進口自由浮球式疏水閥,德國TOK疏水閥,進口蒸汽疏水閥
進口自由浮球式疏水閥利用高精度研磨不銹鋼空心浮球在閥腔內隨著凝結水的液位變化開啟或關閉閥門。該疏水閥的結構比較簡單,主要由浮球和自動排空裝置組成。閥腔內*的動作元件——不銹鋼空心浮球,采用高精度研磨工藝制造,整個球面均可做密封面,工作時無集中磨損,使用壽命長 ; 閥腔內無易損件,可靠性高。浮球能根據水位變化而自由調節閥孔的開度,能連續排放凝結水,過冷度≈0℃,工作效率高,自動排空裝置分為兩種 :(低壓PN25以內)液囊熱敏元件組成和(過熱蒸汽系統)雙金屬片組成。
特征
1、自由浮球式蒸汽疏水閥能拓飽和凝結水,回執設備內不含有水先積聚,從而獲得zui高的加熱效率
2、自由浮球式蒸汽疏水閥蒸汽壓力變化時,不受影響,能連續工作性能穩定
3、自由浮球式蒸汽疏水閥漏汽變幻無常小,采用*研磨工藝制造,浮球精度高,密封性能好
4、自由浮球式蒸汽疏水閥自動排空氣性能好
5、自由浮球式蒸汽疏水閥壽命長,浮球的整個球面都可以做密封面,無集中磨損。
利用浮力原理,浮球根據凝結水量的多少,隨水位的變化而作升降,自動調節閥座孔的開度,連續排放凝結水,當凝結水停止進入時,浮球降的底部,回到關閉位置,排水停止,由于排水閥座孔總是在凝結水位以下,形成水封、水、氣自然分離,達到無蒸汽泄漏。
德國托克TOK品牌:進口自由浮球式蒸汽疏水閥結構特點及工作原理:
疏水閥未開始工作時,自由半浮球沉落在發射管上,當疏水處于排水狀態時,蒸汽經過過濾網和發射管進入閥體,當蒸汽體積增加到一定程度時,浮力使半浮球上浮,在蒸汽壓力作用下,半浮球靠向疏水噴咀將其封閉,阻止了蒸汽外逸。當大量凝結水進入閥體時,半浮球內蒸汽體積減少,此半浮球在自身重力作用下落,半浮球脫離疏水噴咀,完成了一個工作循環。繼而周而復始運動,起動自動排水阻汽的目的。Free semi-ball float steam trap structural characteristics and working principle of:
Trap did not start working, semi-float free in the launch tube on the sink, drain when the drainage in the state, the steam through the filter and the launch tube into the body, when the steam volume to a certain extent, the buoyancy of the semi-float floating in the steam under pressure, semi-hydrophobic nozzle to float their eyes closed, to prevent the steam to escape. When a large number of condensate into the body, the volume of steam within half reduced float, float in this semi-self-gravity drop, semi-float out of the hydrophobic nozzle, to complete a cycle of work. Then the cycle exercise, start automatically drain resistance steam purposes.
進口自由半浮球式蒸汽疏水閥主要性能規范 h
Chief Property And Specification
公稱壓力 PN(MPa) Nominal Pressure | 試驗壓力 PS(MPa) Text Pressure | zui高工作壓力DMO (MPa)Max Works Pressure | zui高工作溫度TMO(℃)Max Works Temperature | 適用介質 Suitable Medium | 漏汽率 Leakage Rate | zui高背壓率(%) Max Stress Rate |
1.6 | 2.4 | 1.6 | 220 | 蒸汽Steam、凝結水 | ≤0.5 | 85 |
要零件材料/The materials of primary accessories
零部件名稱Part and component name | 材質Material |
閥體、閥蓋Valve body、valve cover | 鑄鐵、鑄鋼、不銹鋼Cast iron、Cast steel、Stainless steel |
自由浮球Free float ball | 304/316不銹鋼304/316 Stainless steel |
閥座Valve seat | 高鉻不銹鋼High chrome stainless steel |
自動排空氣裝置Automatic air exhaust | 不銹鋼、熱敏元件Stainless steel、Thermo-sensitive element |
過濾網、罩Filtrating screen、Cover | 不銹鋼Stainless steel |