上海贊國自動化科技有限公司

免費會員

您現在的位置：上海贊國自動化科技有限公司>>西門子PLC>> 6EP1321-5BA00西門子單相12VDC調節電源

6EP1321-5BA00西門子單相12VDC調節電源

參考價:	面議

參考價:

面議

具體成交價以合同協議為準

6EP1321-5BA00 產品型號
品牌
經銷商 廠商性質
上海市 所在地

訪問次數：529更新時間：2022-04-27 08:02:44

在線詢價加入對比查看聯系方式

聯系我們時請說明是智能制造網上看到的信息，謝謝!

分享

西門子PLC

上海贊國自動化科技有限公司

免費會員·4年

聯系人：: 顏克志

在線咨詢給我留言

掃一掃訪問手機商鋪

產品簡介

西門子單相12VDC調節電源
6EP1321-5BA00
SITOP PSU100C 12 V/2 A 調節電源輸入：AC 100-230 V （DC 110-300 V）輸出：DC 12 V/2 A

產品介紹

西門子單相12VDC調節電源

6EP1321-5BA00

SITOP PSU100C 12 V/2 A 調節電源輸入：AC 100-230 V (DC 110-300 V) 輸出：DC 12 V/2 A

(SIEMENS)上海贊國自動化科技有限公司（西門子分銷商）

上海贊國自動化科技有限公司
：顏工[銷售工程師]
（）：-
傳真（）：-
：983991865
：

；
地址（Add）：上海市松江區思賢路1855弄91號

本公司只銷售西門子原裝*，享受西門子免費一年保修

西門子單相12VDC調節電源

6EP1322-5BA10

SITOP PSU100C 12 V/6.5 A 調節電源輸入：AC 120-230 V (DC 110-300 V) 輸出：DC 12 V/6.5 A

單相, 12 V DC

訂貨數據
附件
產品信息

跳轉到

概述

技術規范

附件

概述

單相 SITOP compact 是滿足低端性能要求的電源。它們具有極為節省空間的緊湊設計，尤其適合控制箱或小型控制柜內的分布式應用。此系列電源的特點是在整個負載范圍具有較低功耗?？蛰d運行期間的功耗極低，非常適合為頻繁處于待機模式的機器設備供電。SITOP PSU100C 電源具有較寬輸入范圍，適用于交流和直流電網；插入式端子促進了電纜連接。

主要產品亮點

12 V DC，2 A 和 6.5 A
單相，輸入范圍寬，適用于 85 V 至 264 VAC 或 110 V 至 300 VDC
因薄型設計而具有較小安裝表面
在整個負載范圍內保持高效率。
空載運行或待機期間的電能消耗很低
可調輸出電壓用來補償電壓降
綠色 LED 指示“12 V 正常”狀態
通過插入式連接端子進行預制接線和快速電氣連接
溫度范圍寬，-20 ~ +70℃
通過全面認證，如 UL、ATEX 或 GL

技術規范

Article number	6EP1321-5BA00	6EP1322-5BA10
Product	SITOP PSU100C	SITOP PSU100C
Power supply, type	12 V/2 A	12 V/6.5 A
Input
Input	1-phase AC or DC	1-phase AC or DC
Rated voltage value Vin rated	100 ... 230 V	100 ... 230 V
Voltage range AC	85 ... 264 V	85 ... 264 V
Input voltage
● at DC	110 ... 300 V	110 ... 300 V
Wide-range input	Yes	Yes
Overvoltage resistance	2.3 × Vin rated, 1.3 ms	2.3 × Vin rated, 1.3 ms
Mains buffering at Iout rated, min.	20 ms; at Vin = 230 V	20 ms; at Vin = 230 V
Rated line frequency 1	50 Hz	50 Hz
Rated line frequency 2	60 Hz	60 Hz
Rated line range	47 ... 63 Hz	47 ... 63 Hz
Input current
● at rated input voltage 100 V	0.63 A	1.6 A
● at rated input voltage 230 V	0.31 A	0.8 A
Switch-on current limiting (+25 °C), max.	33 A	31 A
I²t, max.	1.2 A²·s	3 A²·s
Built-in incoming fuse	internal	internal
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker: from 6 A characteristic B or from 3 A characteristic C	Recommended miniature circuit breaker: from 10 A characteristic B or from 6 A characteristic C
Output
Output	Controlled, isolated DC voltage	Controlled, isolated DC voltage
Rated voltage Vout DC	12 V	12 V
Total tolerance, static ±	3 %	3 %
Static mains compensation, approx.	0.5 %	0.5 %
Static load balancing, approx.	1 %	1 %
Residual ripple peak-peak, max.	200 mV	200 mV
Residual ripple peak-peak, typ.	40 mV	80 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	300 mV	300 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz)	50 mV	80 mV
Adjustment range	10.5 ... 12.9 V	10.5 ... 12.9 V
Product function Output voltage adjustable	Yes	Yes
Output voltage setting	via potentiometer	via potentiometer
Status display	Green LED for output voltage OK	Green LED for output voltage OK
On/off behavior	Overshoot of Vout approx. 5 %	Overshoot of Vout approx. 1 %
Startup delay, max.	0.6 s	1 s
Voltage rise, typ.	10 ms	500 ms
Rated current value Iout rated	2 A	6.5 A
Current range	0 ... 2 A	0 ... 6.5 A
● Note	+60 ... +70 °C: Derating 2%/K; at +70 °C Iout rated 1.6 A	+55 ... +70 °C: Derating 1.6%/K; at +70 °C Iout rated 4.9 A
Supplied active power typical	24 W	78 W
Parallel switching for enhanced performance	Yes; Start-up with single nominal load only	Yes; Start-up with single nominal load only
Numbers of parallel switchable units for enhanced performance	2	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	82 %	86 %
Power loss at Vout rated, Iout rated, approx.	5.8 W	12.5 W
Power loss [W] during no-load operation maximum	0.75 W	0.75 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.1 %	0.1 %
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.	3 %	3 %
Load step setting time 10 to 90%, typ.	4 ms	3 ms
Load step setting time 90 to 10%, typ.	3 ms	3 ms
Protection and monitoring
Output overvoltage protection	Yes, according to EN 60950-1	Yes, according to EN 60950-1
Current limitation, typ.	2.4 A	7.2 A
Property of the output Short-circuit proof	Yes	Yes
Short-circuit protection	Electronic shutdown, automatic restart	Electronic shutdown, automatic restart
Overload/short-circuit indicator	-	-
Safety
Primary/secondary isolation	Yes	Yes
Galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class	Class I	Class I
Leakage current
● maximum	3.5 mA	3.5 mA
● typical	0.4 mA	0.4 mA
CE mark	Yes	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
Explosion protection	ATEX (EX) II 3G Ex nA IIC T4; cCSAus (CSA C22.2 No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2, Group ABCD, T4	ATEX (EX) II 3G Ex nA IIC T4; cCSAus (CSA C22.2 No. 213-M1987, ANSI/ISA-12.12.01-2007) Class I, Div. 2, Group ABCD, T4
FM approval	-	-
CB approval	Yes	Yes
Marine approval	GL, ABS	GL, ABS
Degree of protection (EN 60529)	IP20	IP20
EMC
Emitted interference	EN 55022 Class B	EN 55022 Class B
Supply harmonics limitation	not applicable	EN 61000-3-2
Noise immunity	EN 61000-6-2	EN 61000-6-2
Operating data
Ambient temperature
● during operation	-20 ... +70 °C	-20 ... +70 °C
— Note	with natural convection	with natural convection
● during transport	-40 ... +85 °C	-40 ... +85 °C
● during storage	-40 ... +85 °C	-40 ... +85 °C
Humidity class according to EN 60721	Climate class 3K3, no condensation	Climate class 3K3, no condensation
Mechanics
Connection technology	screw-type terminals	screw-type terminals
Connections
● Supply input	L, N, PE: Removable screw terminal, each for 1 x 0.5 ... 2.5 mm²	L, N, PE: Removable screw terminal, each for 1 x 0.5 ... 2.5 mm²
● Output	+: 1 screw terminal for 0.5 ... 2.5 mm²; -: 2 screw terminals for 0.5 ... 2.5 mm²	+: 1 screw terminal for 0.5 ... 2.5 mm²; -: 2 screw terminals for 0.5 ... 2.5 mm²
● Auxiliary	-	-
Width of the enclosure	30 mm	52.5 mm
Height of the enclosure	80 mm	80 mm
Depth of the enclosure	100 mm	100 mm
Required spacing
● top	50 mm	50 mm
● bottom	50 mm	50 mm
● left	0 mm	0 mm
● right	0 mm	0 mm
Weight, approx.	0.12 kg	0.32 kg
Product feature of the enclosure housing for side-by-side mounting	Yes	Yes
Installation	Snaps onto DIN rail EN 60715 35x7.5/15	Snaps onto DIN rail EN 60715 35x7.5/15
Electrical accessories	Removable spring-type terminal 6EP1971-5BA00	Removable spring-type terminal 6EP1971-5BA00
MTBF at 40 °C	3 737 060 h	2 853 800 h
Other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)