進口內螺紋疏水閥,德國TOK疏水閥,進口蒸汽疏水閥進口內螺紋疏水閥是利用熱動力學特性,當凝結水排流較低時會發生第二次蒸發,并在粘度、密封等方面與蒸汽方面存在差異驅動啟閉件。
結構簡單,價格低,動作可靠.漏氣率<3%,不受壓力波動的影響,壓力范圍大.由于密封面不銹鋼,使用壽命高
進口內螺紋倒吊桶疏水閥產品介紹:垂直安裝密封性能*使用壽命長,適用于小型工藝設備蒸汽管網。
1、內置自動排空氣裝置能排接近飽和蒸汽溫度的空氣有效解決氣阻現象提高設備啟動效率。
2、即使凝結水負荷變化時自動調節型的浮球結構也能連續排除凝結水確保工藝所需溫度。
3、浮球結構避免了閥門啟閉件集中磨損的問題任意角度都能作為密封面使用壽命長。
4、浮球經過精細研磨其圓度誤差小于直徑的千分之二實現高效密封。
5、閥座設計位于水面下形成水封即使低負荷工況下也不會泄漏蒸汽。
6、內置大流通面積過濾網可在線更換內件和清理雜質。
德國托克TOK品牌:工作原理:
本疏水閥是利用熱動力學特性,當凝結水排流較低時會發生第二次蒸發,并在粘度、密封等方面與蒸汽方面存在差異驅動啟閉件。
結構簡單,價格低,動作可靠.漏氣率<3%,不受壓力波動的影響,壓力范圍大.由于密封面不銹鋼,使用壽命高-type disc type steam trap works:
The trap is the use of thermal dynamics, when the condensate drain is low, evaporation will occur the second time, and viscosity, sealing and so there are differences with the steam-driven hoist pieces.
thermal power disc-type steam trap structure is simple, low cost, reliable action. Leakage rate of <3%, free from pressure fluctuations, pressure range due to the sealing surface of stainless steel, service life than similar
結構特點:
1、帶蒸汽或空氣保溫裝置,不受環境溫度影響,減少動作頻率,延長壽命。
2、備有過濾器和排污。
3、該閥動作靈敏可靠,排水量大。
W-type disc type steam trap structural characteristics:
1, with steam or air heat unit, from ambient temperature to reduce the operating frequency and prolong life.
2, with filters and sewage.
暫無信息 |