進口氣動保溫調節閥,德國TOK調節閥,進口保溫調節閥德國托克TOK品牌:進口氣動保溫調節閥,采用頂部導向不平衡式結構,高強度、重載荷、S型流道、壓降損失小、流量系數大、可調范圍廣、流量特性精度高。閥籠采用壓緊閥座設計,解決了傳統的螺紋擰入式閥座拆卸困難,泄漏量大等問題,延長了使用壽命。采用流開式設計,介質趨向于閥門開啟的方向,小開度可控性好,流量特性畸變小。根據工況要求可選擇降噪音、抗氣蝕的特殊閥籠。與10P00相比,10P60為保溫夾套型,主要應用于介質在常溫下容易凝結的場合,比如介質為石蠟。保溫夾套里注入蒸汽,加熱介質,維持介質的流動。
控制閥參數說明:
閥內件特點: 頂部導向型
不平衡內件結構
快拆式結構
閥體類型: 直通式
閥蓋形式: 保溫夾套型
流量特性: 等百分比
線性 快開
口徑范圍: DN15-200(1/2”-8”)
壓力等級: PN1.6、4.0Mpa(ANSI 150、300LB)
泄漏等級: ASME B16.104 Ⅴ(標準型閥座)
管道連接方式: 法蘭式
適用溫度范圍: -45°~ 550°
執行機構類型: 氣動薄膜式執行機構
氣動活塞式執行機構
電動執行機構
Series heat insulation jacket single-seat control valve adopts the top guided unbalanced structure, featured by high strength, heavy load, S type flow channel, low pressure drop loss, high flow coefficient, wide adjustable range, high flow characteristic precision, etc.
The cage adopts the press-in type seat design, which solves the problems of difficult disassembly and high leakage of the traditional thread screw-in type seat and prolongs the service life. The flow to open design is adopted, and the medium flow direction tends to the opening direction of the valve with good controllability of small opening and low flow characteristic distortion. Special cages with noise reduction and anti-cavitation functions can be offered according to the requirements in different service conditions. Compared with the 10P00 Series, the 10P60 Series valves are of heat insulation jacket type, mainly used in applications where media such as paraffin may easily coagulate at normal temperature. Fill the heat insulation jacket with steam to heat the medium and maintain its flow.
Parameters of control valves:
Trim features: top guided
unbalanced trim structure
quick disassembly type structure
Body type: straight-through type
Bonnet type: heat insulation jacket type
Flow characteristic: equal percentage
linear
quick open
Size: DN15-200(1/2”-8”)
Pressure class: PN1.6、4.0Mpa(ANSI 150、300LB)
Leakage class: ASME B16.104 Ⅴ(standard type seat)
Pipe connection type: flange type
Applicable temperature range: -45C°~ 550C°
Actuator type: pneumatic diaphragm actuator
pneumatic piston actuator
electric actuator
暫無信息 |