Yes Yes — Number of IO Controllers with shared device, max. 4 4 2. Interface     Interface type Integrated Ethernet interface Integrated Ethernet interface automatic detection of transmission rate Yes Yes Autonegotiation Yes Yes Autocrossing Yes Yes Interface types     ● Number of ports 1 1 ● RJ 45 (Ethernet) Yes; Integrated Yes; Integrated — Transmission rate, max. 1 000 Mbit/s 1 000 Mbit/s — Industrial Ethernet status LED No No 3. Interface     Interface type PROFIBUS with CM DP PROFIBUS with CM DP Interface types     ● RS 485 Yes Yes Functionality     ● Number of connections via this interface 44 44 ● PROFIBUS DP master Yes Yes ● PROFIBUS DP slave Yes Yes ● SIMATIC communication Yes Yes DP master     Services     — Equidistance No No — Isochronous mode No No — Number of connectable DP slaves, max. 125 125 DP slave     Services     — Equidistance No No — Isochronous mode No No RS 485     ● Transmission rate, max. 12 Mbit/s 12 Mbit/s Protocols     Number of connections     ● Number of connections, max. 88 88 ● Number of connections reserved for ES/HMI/web 10 10 ● Number of S7 routing paths 16 16 SIMATIC communication     ● PG/OP communication Yes Yes ● S7 routing Yes Yes ● S7 communication, as server Yes Yes ● S7 communication, as client Yes Yes ● User data per job, max. 64 kbyte 64 kbyte Open IE communication     ● TCP/IP Yes Yes — Data length, max. 64 kbyte 64 kbyte ● ISO-on-TCP (RFC1006) Yes Yes — Data length, max. 64 kbyte 64 kbyte ● UDP Yes Yes — Data length, max. 1 472 kbyte 1 472 kbyte ● SNMP Yes Yes ● DCP Yes Yes ● LLDP Yes Yes Web server     ● HTTP Yes; Via Windows and PROFINET interface Yes; Via Windows and PROFINET interface ● HTTPS Yes; Only via PROFINET interface Yes; Only via PROFINET interface OPC UA     ● OPC UA Client   No ● OPC UA Server Data access (read, write, subscribe), runtime license required Yes; Data access (read, write, subscribe), runtime license required — Application authentication Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 Yes; Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 — Security policies Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 Yes; Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 — User authentication "anonymous" or by user name & password Yes; "anonymous" or by user name & password Further protocols     ● MODBUS Yes; MODBUS TCP Yes; MODBUS TCP Media redundancy     ● Switchover time on line break, typ. 200 ms 200 ms ● Number of stations in the ring, max. 50 50 S7 message functions     Number of login stations for message functions, max. 32 32 Program alarms Yes Yes Number of configurable program alarms 10 000 10 000 Number of simultaneously active program alarms     ● Number of program alarms 1 000 1 000 ● Number of alarms for system diagnostics 200 200 ● Number of alarms for motion technology objects 160 160 Test commissioning functions     Joint commission (Team Engineering) Yes; Parallel online access possible for up to 8 engineering systems Yes; Parallel online access possible for up to 8 engineering systems Status block Yes; up to 8 simultaneously Yes; up to 8 simultaneously Single step No No Status/control     ● Status/control variable Yes Yes ● Variables Inputs, outputs, memory bits, DB, times, counters Inputs, outputs, memory bits, DB, times, counters ● Number of variables, max.     — of which status variables, max. 200 200 — of which control variables, max. 200 200 Forcing     ● Forcing Yes Yes ● Forcing, variables Inputs, outputs Inputs, outputs ● Number of variables, max. 200 200 Diagnostic buffer     ● present Yes Yes ● Number of entries, max. 1 000 1 000 — of which powerfail-proof 300 300 Traces     ● Number of configurable Traces 4 4 ● Memory size per trace, max. 512 kbyte 512 kbyte Interrupts/diagnostics/status information     Diagnostics indication LED     ● RUN/STOP LED Yes Yes ● ERROR LED Yes Yes ● MAINT LED Yes Yes Supported technology objects     Motion Control Yes Yes ● Number of available Motion Control resources for technology objects (except cam disks) 2 400 2 400 ● Required Motion Control resources     — per speed-controlled axis 40; per axis 40; per axis — per positioning axis 80; per axis 80; per axis — per synchronous axis 160; per axis 160; per axis — per external encoder 80; per external encoder 80; per external encoder — per output cam 20; per cam 20; per cam — per cam track 160; per cam track 160; per cam track — per probe 40; per probe 40; per probe ● Positioning axis     — Number of positioning axes at motion control cycle of 4 ms (typical value) 5 5 — Number of positioning axes at motion control cycle of 8 ms (typical value) 12 12 Controller     ● PID_Compact Yes; Universal PID controller with integrated optimization Yes; Universal PID controller with integrated optimization ● PID_3Step Yes; PID controller with integrated optimization for valves Yes; PID controller with integrated optimization for valves ● PID-Temp Yes; PID controller with integrated optimization for temperature Yes; PID controller with integrated optimization for temperature Counting and measuring     ● High-speed counter Yes Yes EMC     Emission of radio interference acc. to EN 55 011     ● Limit class A, for use in industrial areas Yes Yes Standards, approvals, certificates     CE mark Yes Yes CSA approval Yes Yes cULus Yes Yes FM approval Yes Yes RCM (formerly C-TICK) Yes Yes Highest safety class achievable in safety mode     Probability of failure (for service life of 20 years and repair time of 100 hours)     — Low demand mode: PFDavg in accordance with SIL3 < 2.00E-05 < 2.00E-05 — High demand/continuous mode: PFH in accordance with SIL3 < 1.00E-09 1/h < 1.00E-09 1/h Ambient conditions     Ambient temperature during operation     ● min. 0 °C 0 °C ● max. Up to 60 °C with max. 32 ET 200SP modules and 3x 100 mA USB load; up to 55 °C with max. 64 ET 200SP modules and 2x max. 500 mA and 1x max. 100 mA USB load Up to 60 °C with max. 32 ET 200SP modules and 3x 100 mA USB load; up to 55 °C with max. 64 ET 200SP modules and 2x max. 500 mA and 1x max. 100 mA USB load ● horizontal installation, min. 0 °C 0 °C ● horizontal installation, max. 60 °C 60 °C ● vertical installation, min. 0 °C 0 °C ● vertical installation, max. 50 °C; With max. 32 ET 200SP modules and 3x 100 mA USB load 50 °C; With max. 32 ET 200SP modules and 3x 100 mA USB load Ambient temperature during storage/transportation     ● min. -40 °C -40 °C ● max. 70 °C 70 °C Vibrations     ● Operation, tested according to IEC 60068-2-6 Yes Yes ● Transport, tested acc. to IEC 60068-2-6 Yes Yes Shock test     ● tested according to IEC 60068-2-27 Yes Yes ● tested according to IEC 60068-2-6 Yes Yes Shock testing     ● tested according to IEC 60068-2-29 Yes Yes ● Storage/transport, tested acc. to IEC 60068-2-27 Yes Yes Operating systems     Operating systems Windows Embedded Standard 7 E 32-bit Windows Embedded Standard 7 P 64-bit Configuration     Programming     Programming language     — LAD Yes; incl. failsafe Yes; incl. failsafe — FBD Yes; incl. failsafe Yes; incl. failsafe — STL Yes Yes — SCL Yes Yes — CFC No No — GRAPH Yes Yes Know-how protection     ● User program protection/password protection Yes Yes ● Copy protection Yes Yes ● Block protection Yes Yes Access protection     ● Protection level: Write protection Yes Yes ● Protection level: Read/write protection Yes Yes ● Protection level: Complete protection Yes Yes Cycle time monitoring     ● lower limit adjustable minimum cycle time adjustable minimum cycle time ● upper limit adjustable maximum cycle time adjustable maximum cycle time Open Development interfaces     ● Size of ODK SO file, max. 3.8 Mbyte 3.8 Mbyte Peripherals/Options     Peripherals     ● SD card Optionally for additional mass storage Optionally for additional mass storage Dimensions     Width 160 mm 160 mm Height 117 mm 117 mm Depth 75 mm 75 mm Weights     Weight, approx. 0.83 kg 0.83 kg   更多信息 其他信息和下載 手冊 ET 200SP 開放式控制器手冊可從西門子（SIMATIC 客戶支持）免費下載。 https://support.industry.siemens.com/cs/ww/en/ps/13891/man 一般信息 http://www.siemens。。ｃｏｍ/open-controller SIMATIC 選型工具 http://www.siemens。。ｃｏｍ/tia-selection-tool 手冊 要下載相關的信息資料，請訪問： http://www.siemens。。ｃｏｍ/simatic/printmaterial

  全部關于 CPU 1515SP PC 產品與解決方案在線目錄與訂購系統技術信息服務與支持與合作伙伴服務項目