国产强伦姧在线观看无码,中文字幕99久久亚洲精品,国产精品乱码在线观看,色桃花亚洲天堂视频久久,日韩精品无码观看视频免费

手 機(jī)：

BRAY CONTROLS     PART NO.:92-1180-11300-502; SERIAL NO.:CA00072; CONTROL FUNCTION:DOUBLE ACTION.    球閥

DAG    RF-07-70.04    主軸
EDAG    RF-07-70.05    主軸
EDAG    RF-07-70.06    主軸
EDAG    RF_20_01_01_08    滑輪
EDAG    RF-09-01-20    主軸
EDAGE    RF-08-20.03    滑輪
EDAGE    RF-07-70.02    主軸
EDAGE    R1605 804 31.140mm    滑輪

BLEICHERT    1.40.076.1    滾珠軸承輸送器
BLEICHERT    FD-D-414AF    彈簧
BLEICHERT    LA625.6005    滾珠軸承
BLEICHERT    K8187.10B.3.10    滾子鏈
BLEICHERT    1.09.003E    滾珠軸承零件
BLEICHERT    LAG12X18X24X3    滾珠軸承
BLEICHERT    1.40.302    鏈輪
BLEICHERT    1.10.011E    滾珠軸承零件
BLEICHERT    VSTOPFEN.F301    滾珠軸承封閉插頭
BLEICHERT Automation GmbH & Co.KG    1.40.300    電磁離合器
BLEICHERT Automation GmbH&Co.KG    SCHM.PERMA.LC-SONDER?L    柱塞泵
BLEMO    ER22-0.37G-V2 NR    變頻器
Block    TT3 5-4-23    變壓器
Block    MF400/25    濾波器
Block    MF400/10    濾波器
Block    BLOCK-Art.-Nr.: STE 2500/4/23    變壓器2
Block    PVSE 400/24-40A    電源
Block    USTE1600/2*115/400VAC    變壓器
Block    PVSE 400/24-40    電源
Block    HLD 110-500/75    濾波器
Block    NKD 50/0,59    變壓器
Block    PVSE 400/24-20A    電源
Block    PVSE 400/24-20    電源
Block    PVSB 400/24-20    電源
Block    STEU1000/24/400VAC    變壓器
Block    PVSE400/24-10A    電源
Block    STE 1000/4/23    變壓器
Block    PVFE 24/24-40    自動控制器
Block    PVSE 400/24-10A    電源BRAY 92-1180-11300-502 A00072 球閥
Block    HLD110-500/30    濾波器
Block    PVFE 24/24-20    自動控制器

■ Supports bussed/rail and redundant power
■ -40°C to +80°C wide temperature operation
■ Withstands 25g shock and 4g vibration
■ CE and UL/cUL Class 1 Div 2 Zone 2 approvals
6 discrete input/output channels ◆ Form A normally open SPST 5A relays ◆ 4-32V logic input
XTA-MRNO Mechanical Relay Output Modules
99.0
(3.90)
114.5
(4.51)
22.5
(0.89)
DIMENSIONS ARE IN
MILLIMETERS (INCHES)
BUFF
DIGITAL
INPUT
4-32V DC
0-4V DC
1 (CLOSED)
0 (OPEN)
RELAY
OUTPUT
+7V
10K
38V 0.1uF
100K
RTN
XTA-MRNO-6 SIMPLIFIED I/O CHANNEL (1 OF 6)
DRIVER
LED
ISOLATED
CONTACTS
RELAY
(PULL-DOWN)
TVSBRAY 92-1180-11300-502 A00072 球閥
DIGITAL
INPUT
RELAY
OUTPUT
REG
+7V
POWER
12-32V
4 +
5 -
3
2
1
NC
NC
NC
BUS CONN
5 -
12-32V
BUS POWER
+
LOCAL POWER
-
-
-
TB3
INPUT/PWR
TERMINALS
BOTTOM VIEW
TB1 OF TX1
TB2 OF TX2
IN0
IN1
IN2
IN3
IN4
IN5
RTN
RTN
DC+
RTN
RTN
RTN
TB3 OF TX3
2 1 3 4
6 5 7 8
10 9 11 12
2 1 3 4
6 5 7 8
10 9 11 12
TB6 OF TX6
TB4 OF TX4
R5B
R4B
R4A
R5A
TB5 OF TX5
TERMINALS
OUTPUT
R0A
R0B
R1A
R1B
R2A
R2B
R3A
R3B
22 21 23 24
18 17 19 20
14 13 15 16 14 13 15 16
18 17 19 20
22 21 23 24
TOP VIEW
IN+
RTN
RTN
RLY
RLY
248-295-0880 ■ 248-624-9234 ■  ■ ■ 30765 Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners. Copyright ? Acromag, Inc. 2013. Data subject to change without notice. Printed in USA 7/2013
Ethernet I/O: BusWorks
?  XT Series
XTA-MRNO Mechanical Relay Output Modules
Performance Specifications
■ Digital Inputs (Logic Side)
Configuration
Six DC voltage inputs share return with power.
Input Signal Voltage Range
0 to +32V DC, 36V peak.
Input Signal Threshold
4V DC typical w/100mV hysteresis.
Input Impedance
10K? typical, input includes 10K? pull-down to
return.
Input Response Time
See Output Response Time.
Input Over-Voltage Protection
Bipolar transient voltage suppression (TVS diodes) and
capacitive filtering (0.1μF) is included at every input.
TVS diodes are rated for a working voltage up to 38V
DC, a breakdown voltage of 72V DC, and a clamping
voltage of 100V DC.
Input Current
3.2 mA at 32V DC, typical. Inputs include 10K? pull-
downs to return.
■ Relay Outputs (Field Side)
Configuration
Six normally open, isolated, SPST, mechanical relay
contacts.
Contact Type
1 Form A (Six Channels), plastic-sealed contacts.
Contact Material
Gold overlay silver-Nickel alloy (Au + Ag 90 Ni 10).
Maximum Switching Voltage
Up to 277 V AC or 125V DC, maximum.
Maximum Switching Current
5A maximum.
Minimum Load
1mA, 5V DC
Maximum Switching Power
Up to 1,250VA or 150W, maximum.
Contact Resistance
1000m? at 500V DC, minimum (initial contact
resistance).
Dielectric Strength
750V AC (50/60Hz) for 1 minute between open
contacts, 3000V AC (50/60Hz) for 1 minute from
contacts to input coil.
Mechanical Life
20 x 10 6 operations, minimum. External contact
protection is required for use with inductive loads.
Electrical Life
100 x 10 3 operations, minimum at 3A & 250V AC,
30V DC resistive. 50 x 10 3 operations, minimum at 5A
& 250V AC, 30V DC resistive w/ switching frequency
at 20 times/minute.
Note: It is not recommended to switch mechanical
relay contacts at high frequencies for long periods of
time as this will quickly degrade the life of the relay.
Output Response Time
5.25ms typical, 10ms maximum, no bounce measured
from input trigger to corresponding output contact
closure.
Note: External relay contact protection is required
for use with inductive loads. Failure to use adequate
protection may reduce contact life or damage the unit.
■ Environmental
Operating Temperature
-40 to 80°C (-40 to 176°F).
Storage Temperature
-40 to 80°C (-40 to 176°F).
Relative Humidity
5 to 95% non-condensing.
Power Requirement
12–32V DC SELV (Safety Extra Low Voltage), 0.9W.
Current draw varies with power voltage as follows
(current indicated is with all six relays energized).
Power Supply Current Draw
12V DC 62mA typical, 68mA maximum
15V DC 50mA typical, 55mA maximum
24V DC 32mA typical, 35mA maximum
32V DC 25mA typical, 27mA maximum
Isolation
Channel-to-channel and power isolation.
Peak: 1500V AC, ANSI/ISA-82.01-1988.
Continuous: 250V AC, 354V DC.
Shock and Vibration Immunity
Vibration: 4g, per IEC 60068-2-64.
Shock: 25g, per IEC 60068-2-27.
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
Approvals
CE compliant. UL/cUL Class I; Div. 2 Zone 2.
■ Physical
General
General purpose plastic enclosure for mounting on
35mm “T-type” DIN rail.
Case Material
Self-extinguishing polyamide, UL94 V-0 rated, color
light gray. General purpose NEMA Type 1 enclosure.
Circuit Board
Military grade fire-retardant epoxy glass per IPC-
4101/98 with humi-seal conformal coating.
I/O Connectors
Removable plug-in type terminal blocks rated for
12A/250V; AWG #26-12, stranded/solid copper wire.
Dimensions
Width = 22.5mm (0.9 inches), Length = 114.5mm
(4.51 inches), Depth = 99.0mm (3.90 inches).
Shipping Weight
0.5 pounds (0.22 Kg) packed.
Ordering Information
◆ Models
XTA-MRNO-6
6-channel mechanical relay output module
◆ Accessories
XTBUS-KIT
DIN rail bus power/excitation connector kit. Includes
one DIN rail bus connector (1005-070), one left-side
female connector terminal block (1005-220) and one
right side male connector terminal block (1005-221).
248-295-0880 ■ 248-624-9234 ■  ■ ■ 30765 Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: BusWorks
?  XT Series
Bulletin #8400-658e
Description
The XTA-120V-6 optocoupler module provides six
individually isolated 120V AC/DC digital (discrete)
inputs to sense on/off levels and drive open-drain
outputs. It is intended for use with BusWorks
XT Series discrete I/O and other digital input
modules to monitor contact closures or mains
power supply high/low voltage levels.
Each channel senses the presence or absence
of high-level voltage to determine the status
of proximity switches, limit switches, toggle
switches, push buttons, contacts, and other
devices. Opto-isolators control an open-drain
output to safely interface the status of the
monitored signal.
These modules are very easy to use. Removable
front-facing terminal blocks on the module’s top
and bottom greatly simplify field wiring.
Rugged construction and high density design
combine for a very effective I/O solution. These
units are ideal for remote monitoring, distributed
control, or SCADA applications.
Input Ranges
0-130V rms , 130V DC
Output Ranges
Open-drain: 1K? pull-up to +5.3V DC,
0-32V DC maximum, 150mA sink
Power Requirement
12 to 32V DC (0.4W)
Key Features & Benefits
■ Six high-level voltage input channels
■ Six logic-level output channels
(open-drain, low-side switches)
■ Built-in hysteresis optimized for mains power
at 120V rms
■ Outputs include 1K? pull-ups to +5.3V DC
■ High-density 22.5mm wide package with
pluggable, front-facing terminals
■ 1500V AC isolation (between each input and
power/output) and surge/transient protection
■ Supports bussed/rail and redundant power
■ -40°C to +70°C wide temperature operation
■ Withstands 25g shock and 4g vibration
■ CE and UL/cUL Class 1 Div 2 Zone 2 approvals
6 discrete input/output channels ◆ Senses on/off status of AC/DC voltages ◆ Supports 5-32V logic output
XTA-120V-6 Optocoupler Modules
99.0
(3.90)
114.5
(4.51)
22.5
(0.89)
DIMENSIONS ARE IN
MILLIMETERS (INCHES)
BUCK
CONVERTER
DC+
DC-
12-32V
TB6
4 +
5 -
3
2
1
NC
BUS CONN
NC
NC
40WV
40WV
+5V
INPUT
TERMINALS
TB1 OF TX1
TB2 OF TX2
TB3 OF TX3
OUTPUT
TERMINALS
TB4 OF TX4
PWR
TB6 OF TX6
RTN
TB5 OF TX5
INPUT OUTPUT
HIGH > 90V AC
LOW < 60V AC
5.3V DC (OFF)
0V DC (ON)
BOTTOM VIEW
2 1 3 4
6 5 7 8
10 9 11 12
22 21 23 24
18 17 19 20
14 13 15 16
TOP VIEW
22 21 23 24
18 17 19 20
14 13 15 16 2 1 3 4
6 5 7 8
10 9 11 12
IN1
RTN1
IN2
RTN2
OUT4
OUT3
OUT2
OUT1
IN3
RTN3
IN4
RTN4
RTN
RTN
OUT6
OUT5
RTN
RTN
DC–
DC+
IN5
RTN5
IN6
RTN6
XTA-120V-6 SIMPLIFIED I/O CHANNEL (1 OF 6)
OFF (1)
ON (0)
ACTIVE-LOW OUTPUT
OUTPUT SINKS
LOAD CURRENT
R LIM
SSR
TO LOAD
RTN
+ V
+ V
LAMP
+ V
OUTPUT
RTN
OUTPUT
RTN
OUTPUT
RTN
OUTPUT
POWER CONNECTIONS
LOGICAL OUTPUT SOLID-STATE RELAY COIL/SOLENOID DRIVER LAMP CONTROL
220WV
40K
12.1K
+5V
TTL
30WV
+7V
40K
OUTPUT
+6V AFTER
DIODE DROP
1K
RTN
RTN
V
INPUT
90-130V AC/DC
V
248-295-0880 ■ 248-624-9234 ■  ■ ■ 30765 Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners. Copyright ? Acromag, Inc. 2014. Data subject to change without notice. Printed in USA 7/2014
Ethernet I/O: BusWorks
?  XT Series
XTA-120V-6 Optocoupler Modules
Performance Specifications
■ Input
Input Type
Six individually isolated voltage inputs interface voltage
levels. Built-in hysteresis provides a sensing threshold
for monitoring mains power.
Input Signal Voltage Range
0-130V rms , 130V DC.
Input Signal Threshold
Low-to-High threshold: 90V AC or DC, typical.
High-to-Low threshold: 60V AC (55V DC), typical.
Input Hysteresis
30V DC, typical.
Input Impedance
46K ohms, typical.
Input Over-Voltage Protection
Metal Oxide Varistors (MOV) at every channel input.
Rated Continuous Voltage: 130V rms , 130V DC.
Rated Maximum Clamping Voltage: 340V DC.
Input channels also include capacitive filtering, and
series resistance.
■ Output
Output Type
Six open-drain, mosfet switches with a common
source connection at output return. Low-side (sinking)
switching between load and return for DC voltage and
current-sinking applications only. Output channels are
pulled up to +5.3V with 1K? resistors.
Output “OFF” Voltage Range
0-32V DC maximum.
Output “OFF” Leakage Current
1μA typical, 50μA maximum
(mosfet only, 25°C, 32V DC).
Output Pull-Ups
1K? pull-ups to 5.3V DC.
Output Activation
Input Output
HIGH > 90V AC/DC 5.3V (OFF)
LOW < 60V AC/DC 0V (ON)
Output “ON” Current Range
0 to 150mA DC, continuous, each channel.
Output Rds On Resistance
2.5 ohms, maximum (150mA, 85°C).
Output Response Time
45ms, typical
(measured from input transition to output).
Output Pull-ups
Individual output channels include 1K? pull-ups to
the internal +5.3V DC rail. If a stronger pull-up (lower
resistance) is required, a resistor will have to be wired
externally in parallel with the output channel.
Note: Do not exceed 150mA of drain current per
output channel.
■ Environmental
Operating Temperature
-40 to 70°C (-40 to 158°F).
Storage Temperature
-40 to 85°C (-40 to 185°F).
Relative Humidity
5 to 95% non-condensing.
Power Requirement
12–32V DC SELV (Safety Extra Low Voltage). Current
draw varies with power voltage as follows (current
indicated is with all outputs ON).
Power Supply Current Draw
12V DC 23mA typical, 25mA maximum
15V DC 19mA typical, 21mA maximum
24V DC 13mA typical, 15mA maximum
32V DC 11mA typical, 12mA maximum
Power Supply Effect
Less than ±0.001% of output span effect per volt DC
of supply change.
Isolation
Inputs isolated from each other (channel-to-channel)
and from output/power.
Peak: 1500V AC, ANSI/ISA-82.01-1988.
Continuous: 250V AC, 354V DC.
Shock and Vibration Immunity
Vibration: 4g, per IEC 60068-2-64.
Shock: 25g, per IEC 60068-2-27.
Electromagnetic Compatibility (EMC) Compliance
Radiated Emissions: BS EN 61000-6-4, CISPR 16.
RFI: BS EN 61000-6-2, IEC 61000-4-3.
Conducted RFI: BS EN 61000-6-2, IEC 61000-4-6.
ESD: BS EN 61000-6-2, IEC 61000-4-2.
EFT: BS EN 61000-6-2, IEC 61000-4-4.
Surge Immunity: BS EN 61000-6-2, IEC 61000-4-5.
Approvals
CE compliant. UL/cUL Class I; Div. 2 Zone 2..
■ Physical
General
General purpose plastic enclosure for mounting on
35mm “T-type” DIN rail.
Case Material
Self-extinguishing polyamide, UL94 V-0 rated, color
light gray. General purpose NEMA Type 1 enclosure.
Circuit Board
Military grade fire-retardant epoxy glass per IPC-
4101/98 with humi-seal conformal coating.
I/O Connectors
Removable plug-in type terminal blocks rated for
12A/250V; AWG #26-12, stranded/solid copper wire.
Dimensions
Width = 22.5mm (0.9 inches), Length = 114.5mm
(4.51 inches), Depth = 99.0mm (3.90 inches).
Shipping Weight
0.5 pounds (0.22 Kg) packed.
Ordering Information
◆ Models
XTA-120V-6
6-channel 120V AC/DC discrete input module with
open-drain outputs.
◆ Accessories
XTBUS-KIT
DIN rail bus power/excitation connector kit. Includes
one DIN rail bus connector (1005-070), one left-side
female connector terminal block (1005-220) and one
right side male connector terminal block (1005-221).
248-295-0880 ■ 248-624-9234 ■  ■ ■ 30765 Wixom Rd, Wixom, MI 48393 USA
Accessories
Bulletin #8400-791
Description
This compact, industrial-grade isolator provides
a high-voltage isolation barrier between a
computer and a connected USB device. The
isolation protects equipment from electrical
surges and transient voltage spikes. It also
eliminates ground loop currents flowing between
the PC and peripherals which can cause damage
and inaccurate measurements. Additionally,
isolation minimizes conducted noise from static
discharge, magnetic fields, and radio frequency
interference.
Acromag’s USB isolator is very easy to use. The
isolator inserts in-line with the USB connection
and operates transparently. No special software
drivers are required. The unit receives power from
the PC’s USB port and isolates that power to the
connected device. High noise immunity and low
radiated emissions ensure reliable data transfer in
sensitive applications.
A number of high-performance features help
provide convenient and dependable operation.
The green LED indicates that power is being
received and blinks if the connected device draws
too much current. An internal jumper lets you
switch from Full Speed (12 Mbps) to Low Speed
(1.5 Mbps) communication. The reset button
offers a simple way to reinitialize a connected
device without breaking the cable connection.
High-retention USB sockets keep cables securely
attached under shock and vibration.
Key Features & Benefits
■ Isolates and protects a USB peripheral from a
USB host
■ Electrical isolation up to 1500V AC / 2100V DC
■ Common mode filtering on all data lines
■ Built-in surge/transient suppression up to 8kV
on all ports
■ Self-powered through the USB port
■ Supports USB 2.0 full speed (12 Mbps) and
USB 1.1 low speed (1.5 Mbps) data rates with
jumper-selection
■ LED for power indication and diagnostics
■ Reset button to reinitialize and re-enumerate
peripheral devices
■ Output short circuit protection with auto-retry
■ No software or configuration required
(transparent operation)
■ Uses standard high-retention USB Type A/B
cable connections (includes 1m cable)
■ Compact size and rugged design for harsh
environments
■ Wide ambient temperature operation
-40 to 70°C (-40 to 158°F)
■ CE, FCC, UL/cUL approvals
Ordering Information
Models
USB-ISOLATOR
USB isolator, includes USB cable (Part # 4001-112) for
isolator-to-PC connection
XT-SIP
CD-ROM (Part #5041-094), USB isolator, two USB
cables (Part # 4001-112, 4001-113),and one Ethernet
cable (Part # 5035-360) for configuration of Acromag
BusWorks XT Series Ethernet modules.
Accessories
4001-112
USB cable, 1 meter, with Type A to Type B plugs
4001-113
USB cable, 1 meter, with Type A to Mini-B plugs
5035-360
Ethernet crossover cable, 5 feet, Single-shielded
category 5e STP cable with a drain wire and an RJ45
plug at each end.
USB-powered, USB 2.0 and 1.1 compatible ◆ 1500V AC / 2100V DC isolation ◆ No drivers required
USB-ISOLATOR USB-to-USB Isolator
DEVICE
CONNECT
PC
CONNECT
POWER
RESET
CONNECTION
MODEL: USB-ISOLATOR
1.85” (46.99mm)
0.93” (23.50mm) 2.40” (60.96mm)
2 1
3 4
3 4 1 2
USB
TYPE B
USB
TYPE A
LEFT SIDE TOP VIEW RIGHT SIDE
248-295-0880 ■ 248-624-9234 ■  ■ ■ 30765 Wixom Rd, Wixom, MI 48393 USA
All trademarks are property of their respective owners. Copyright ? Acromag, Inc. 2013. Data subject to change without notice. Printed in USA 12/2013
Accessories
USB-ISOLATOR USB-to-USB Isolator
Performance Specifications
■ USB Port Interface
Standards
USB 1.1 and 2.0 compatible, full speed (12Mbps,
default) and low speed (1.5Mbps) data rates
supported. For low speed data rates, an internal
jumper is provided for user setting. Connection is
transparent, no software or configuration is required.
Isolator will not be enumerated in the device manager.
■ Physical
Dimensions
2.40” Length x 1.85” Wide x 0.925” High
(60.96mm x 46.99mm x 23.495mm).
Connectors
Standard high retention USB A/B connectors with
minimum withdrawal force of 15 Newtons. 1 meter
A/B cable included.
PC Connector
USB Type B receptacle
Device Connector
USB Type A receptacle
LED Indicator
Green LED indicates isolator receiving 5V power from
the USB computer bus. Flashing indicates short circuit/
retries on peripheral side.
Reset Button
Resets the connection to the USB peripheral device for
reinitialization and re-enumeration.
Enclosure Material
ABS Resin, UL94 rated, IP30 plastic case.
■ Environmental
Operating temperature
-40 to 70°C (-40° to 158°F).
Storage temperature
-40 to 85°C (-40 to 185°F).
Relative humidity
5 to 95% non-condensing.
Power
PC Connect Side: Standard USB bus power (5V DC).
Device Connect Side: 5V DC / 120mA with full power
connection from PC. Includes over-current protection
with auto-retry.
Isolation
1500V AC / 2100V DC peak isolation.
250V AC continuous safety isolation.
Agency Approvals:
CE and FCC compliant. UL/cUL Class 1 Div. 2 Zone 2.
Radiated Field Immunity (RFI)
Designed to comply with IEC1000-4-3 Level 3 and
EN50082-1.
Electromagnetic Compatibility (EMC)
Minimum immunity per EN61000-6-2:2001
Electrostatic Discharge (ESD) Immunity
Per IEC61000-4-2.
Radiated Field Immunity (RFI)
Per IEC61000-4-3.
Electrical Fast Transient Immunity (EFT)
Per IEC61000-4-4. Complies with IEC1000-4-4 Level 3
and EN50082-1.
Surge Immunity
Complies with IEC1000-4-5 Level 3 and EN50082-1.
Per IEC61000-4-5.
Conducted RF Immunity (CRFI)
Per IEC61000-4-6.
Emissions
Per EN61000-6-4:2001.
Radiated Frequency Emissions
Per CISPR11 Class A. Meets or exceeds EN50081-1 for
Class B equipment.
PERSONAL COMPUTER
RUNNING WINDOWS OS
1 METER CABLE
USB-A MALE
TO HOST USB PORT HOST
USB
HOST USB SERIAL
PORT CONNECTOR
AT BACK OF PC
CONFIGURATION
SOFTWARE
ACROMAG
HOST PC RUNNING
USB-B MALE
DEVICE
CONNECT
PC
CONNECT
POWER
RESET
CONNECTION
Acromag
THE LEADER IN INDUSTRIAL I/O
R
USB-A MALE
USB-ISOLATOR
USB MiniB Socket
(Front-Panel of Module)
ANY XT MODULE
USB MiniB MALE
XT SERIES USB MODULE CONNECTIONS
LED
USED FOR CONFIGURATION ONLY IN A SAFE OR ORDINARY LOCATION
CABLE Model 4001-113
CABLE Model 4001-112
BUSWORKS
XT
USB
RUN
STAT
Rugged and reliable
Ethernet I/O modules
are ready for your
most challenging
monitoring & control
applications.
EtherStax I/O Blocks
EtherStax I/O blocks provide a rugged,
high-density solution to interface many
analog or discrete signals to your control
system. Modbus TCP/UDP/IP support
enables reliable host data transfer or
peer-to-peer communication. Web-based
configuration simplifies setup with any
web browser. For OEM systems requiring
special mounting, enclosureless versions
are available. EtherStax are ideal for a
broad range of monitoring and control
or SCADA applications.
Rugged, Industrial-Grade Design
EtherStax are designed for high-reliability
operation in hostile environments. Units
are shock/vibration-resistant and feature
3-way isolation with surge protection.
I/O circuitry has over-temperature, over-
voltage, and over-current protection.
Redundant Power & Communication
Self-healing, redundant communication
paths support dual copper or fiber-optic
media. Dual DC power connections
for battery backup ensure dependable
operation. If host communication is lost,
outputs fail safely and a relay provides
local alarming or shutdown functions.
Stackable, High-Density I/O
Get up to 96 channels on a single unit
to monitor sensors, control devices, or
add local alarms. Aluminum enclosures
interlock for secure stacking that saves
space mounting on a surface or rail.
i2o peer-to-peer communication
Input channels on one unit can write
directly to outputs on another unit
without a host controller in between.
Inputs
? Analog current/voltage
? 8B signal conditioning modules
? Discrete level (on/off, open/close, hi/lo)
Outputs
? Discrete switches and relays
Power
? 18-36V DC
Communication
? Modbus TCP/UDP/IP, i2o peer-to-peer
Software Support
? Modbus C library
Approvals
? CE, UL/cUL Class I Div 2
? Modbus TCP/IP conformance
For more information, visit our website at
www.acromag。。ｃｏｍ/EtherStax
4
Call 877-214-6267 or 248-295-0880 for technical assistance.
ETHERNET I/O: HIGH-DENSITY
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
– 4 –
EtherStax ES2000 Series
Rugged, Stackable Ethernet I/O
EtherStax I/O blocks provide a ruggedized, high-
density solution to interface many analog and
discrete signals to your control system.A stackable
aluminum housing maintains a small footprint and
stands up to industrial environments. The Ethernet
interface supports Modbus TCP/UDP/IP for reliable
host data transfer or peer-to-peer communication.
Web-based configuration simplifies setup with
any web browser. For OEM systems, or those that
require specialized housings, an open-board version
without the enclosure is available. EtherStax are
ideal for a broad range of measurement and control
applications.
Rugged, Industrial-Grade Design
EtherStax are designed for high-reliability operation.
Units feature 3-way isolation and surge protection.
The I/O circuitry has over-temperature, over-
voltage, and over-current protection. Redundant
communication paths and DC power ensure
dependable operation. If network communication
is lost, outputs fail safely and a relay provides local
alarming or shutdown functions.
Stackable, High-Density I/O
A variety of models offer a mix of analog and
discrete I/O interfaces with up to 96 channels on a
single unit. Monitor sensors, control devices, or add
local alarms. The units interlock for secure stacking
that consumes little space when mounted on a
surface or DIN rail. .
Key Features & Benefits
■ High-density industrial Ethernet I/O:
Put hundreds of I/O channels in less panel space.
■ Stackable aluminum or open-board packaging:
Choose industrial-strength or low-cost mounting.
■ Rugged, shock and vibration-resistant design:
Mounts on machinery, DIN rail, wall, or flat surface.
■ Modbus TCP/UDP/IP or i2o peer-to-peer network:
Reliable communication to host or between nodes.
■ Easy web configuration with copy function:
Quickly set up units with any web browser.
■ Dual-port Ethernet hub or switch w/MDI/MDI-X:
Get diagnostics, redundancy, and easy expansion.
■ Ready for STP, RSTP, other redundancy schemes:
Supports dual-path communication via copper and
fiber.
■ Local failsafe SPST 5A fault relay:
Provides alarm/shutdown if network or power fails.
■ Surge suppression and 1500Vrms isolation:
Protects power, relay, I/O, and each Ethernet Port.
■ Redundant DC power w/internal diode coupling:
For “bump-less” transfer to back-up power.
■ Extended operating temperature of -40 to 70°C
■ Designed for CE and UL/cUL Class1 Div 2 ABCD
ES2000 Series Rugged, High-Density Ethernet I/O
Ethernet I/O: EtherStax ? Series
P2
P5
P8
1
1
2
2
RST
RST
DFT
R
E1
E1
R
0
8
8
0
2
10
10
2
3
11
11
3
5
13
13
5
6
14
14
6
R
R
16
24
24
16
19
27
TS2
27
19
TS2
22
30
30
22
32
40
40
32
35
43
TS3
43
35
TS3
38
46
46
38
P1
P3
P4
P6
P7
R.M.
1 2
DFT
RST
DFT
R
E1
0
8
2
10
3
11
5
13
6
14
R 16
24
19
TS2
27
22
30
32
40
35
TS3
43
38
46
P7
P8
RESET
RX
FAULT
PWR2
RX
R.M.
PORT 2
PORT 2
COM
STATUS
1 4
9 12
TS1
9 12
1 4
TS1
717
15 E2 25
15 E2 25
717
18212023
26292831
26292831
18212023
R 34 33 36
E342 41 44
E342 41 44
R 34 33 36
37 39
45 47
45 47
37 39
P1
P3
P5
FDX/
COL
P2
P4
P6
TX
LNK/
ACT
PWR1
PWR TX
PORT 2
COM
STATUS
COM
STATUS
1 4
TS1
9 12
717
15 E2 25
18212023
26292831
R 34 33 36
E342 41 44
37 39
45 47
EIS-408FX-M
PORT 1
ETHERNET 10/100M
PORT 1
ETHERNET 10/100M
ETHERNET 10/100M
PORT 1
Acromag
Acromag
Acromag
To NIC
Acromag
Connect one unit
per switch port
Recommended Connections
(switched Ethernet)
Optional Connections
(two cascaded nodes)
Use an Ethernet switch
to distribute nodes
Remote host
w/ NIC installed
To NIC
Remote host
w/ NIC installed
1 2
1 2
0
8
8
0
1
9
9
1
3
11
11
3
4
12
12
4
6
14
14
6
7
15
15
7
17
25
25
17
20
28
28
20
23
31
31
23
R
R
33
41
41
33
36
44
44
36
39
47
47
39
1 2
0
8
1
9
3
11
4
12
6
14
7
15
17
25
20
28
23
31
R 33
41
36
44
39
47
PORT 1
PORT 1
R
E1
RST
E1
R
RST
DFT
25
10 13
TS1
10 13
25
TS1
R 1619 18
2427 E2 26
TS2
2427 E2 26
R 1619 18
TS2
22 32 21
30 40 29 E3
30 40 29 E3
22 32 21
35 3834 37
43 4642 45
TS3
43 4642 45
35 3834 37
TS3
PORT 1
DFT
R
RST
DFT
E1
25
TS1
10 13
R 1619 18
TS2
2427 E2 26
22 32 21
30 40 29 E3
35 3834 37
TS3
43 4642 45
PORT 2
ETHERNET 10/100M
PORT 2
ETHERNET
ETHERNET 10/100M
COM
STATUS
PORT 2
Acromag
COM
STATUS
A ag
COM
STATUS
Acromag
- PC with HMI
- Controller
- PLC or DCS
- Peer-to-Peer
Optional fiber-optic
Cascade
Port 2 to
Port 1
Cascade
Port 2 to
Port 1
Connect to Port 1
Units are auto-crossing
and do not require a
cross-over cable when
making copper network
connections
Front
Back
Stacked
Open
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
ES2000 Series Rugged, High-Density Ethernet I/O
Ethernet I/O: EtherStax ? Series
Features
Dual Ethernet ports
Two Cu or one Cu / one fiber
Earth ground terminal
One on each side
Port status LEDs
Indicate switch/hub mode, link, activ-
ity, 10/100Mbps, port faults
Default/Reset toggle switch
Restore communication to factory con-
figuration or reset the unit.
High-density industrial I/O
Up to 96 channels per unit
with pluggable terminal blocks.
High-strength
aluminum packaging
Dove-tailed grooves on top
for stacking and interlock-
ing units
Locking Ethernet connection
RJ45 clip frame provides secure media
connections resistant to shock and vibra-
tion when used
with compatible cables.
Redundant DC Power
Pluggable terminals
Status LEDs
Power, I/O, relay status
Fault relay
Local 5A Form A relay
Network and I/O Configuration Screens
Front View
Rear View
8.226” Width
7.25” Depth
2.444” Height
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
– –
Ethernet I/O: EtherStax ? Series
Easy Peer-to-Peer Communication with Acromag i2o ?
i2o input-to-output messaging
Acromag’s i2o technology is the easy
way to transmit input values for
remote output without a PLC, PC or
master CPU.
With i2o, many Ethernet I/O modules have the
ability to operate like a long-distance transmitter.
You can convert your sensor inputs at Point
A to process control signals at Point B. Or,
you can monitor discrete devices at one site
by reproducing the discrete levels with a relay
output at another location.
Use your existing Ethernet lines
to save time and wiring expenses
Connect input modules to output modules using
your existing copper/fiber infrastructure or with
a single new cable. Multiple I/O modules can be
multiplexed through a switch or wireless radios.
No complicated controllers.
No software. No programming.
Acromag Ethernet I/O modules have a built-in
web page making it simple to configure using
your standard web browser. Just click a few
menu settings, enter the IP addresses, and you
are done. Fast and easy.
BusWorks 900EN Series I/O Modules
Up to 12 channels per module and
reliable, failsafe communication
Monitor up to a dozen devices with a single pair
of I/O modules. Discrete I/O modules have twelve
channels that you can set up as inputs or as
outputs in four-channel groups. This allows
bi-directional communication between two
modules. Analog input modules measure up to
six current, voltage, thermocouple, or RTD
sensor signals. This data is then transmitted to a
six-channel analog output module providing DC
current or voltage output signals.
Wire-saving applications
Our i2o technology lets an input module speak
directly to an output module. It is ideal for non-
critical projects that don’t need a PLC or PC
master. Reproduce remote signals based on
timed or event updates.
■ Remote monitoring of process variables
(temperature, pressure, level, flow)
and discrete devices
■ Remote data display, recording, alarms,
or control
■ Signal splitters
■ Analyzer system monitoring
■ Power and water utility monitoring
■ Tank level, pump, and valve control
■ Remote monitoring of motor loads and
contactor status
■ Remote control switching stations
■ Environmental control systems
■ Process shutdown, alarming, and
annunciator systems
■ RFID systems
Analog
Peer-to-Peer Communication
Inputs
Input-to-Output
input channel writes
to the output channel
(uni-directional or bi-directional communication)
4-20mA,
0-10V DC,
thermocouple,
RTD/resistance
Discrete
Inputs
on/off,
high/low,
open/close,
momentary
push-buttons
Analog
Outputs
proportional
4-20mA or
0-10V DC
Discrete
Outputs
on/off,
high/low,
open/close
Any Ethernet Media
Copper, fiber,
wireless, or Internet
EtherStax I/O ? also supports i2o
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: EtherStax ? Series
– 9 –
Acromag i2o ? Technology for Peer-to-Peer Communication
ES2000 Series
Units with i2o
◆ Analog Input Modules
ES2153
16 analog current inputs,
16 analog voltage or 8B inputs
◆ Analog Output Modules
ES2171
16 current outputs
ES2172
16 voltage outputs
◆ Analog I/O Modules
ES2151
16 analog current inputs,
16 analog voltage or 8B inputs,
16 analog current outputs
ES2152
16 analog current inputs,
16 analog voltage or 8B inputs,
16 analog voltage or 8B outputs
◆ Discrete I/O Modules
ES2113
96 solid-state input/outputs
ES2117
32 solid-state inputs
16 relay outputs
Analog I/O module (ES2152) configuration screen
Unit
A
Unit
B
Chan
1-16
Chan
17-32
Chan
33-48
Chan
49-65
Chan
66-81
Chan
82-96
Unit
A
Chan
1-16
P1
P2
P4
P5
P7
P8
P3
P6
R.M.
P5
P7
P8
P6
RXRESET
FAULT
PWR2
RX
R.M.
TXPWR
P1
P3
FDX/
COL
P2
P4
TX
PWR1
LNK/
ACT
EIS-408FX-M
Acromag
Chan
1-16
Chan
1-16
Unit
B
Unit
C
Chan
49-65
Chan
66-81
Chan
82-96
Chan
1-16
Chan
17-32
Chan
33-48
Installation #1: Peer-to-Peer Bi-directional Communication
NOTE: Buy modules
in pairs. For example:
AI with AO
AIO with AIO
DIO with DIO
Installation #2: Peer-to-Peer Signal Splitter (dual outputs)
Copper,
Fiber, or
Wireless
Network
Current, voltage, 8B
or discrete inputs
Current, voltage, 8B,
or discrete outputs
Any
Ethernet
Media
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: EtherStax ? Series
– 10 –
3 ports
x
16 DIO
3 ports
x
16 DIO
Dual Power
Alarm Relay
PC w/HMI
PLC / DCS
Controller
Peer-to-Peer
Dual Ethernet Ports
10/100 Base-TX and
100 Base-FX
Fiber-optic (optional) Simplified I/O Circuit (one channel)
ES2113 with 96 Discrete I/O
N.O.
96 bi-directional discrete I/O channels ◆ Modbus TCP/IP, i20 peer-to-peer communication
ES2113 Ethernet Discrete I/O Modules
Description
EtherStax I/O blocks provide a ruggedized, high-
density solution to interface a very large quantity
of discrete I/O signals to your control system. A
stackable aluminum housing maintains a small
footprint and stands up to harsh, industrial envi-
ronments. Web-based configuration simplifies
setup with any web browser.
Input Ranges
0 to 28V DC, active-low inputs
Output Range
0 to 28V DC (0.5A/ch) low-side switches
Ethernet Communication
10/100Base-T(X) and 100Base-FX
Modbus TCP/IP or UDP/IP protocol
Acromag i2o? peer-to-peer technology
Power Requirement
18 to 36V DC (redundancy-ready)
Approvals
CE, UL, & cUL listed
Class 1; Division 2; Groups A, B, C, D.
■ 96 discrete I/O channels:
Bi-directional channels support any
input/output mix in a single unit.
■ High-density stackable unit:
Stacked mounting puts a lot of I/O in a very
small footprint to save panel space.
■ High Speed Channel Updates:
Updates all 96 channels in 1mS.
■ Modbus TCP/IP or UDP/IP protocol:
I/O functions as slave to host controller.
■ Peer-to-peer i2o communication:
Inputs to one unit automatically update out-
puts on another over Ethernet link.
■ Change-of-state or timed updates:
Event-driven updates transmit data in less than
5mS between peers with i2o.
■ 10 Modbus TCP/IP sockets/sessions:
Multiple masters can talk to an EtherStax unit
at the same time.
■ Self-test checks I/O operation:
Test I/O channels from a web browser before
wiring terminals to devices.
■ Selectable input “wetting” current:
Internal current source eliminates pull-ups and
improves dry contact interface.
■ Automatic change of state detection:
Inputs detect quick momentary changes of
state that occur between polling.
■ Internal or external port excitation:
Selectable source on each 16-channel port
simplifies wiring and adds flexibility for use
with 5-28V DC logic.
■ Loop-back monitoring on all channels:
Inputs confirm output states for increased
system reliability.
■ Watchdog timers and failsafe outputs:
Communication fault sends output to a pre-
defined state or holds the last value.
■ Output open-load detection:
Output fault detection is selectable on indi-
vidual channels.
■ Thermal, current, voltage protection:
I/O is protected from excessive levels to reduce
downtime.
Open circuit board versions also available.
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: EtherStax ? Series
– 11 –
Performance Specifications
◆ General Specifications
See Page 7 for communication and other specs.
◆ Inputs
Configuration (active-low inputs)
96 channels (six 16-ch ports) with a common return
(RTN). Each input is connected in tandem with open-
drains of output mosfets. Any mix of I/O occurs as all
channels are high impedance inputs unless written.
Output channels can be read back at any time (loop-
back monitoring).
Input Signal Voltage Range
0 to 28VDC, 31V maximum. Surge protected.
Input Threshold Detection and Sensitivity
4V DC threshold. Level or latching inputs.
Input “Wetting” Current
Built-in current sources switch from 16mA
initially (20ms) to 2mA (continuous), default mode.
Sources can be changed to 2mA or turned off.
Excitation
Internal (default): 6V DC, 400mA.
External: 6 to 28V DC typical. Separate excitation
terminal (logic) for each 16-channel port. Internal and
external supplies are diode-blocked from each other.
Includes reverse polarity protection.
Peer-to-peer (i2o) communication
Change-of-state updates: Less than 5mS events.
Timed updates: Configurable for 1-90 seconds.
◆ Outputs
Configuration (low-side switches)
96 channels (six 16-ch ports) of open-drain mosfet
switches with co h output is con-
nected in tandem with buffered inputs.
Output “OFF” Voltage Range
0 to 28V DC, 31V maximum. Surge protected.
Output “ON” Current Range
0 to 300mA DC continuous, each output.
Output “ON” Maximum Current
450mA DC maximum with any 8 channels “on”
continuously per 16 channel port
Output Port Maximum Current
4.8A: 16 channels @ 300mA continuous
3.6A: 8 channels “off” & 8 channels @ 450mA
◆ Local Alarm Output
Configuration
Isolated relay de-energizes (failsafe) or energizes
(non-failsafe) as configured when the watchdog timer
detects a media or communication failure.
Type
SPST-NO, 1 Form A, Class I, Division II approved.
Rating
5A @ 24VDC/250VAC, 6000 cycles resistive.
3A @ 24VDC/250VAC, 100,000 cycles general.
2A @ 24VDC/250V AC, Hazardous locations
Maximum Switching Voltage
250VAC, 125VDC.
◆ Enclosure and Physical
Housing Classification and Dimensions
IP20: 8.226” x 2.444” x 7.25”.
4 lbs. (1.8 kg) packed (unit weighs 3.4 lbs).
Without enclosure: 7.920” x 1.875” x 7.25”.
1.65 lbs. (0.75 kg) packed (unit weighs 1.05 lbs).
Safety Approvals
CE marked and UL/cUL Listed.
Hazardous Locations: Class 1; Div. 2; A B C D.
Open board units: UL Recognized
Shock and Vibration Immunity
Rating for single surface-mount unit in enclosure.
Mechanical Shock: 50g, 3ms, with 3 half-sine shock
pulses in each direction along 3 axes
(18 shocks), and 30g, 11ms, with 3 half-sine shock
pulses in each direction along 3 axes
(18 shocks), per IEC60068-2-27.
Random Vibration: 5g, 5-500Hz, in 3 axes at
2 hours/axis per IEC60068-2-64.
◆ Environmental
Operating and Storage Temperature
Operating: Open bd,-40 to 75°C(-40 to +167°F)
Enclosed bd, -40 to 75°C (all outputs “off”)
-40 to 70°C (all outputs “on” at rated Max.).
Storage: -40 to +85°C (-40 to +185°F).
Power Requirements
18-36V DC. Redundant, diode-coupled terminals.
Dual copper ports: 2.5W with external
excitation, 3.5W with internal excitation.
Fiber optic units: Call factory.
Isolation
I/O, power, relay and Ethernet port-to-port.
Peak: 1500V AC, ANSI/ISA-82.01-1988.
Continuous: 250V AC, 354V DC.
◆ Ethernet Interface
Internal Switch or Hub/Repeater
Dual-port Ethernet switch. Web-configurable as a true
switch (default mode) or hub.
Network Connector [10/100 Base-T(X)Copper]
One or two 8-pin RJ-45 connectors. Automatic MDI/
MDI-X. 100m communication distance.
Network Connector (100 Base-FX Fiber-optic)
One multi-mode with SC connector. 2km communica-
tion distance. Full/half-duplex, selectable.
Protocols and Addressing
Modbus TCP/IP or UDP/IP. i2o peer-to-peer.
StaticIP, DHCP, BootP. Configurable IP addresses.
Ethernet Modbus TCP/IP Sockets/Sessions
1-10 socket/sessions programmable via web page.
Ethernet Redundancy
Compatible with STP, RSTP, proprietary schemes.
Ordering Information
◆ I/O Modules
ES2113-0000
96 DIO, two copper ports, IP20 enclosure
ES2113-0010
96 DIO, two copper ports, open circuit board
ES2113-1000
96 DIO, one Cu & one fiber port, IP20 enclosure
ES2113-1010
96 DIO, one Cu & one fiber port, open board
◆ Accessories
Industrial Ethernet Switches
See Page 33.
Hardware Accessories and Power Supplies
See Page 34.
Software Support
See Page 36.
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: EtherStax ? Series
– 12 –
Description
EtherStax I/O blocks provide a ruggedized, high-
density solution to interface a large quantity of
isolated discrete I/O signals to your control sys-
tem. A stackable aluminum housing maintains a
small footprint and stands up to harsh, industrial
environments. Web-based configuration simpli-
fies setup with any web browser.
Input Range
20-36V DC
Output Range
Outputs: 2A @ 250V AC or 110V DC SPST
Alarm: 2A @ 240V AC or 125V DC SPST
Ethernet Communication
10/100Base-T(X) and 100Base-FX
Modbus TCP/IP or UDP/IP protocol
Acromag i2o? peer-to-peer technology
Power Requirement
18 to 36V DC (redundancy-ready)
Approvals
CE, UL, & cUL listed:
Class 1; Division 2; Groups A, B, C, D.
■ Fully isolated between all circuits:
Inputs, outputs, alarm, network ports,
enclosure, and power are isolated from
each other for safety and noise immunity.
■ High-density stackable unit:
Stacked mounting puts a lot of I/O in a very
small footprint to save panel space.
■ Modbus TCP/IP or UDP/IP protocol:
I/O functions as slave to host controller.
■ Peer-to-peer i2o communication:
Inputs to one unit automatically actuate
outputs on another over Ethernet link.
■ Channel-to channel input isolation:
Inputs provide high or low-side sensing for
AC or DC circuits.
■ Automatic change of state detection:
Inputs detect quick momentary changes of
state that occur between polling.
■ Logic inversion (i2o only):
Active high inputs can switch remote
peer-to-peer outputs on or off.
■ Change-of-state or timed updates:
Event-driven updates transmit data in less than
10ms between peers with i2o.
■ 10 Modbus TCP/IP sockets/sessions:
Multiple masters can talk to unit at same time.
■ Local alarm function:
Dedicated failsafe relay is controlled via
watchdog timer and link-loss conditions.
■ Heavy-duty 2A relays:
16 SPST outputs provide high/low-side 2A
switching up to 250V AC or 110VDC
■ Programmable outputs:
Normally open relays are configurable to
energize or de-energize on power-up.
■ Built-in slave relays:
Inputs can control outputs on same unit to
provide slave relay interface.
■ Self-test checks I/O operation:
Unit checks internal I/O communication and
allows verification via web browser.
■ Watchdog timers:
Communication fault sends output to a
pre-defined state or holds the last value.
48 Channel-Isolated Discrete I/O (32 DC inputs, 16 AC/DC outputs) ◆ Modbus TCP/IP, i20 peer-to-peer
Optocoupler
Inputs 0-15
Mech Relay
Outputs 0-7
Optocoupler
Inputs 0-15
Mech Relay
Outputs 0-7
Optocoupler
Inputs 16-31
Mech Relay
Outputs 8-15
Dual Power
Alarm Relay
PC w/HMI
PLC / DCS
Controller
Peer-to-Peer
Dual Ethernet Ports
10/100 Base-TX and
100 Base-FX
Fiber-optic (optional)
Simplified Input Circuit (one channel)
Simplified Output Circuit (one channel)
ES2117 with 48 Discrete I/O
N.O.
SPST-NO
CPU
+3.3V
Optical
Isolation
+
–
A
B
DC
Load
ES2117 Ethernet Discrete I/O Modules
Open circuit board versions also available.
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: EtherStax ? Series
– 13 –
Performance Specifications
◆ General Specifications
See Page 7 for communication and other specs.
◆ Inputs
Configuration
32 individually isolated, buffered inputs grouped in
two 16-ch ports. Active-high operation.
Input Voltage Range
20-32V DC, 36V DC max.
Max voltage/operating temperature:
36V DC @ 65°C max.
Input Signal Threshold and Hysteresis
OFF-ON: 13V min, 20V max, 16V DC typical.
ON-OFF: 11V max, 7V min, 9V DC typical.
Input Impedance
6k ohms
Input Isolation:
Channel-to-channel: 150V AC isolation rating.
Port-to-port: 250V AC safety isolation rating.
Input Response Time
Less than 5ms.
Peer-to-peer (i2o) communication
Change-of-state updates: Less than 10ms events.
Timed updates: Configurable for 1-90 seconds.
◆ Outputs
Configuration
One 16-ch port of isolated SPST-NO mech. relays.
Maximum Switching Voltage / Load Rating
250V AC, 110V DC @ 2A.
Mechanical Life
20 million operations minimum.
Electrical Life (@ 20 cycles per minute)
100k operations minimum at 2A.
Contact Resistance (Initial)
30 milliohms, maximum.
Output Response Time
Less than 5ms.
Minimum Load
100μA/100mV DC.
◆ Local Alarm Output
Configuration
Failsafe or non-failsafe (software-configurable) relay
trips on power or link-loss failure.
Type
SPST-NO, 1 Form A, Class I, Division II approved.
Maximum Switching Voltage/Load Rating
240V AC, 125V DC @ 2A
100K operations minimum.
◆ Ethernet Interface
Internal Switch or Hub/Repeater
Dual-port Ethernet switch. Web-configurable as a true
switch (default mode) or low-latency hub.
Network Connector [10/100 Base-T(X)Copper]
One or two 8-pin RJ-45 connectors. Automatic MDI/
MDI-X. 100m communication distance.
Network Connector (100 Base-FX Fiber-optic)
One multi-mode with SC connector. 2km communica-
tion distance. Full/half-duplex, selectable.
Protocols and Addressing
Modbus TCP/IP or UDP/IP. i2o peer-to-peer.
StaticIP, DHCP, BootP. Configurable IP addresses.
Ethernet Modbus TCP/IP Sockets/Sessions
1-10 socket/sessions programmable via web page.
Ethernet Redundancy
Compatible with STP, RSTP, proprietary schemes.
◆ Environmental
Operating and Storage Temperature*
Operating: -40 to 65°C
Storage: -40 to 85°C (-40 to 185°F).
Power Requirements
18-36V DC. Redundant, diode-coupled terminals.
4.7W (copper ports), 6.0W (fiber-optic ports).
Isolation
I/O, power, relay and Ethernet port-to-port.
Peak: 1500V AC, ANSI/ISA-82.01-1988.
Continuous: 250V AC, 354V DC (150V AC ch-ch).
See User Manual for full temperature specs.
◆ Enclosure and Physical
Housing Classification and Dimensions
IP20: 8.226” x 2.444” x 7.25”, 4 lbs. packed.
PCB: 7.920” x 1.875” x 7.25”, 1.65 lbs. packed.
Safety Approvals (pending)
CE marked and UL/cUL Listed.
Hazardous Locations: Class I; Div 2; A, B, C, D.
Open board units: UL Recognized.
Shock and Vibration Immunity (in enclosure)
Mechanical Shock: 50g (3ms), 30g (11ms).
Random Vibration: 5g, (5-500Hz).
Ordering Information
◆ EtherStax I/O Units
All units have 32 inputs,16 AC/DC outputs and i20
peer-to-peer communication capability.
ES2117-0000
20-36V DC inputs, two Cu ports, IP20 enclosure
ES2117-0010
20-36V DC inputs, two Cu ports, open board
ES2117-1000
20-36V DC inputs, Cu & fiber ports, IP20
ES2117-1010
20-36V DC inputs, Cu & fiber ports, open board
◆ Accessories
Industrial Ethernet Switches
See Page 33.
Hardware Accessories and Power Supplies
See Page 34.
Software Support
See Page 36.
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: EtherStax ? Series
– 14 –
ES2151 Ethernet Analog Input/Output Modules
Description
These EtherStax I/O units provide a rugged, high-
density, and high-speed solution to interface
a large quantity of analog input signals. Units
accept 16 single-ended analog voltage inputs
and 16 single-ended current inputs. The ES2151
also provides 16 analog current outputs. Two
DB25 ports support an alternate interface of
voltage I/O from 8B input or output modules.
This combination of high-density analog inputs
and outputs is ideal for many sensor interface
applications in remote zones.
EtherStax units are built and tested for high reli-
ability and dependable performance in hostile
environments. Available in an aluminum enclo-
sure or as an open circuit board, both formats
stack vertically to maintain a very small footprint.
Input Ranges
±5V, ±10V, ±20mA, 0-20mA, 4-20mA DC
Output Ranges
0-20mA, 4-20mA DC
Ethernet Communication
10/100Base-T(X) and 100Base-FX,
Automatic MDI/MDI-X on all copper ports,
Modbus TCP/IP or UDP/IP protocol
i2o peer-to-peer
Power Requirement
18 to 36V DC (redundancy-ready)
Approvals
CE, UL/cUL:
Zone 2, Class 1, Division 2, Groups ABCD
Key Features & Benefits
■ 48-channel high-density combination of
analog inputs and outputs
■ DB25 ports for alternate voltage I/O from 8B
signal conditioning backpanels
■ 4-way isolation and surge suppression
■ High-resolution 16-bit A/D and D/A’s
■ High-speed scanning for 10 millisecond update
of all 48 channels
■ Automatic zero/span calibration
■ Built-in loop-back circuit verifies outputs
■ On-demand self-test verifies calibration
■ Web browser configuration
■ User-configurable sample averaging and
integration/totalization function with
non-volatile registers
■ Dual-format data registers support
16-bit integers or 32-bit floating point
■ Scaling registers on all channels
■ Peer-to-peer i2o communication with
percent-of-span and timed updates
32 analog current/voltage inputs ◆ 16 analog current outputs ◆ Modbus TCP/UDP, i2o communication
Dual Power
Alarm Relay
PC w/HMI
PLC / DCS
Controller
Peer-to-Peer
Dual Ethernet Ports
10/100 Base-TX
and 100 Base-FX
Fiber-optic (optional)
N.O.
Current Output
8 Channels
Current Output
8 Channels
8B Interface
Voltage Input
16 Channels
DB25 ports connect to
new 8B or legacy 7B
signal conditioners
ES2151
16 Current In
16 Voltage In
16 Current Out
E C C C C 00 01 02 03
C C C C C 04 05 06 07
E C C C C 00 01 02 03
C C C C C 04 05 06 07
00 01 02 03 05 07 04
Voltage Inputs on Top
06 C
00 01 02 03 05 07 04
Current Inputs on Bottom
06 C
00 01 02 03 05 07 04
Voltage Inputs on Top
06 C
00 01 02 03 05 07 04
Current Inputs on Bottom
06 C
Current Input
16 Channels
voltage Input
16 Channels
Open circuit board versions are also available.
Select from more than 100 8B input modules.
Interface to 8B signal conditioning modules.
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: EtherStax ? Series
– 15 –
Performance Specifications
◆ General Specifications
See Page 7 for communication and other specs.
◆ Analog Field Inputs
Input Channel Configuration
16 single-ended analog voltage inputs and
16 single-ended analog current inputs.
Input Ranges (select on per-channel basis)
±5V, ±10V, ±20mA, 0-20mA, or 4-20mA DC.
Input Scaling (per-channel basis)
Floating Point Format: IEEE-754.
Input Resolution
16-bit maximum, 0.00166% (1 part in 60,000).
Input Accuracy
Current Input: Better than 0.1% of range.
Voltage Input: Better than 0.05% of range.
Input Impedance
Voltage: 4M ohms minimum.
Current: 100 ohms.
Input Scan Groups and Scan Times
Eight user-enabled 4-channel scan groups. 770μS
update/group (5mS for all 32 channels) with averag-
ing, loopback, and totalization functions disabled.
Input Overvoltage Protection
Bipolar Transient Voltage Suppressers (TVS),
18V clamp level typical.
Noise Rejection
CMR (50-60Hz): Better than -72dB.
Sample Averaging (user-configurable)
0-500 samples. One register for all channels.
◆ External 8B Input and Output
Modules
See Bulletin 8400-479 for details.
◆ Analog Field Outputs
Output Channel Configuration
16 current outputs.
9-16V DC external excitation required.
Output Ranges (per-channel basis)
0-20mA or 4-20mA DC sourced.
User-configured on a per-channel basis.
Maximum Output Load at Excitation
265 ohms @ 9V.
400 ohms @ 12V.
540 ohms @ 15V.
Output Resolution and Accuracy
Resolution: 13-bit maximum, 0.0122%.
Accuracy: Better than 0.1% of range.
◆ Local Alarm Output
Configuration
Failsafe or non-failsafe (user-configurable) relay trips on
power or link-loss failure.
Type
SPST-NO, 1 Form A, Class I, Division II approved.
Rating
3A @ 24V DC/250V AC, 100,000 cycles general.
2A @ 24V DC/250V AC, Hazardous locations.
Maximum Switching Voltage and Power
250V AC / 750VA, 125V DC / 90W.
◆ i2o Peer-to-Peer Communication
Each port of 8 input channels can be mapped to out-
put ports of two ES215x units. Updates based on time
(100mS resolution) or percent of range change (0.1%
resolution).
◆ Ethernet Interface
Internal Switch or Hub/Repeater
Dual-port Ethernet switch. User-configurable as a true
switch (default mode) or low-latency hub.
Network Connector [10/100 Base-T(X)Copper]
One or two 8-pin RJ-45 connectors. Automatic MDI/
MDI-X. 100m communication distance.
Network Connector (100 Base-FX Fiber-optic)
One multi-mode with SC connector. 2km communica-
tion distance. Full/half-duplex, selectable.
Protocols
Modbus TCP/IP, UDP/IP, i2o peer-to-peer.
Addressing
StaticIP, DHCP, BootP.
Ethernet Modbus TCP/IP Sockets/Sessions
1-10 socket/sessions user-configurable.
Ethernet Redundancy
Compatible with STP, RSTP, or any ring scheme.
◆ Environmental
Operating and Storage Temperature
Operating: -40 to 70°C (-40 to 158°F).
Storage: -40 to 85°C (-40 to 185°F).
Power Requirements
18-36V DC. Redundant, diode-coupled terminals.
4.8W (copper ports), 5.8W (fiber-optic ports).
Isolation
I/O, power, relay and Ethernet port-to-port.
Peak: 1500V AC, ANSI/ISA-82.01-1988.
Continuous: 250V AC, 354V DC (150V AC ch-ch).
◆ Enclosure and Physical
Housing Classification and Dimensions
IP20: 8.226 x 2.444 x 7.25”, 4 lbs. packed.
PCB: 7.920 x 1.875 x 7.25”, 1.65 lbs. packed.
Safety Approvals
CE marked and UL/cUL Listed.
Hazardous Locations: Class I; Div 2; A, B, C, D.
Open board units: UL Recognized.
Shock and Vibration Immunity (in enclosure)
Mechanical Shock: 50g (3ms), 30g (11ms).
Random Vibration: 5g, (5-500Hz).
Ordering Information
◆ EtherStax I/O Units
ES2151-0000
Current/voltage inputs, current outputs,
two Cu ports, IP20 enclosure
ES2151-0010
Current/voltage inputs, current outputs,
two Cu ports, open board (no IP20 enclosure)
ES2151-1000
Current/voltage inputs, current outputs,
Cu & fiber ports, IP20 enclosure
ES2151-1010
Current/voltage inputs, current outputs,
Cu & fiber ports, open board (no IP20 enclosure)
◆ Accessories
8B Modules and Backpanels
See Page 32.
Industrial Ethernet Switches
See Page 33.
Hardware Accessories and Power Supplies
See Page 34.
Software Support
See Page 36.
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: EtherStax ? Series
– 16 –
Description
These EtherStax I/O units provide a rugged, high-
density, and high-speed solution to interface
a large quantity of analog input signals. Units
accept 16 single-ended analog voltage inputs
and 16 single-ended current inputs. The ES2152
also provides 16 analog voltage outputs. Two
DB25 ports support an alternate interface of
voltage I/O from 8B input or output modules.
This combination of high-density analog inputs
and outputs is ideal for many sensor interface
applications in remote zones.
EtherStax units are built and tested for high reli-
ability and dependable performance in hostile
environments. Available in an aluminum enclo-
sure or as an open circuit board, both formats
stack vertically to maintain a very small footprint.
Input Ranges
±5V, ±10V, ±20mA, 0-20mA, 4-20mA DC
Output Ranges
±5V, ±10 V DC
Ethernet Communication
10/100Base-T(X) and 100Base-FX,
Automatic MDI/MDI-X on all copper ports,
Modbus TCP/IP or UDP/IP protocol
i2o peer-to-peer
Power Requirement
18 to 36V DC (redundancy-ready)
Approvals
CE, UL/cUL:
Zone 2, Class 1, Division 2, Groups ABCD
Key Features & Benefits
■ 48-channel high-density combination of
analog inputs and outputs
■ DB25 ports for alternate voltage I/O from 8B
signal conditioning backpanels
■ 4-way isolation and surge suppression
■ High-resolution 16-bit A/D and D/A’s
■ High-speed scanning for 10 millisecond update
of all 48 channels
■ Automatic zero/span calibration
■ Built-in loop-back circuit verifies outputs
■ On-demand self-test verifies calibration
■ Web browser configuration
■ User-configurable sample averaging and
integration/totalization function with
non-volatile registers
■ Dual-format data registers support
16-bit integers or 32-bit floating point
■ Scaling registers on all channels
■ Peer-to-peer i2o communication with
percent-of-span and timed updates
32 analog current/voltage inputs ◆ 16 analog voltage outputs ◆ Modbus TCP/UDP, i2o communication
Dual Power
Alarm Relay
PC w/HMI
PLC / DCS
Controller
Peer-to-Peer
Dual Ethernet Ports
10/100 Base-TX
and 100 Base-FX
Fiber-optic (optional)
N.O.
Voltage Output
8 Channels
Voltage Output
8 Channels
8B Interface
Voltage Input
16 Channels
DB25 ports connect to
new 8B or legacy 7B
signal conditioners
8B Interface
Voltage Output
16 Channels
ES2152
16 Current In
16 Voltage In
16 Voltage Out
E C C C C 00 01 02 03
C C C C C 04 05 06 07
E C C C C 00 01 02 03
C C C C C 04 05 06 07
00 01 02 03 05 07 04
Voltage Inputs on Top
06 C
00 01 02 03 05 07 04
Current Inputs on Bottom
06 C
00 01 02 03 05 07 04
Voltage Inputs on Top
06 C
00 01 02 03 05 07 04
Current Inputs on Bottom
06 C
Current Input
16 Channels
voltage Input
16 Channels
ES2152 Ethernet Analog Input/Output Modules
Open circuit board versions are also available.
Select from more than 100 8B input modules.
Interface to 8B signal conditioning modules.
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: EtherStax ? Series
– 17 –
Performance Specifications
◆ General Specifications
See Page 7 for communication and other specs.
◆ Analog Field Inputs
Input Channel Configuration
16 single-ended analog voltage inputs and
16 single-ended analog current inputs.
Input Ranges (select on per-channel basis)
±5V, ±10V, ±20mA, 0-20mA, or 4-20mA DC.
Input Scaling (per-channel basis)
Floating Point Format: IEEE-754.
Input Resolution
16-bit maximum, 0.00166% (1 part in 60,000).
Input Accuracy
Current Input: Better than 0.1% of range.
Voltage Input: Better than 0.05% of range.
Input Impedance
Voltage: 4M ohms minimum.
Current: 100 ohms.
Input Scan Groups and Scan Times
Eight user-enabled 4-channel scan groups. 770μS
update/group (5mS for all 32 channels) with averag-
ing, loopback, and totalization functions disabled.
Input Overvoltage Protection
Bipolar Transient Voltage Suppressers (TVS),
18V clamp level typical.
Noise Rejection
CMR (50-60Hz): Better than -72dB.
Sample Averaging (user-configurable)
0-500 samples. One register for all channels.
◆ External 8B Input and Output
Modules
See Bulletin 8400-479 for details.
◆ Analog Field Outputs
Output Channel Configuration
16 DC voltage outputs.
Output Ranges (per-channel basis)
±5V, ±10V DC (at ±1mA).
User-configured on a per-channel basis.
Output Impedance
1 ohm maximum.
Output Resolution and Accuracy
Resolution (±10V): 16-bit maximum, 0.00166%.
Resolution (±5V): 15-bit maximum, 0.00305%.
Accuracy: Better than 0.05% of range.
◆ Local Alarm Output
Configuration
Failsafe or non-failsafe (user-configurable) relay trips on
power or link-loss failure.
Type
SPST-NO, 1 Form A, Class I, Division II approved.
Rating
3A @ 24V DC/250V AC, 100,000 cycles general.
2A @ 24V DC/250V AC, Hazardous locations.
Maximum Switching Voltage and Power
250V AC / 750VA, 125V DC / 90W.
◆ i2o Peer-to-Peer Communication
Each port of 8 input channels can be mapped to out-
put ports of two ES215x units. Updates based on time
(100mS resolution) or percent of range change (0.1%
resolution).
◆ Ethernet Interface
Internal Switch or Hub/Repeater
Dual-port Ethernet switch. User-configurable as a true
switch (default mode) or low-latency hub.
Network Connector [10/100 Base-T(X)Copper]
One or two 8-pin RJ-45 connectors. Automatic MDI/
MDI-X. 100m communication distance.
Network Connector (100 Base-FX Fiber-optic)
One multi-mode with SC connector. 2km communica-
tion distance. Full/half-duplex, selectable.
Protocols
Modbus TCP/IP, UDP/IP, i2o peer-to-peer.
Addressing
StaticIP, DHCP, BootP.
Ethernet Modbus TCP/IP Sockets/Sessions
1-10 socket/sessions user-configurable.
Ethernet Redundancy
Compatible with STP, RSTP, or any ring scheme.
◆ Environmental
Operating and Storage Temperature
Operating: -40 to 70°C (-40 to 158°F).
Storage: -40 to 85°C (-40 to 185°F).
Power Requirements
18-36V DC. Redundant, diode-coupled terminals.
4.8W (copper ports), 5.8W (fiber-optic ports).
Isolation
I/O, power, relay and Ethernet port-to-port.
Peak: 1500V AC, ANSI/ISA-82.01-1988.
Continuous: 250V AC, 354V DC (150V AC ch-ch).
◆ Enclosure and Physical
Housing Classification and Dimensions
IP20: 8.226 x 2.444 x 7.25”, 4 lbs. packed.
PCB: 7.920 x 1.875 x 7.25”, 1.65 lbs. packed.
Safety Approvals
CE marked and UL/cUL Listed.
Hazardous Locations: Class I; Div 2; A, B, C, D.
Open board units: UL Recognized.
Shock and Vibration Immunity (in enclosure)
Mechanical Shock: 50g (3ms), 30g (11ms).
Random Vibration: 5g, (5-500Hz).
Ordering Information
◆ EtherStax I/O Units
ES2152-0000
Current/voltage inputs, voltage outputs,
two Cu ports, IP20 enclosure
ES2152-0010
Current/voltage inputs, voltage outputs,
two Cu ports, open board (no IP20 enclosure)
ES2152-1000
Current/voltage inputs, voltage outputs,
Cu & fiber ports, IP20 enclosure
ES2152-1010
Current/voltage inputs, voltage outputs,
Cu & fiber ports, open board (no IP20 enclosure)
◆ Accessories
8B Modules and Backpanels
See Page 32.
Industrial Ethernet Switches
See Page 33.
Hardware Accessories and Power Supplies
See Page 34.
Software Support
See Page 36.
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: EtherStax ? Series
– 18 –
Description
These EtherStax I/O units provide a rugged, high-
density, and high-speed solution to interface
a large quantity of analog input signals. Units
accept 16 single-ended analog voltage inputs
and 16 single-ended current inputs. A DB25 port
supports an alternate interface of voltage inputs
from 8B signal conditioning modules. This combi-
nation of high-density analog current and voltage
inputs is ideal for many sensor interface applica-
tions in remote zones.
EtherStax units are built and tested for high reli-
ability and dependable performance in hostile
environments. Available in an aluminum enclo-
sure or as an open circuit board, both formats
stack vertically to maintain a very small footprint.
.
Input Ranges
±5V, ±10V, ±20mA, 0-20mA, 4-20mA DC
Ethernet Communication
10/100Base-T(X) and 100Base-FX,
Automatic MDI/MDI-X on all copper ports,
Modbus TCP/IP or UDP/IP protocol
i2o peer-to-peer
Power Requirement
18 to 36V DC (redundancy-ready)
Approvals
CE, UL/cUL:
Zone 2, Class 1, Division 2, Groups ABCD
Key Features & Benefits
■ 32-channel high-density combination of
analog current and voltage inputs
■ DB25 ports for alternate voltage I/O from 8B
signal conditioning backpanels
■ 3-way isolation and surge suppression
■ High-resolution 16-bit A/Ds
■ High-speed scanning for 10 millisecond update
of all 32 channels
■ Automatic zero/span calibration
■ On-demand self-test verifies calibration
■ Web browser configuration
■ User-configurable sample averaging and
integration/totalization function with
non-volatile registers
■ Dual-format data registers support
16-bit integers or 32-bit floating point
■ Scaling registers on all channels
■ Peer-to-peer i2o communication with
percent-of-span and timed updates
32 analog inputs (16 current + 16 voltage)s ◆ Modbus TCP/IP, UDP/IP, i2o? peer-to-peer communication
Dual Power
Alarm Relay
PC w/HMI
PLC / DCS
Controller
Peer-to-Peer
Dual Ethernet Ports
10/100 Base-TX
and 100 Base-FX
Fiber-optic (optional)
N.O.
8B Interface
Voltage Input
16 Channels
DB25 ports connect to
new 8B or legacy 7B
signal conditioners
ES2153
16 Current Inputs
16 Voltage Inputs
00 01 02 03 05 07 04
Voltage Inputs on Top
06 C
00 01 02 03 05 07 04
Current Inputs on Bottom
06 C
00 01 02 03 05 07 04
Voltage Inputs on Top
06 C
00 01 02 03 05 07 04
Current Inputs on Bottom
06 C
Current Input
16 Channels
voltage Input
16 Channels
ES2153 Ethernet Analog Input Modules
Open circuit board versions are also available.
Select from more than 100 8B input modules.
Interface to 8B signal conditioning modules.
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: EtherStax ? Series
– 19 –
Performance Specifications
◆ General Specifications
See Page 7 for communication and other specs.
◆ Analog Field Inputs
Input Channel Configuration
16 single-ended analog voltage inputs and
16 single-ended analog current inputs.
Input Ranges (select on per-channel basis)
±5V, ±10V, ±20mA, 0-20mA, or 4-20mA DC.
Input Scaling (per-channel basis)
Floating Point Format: IEEE-754.
Input Resolution
16-bit maximum, 0.00166% (1 part in 60,000).
Input Accuracy
Current Input: Better than 0.1% of range.
Voltage Input: Better than 0.05% of range.
Input Impedance
Voltage: 4M ohms minimum.
Current: 100 ohms.
Input Scan Groups and Scan Times
Eight user-enabled 4-channel scan groups. 770μS
update/group (5mS for all 32 channels) with averag-
ing, loopback, and totalization functions disabled.
Input Overvoltage Protection
Bipolar Transient Voltage Suppressers (TVS),
18V clamp level typical.
Noise Rejection
CMR (50-60Hz): Better than -72dB.
Sample Averaging (user-configurable)
0-500 samples. One register for all channels.
◆ External 8B Input and Output
Modules
See Bulletin 8400-479 for details.
◆ Local Alarm Output
Configuration
Failsafe or non-failsafe (user-configurable) relay trips on
power or link-loss failure.
Type
SPST-NO, 1 Form A, Class I, Division II approved.
Rating
3A @ 24V DC/250V AC, 100,000 cycles general.
2A @ 24V DC/250V AC, Hazardous locations.
Maximum Switching Voltage and Power
250V AC / 750VA, 125V DC / 90W.
◆ Ethernet Interface
Internal Switch or Hub/Repeater
Dual-port Ethernet switch. User-configurable as a true
switch (default mode) or low-latency hub.
Network Connector [10/100 Base-T(X)Copper]
One or two 8-pin RJ-45 connectors. Automatic MDI/
MDI-X. 100m communication distance.
Network Connector (100 Base-FX Fiber-optic)
One multi-mode with SC connector. 2km communica-
tion distance. Full/half-duplex, selectable.
Protocols
Modbus TCP/IP, UDP/IP, i2o peer-to-peer.
Addressing
StaticIP, DHCP, BootP.
Ethernet Modbus TCP/IP Sockets/Sessions
1-10 socket/sessions user-configurable.
Ethernet Redundancy
Compatible with STP, RSTP, or any ring scheme.
◆ i2o Peer-to-Peer Communication
Each port of 8 input channels can be mapped to out-
put ports of two ES215x units. Updates based on time
(100mS resolution) or percent of range change (0.1%
resolution).
◆ Environmental
Operating and Storage Temperature
Operating: -40 to 70°C (-40 to 158°F).
Storage: -40 to 85°C (-40 to 185°F).
Power Requirements
18-36V DC. Redundant, diode-coupled terminals.
4.8W (copper ports), 5.8W (fiber-optic ports).
Isolation
I/O, power, relay and Ethernet port-to-port.
Peak: 1500V AC, ANSI/ISA-82.01-1988.
Continuous: 250V AC, 354V DC (150V AC ch-ch).
◆ Enclosure and Physical
Housing Classification and Dimensions
IP20: 8.226 x 2.444 x 7.25”, 4 lbs. packed.
PCB: 7.920 x 1.875 x 7.25”, 1.65 lbs. packed.
Safety Approvals
CE marked and UL/cUL Listed.
Hazardous Locations: Class I; Div 2; A, B, C, D.
Open board units: UL Recognized.
Shock and Vibration Immunity (in enclosure)
Mechanical Shock: 50g (3ms), 30g (11ms).
Random Vibration: 5g, (5-500Hz).
Ordering Information
◆ EtherStax I/O Units
ES2153-0000
Current/voltage inputs, two Cu ports,
IP20 enclosure
ES2153-0010
Current/voltage inputs, two Cu ports,
open board (no IP20 enclosure)
ES2153-1000
Current/voltage inputs, Cu & fiber ports,
IP20 enclosure
ES2153-1010
Current/voltage inputs, Cu & fiber ports,
open board (no IP20 enclosure)
◆ Accessories
8B Modules and Backpanels
See Page 32.
Industrial Ethernet Switches
See Page 33.
Hardware Accessories and Power Supplies
See Page 34.
Software Support
See Page 36.
: 248-295-0880 ■ : 248-624-9234 ■  ■ ■ 30765 S Wixom Rd, Wixom, MI 48393 USA
Ethernet I/O: EtherStax ? Series
– 20 –
Description
These EtherStax I/O units provide a rugged, high-
density, and high-speed solution to interface
a large quantity of analog input signals. Units
accept 32 differential analog current inputs,
which are ideal for many sensor interface
applications in remote zones. Available in an
aluminum enclosure or as an open circuit board,
both packages stack vertically to maintain a
very small footprint. Many other features help
increase reliability, improve performance and
protect from harsh environments.
Input Ranges
±20mA, 0-20mA, 4-20mA DC
Ethernet Communication
10/100Base-T(X) and 100Base-FX,
Automatic MDI/MDI-X on all copper ports,
Modbus TCP/IP or UDP/IP protocol
Power Requirement
18 to 36V DC (redundancy-ready)
Approvals
CE, UL/cUL:
Zone 2, Class 1, Division 2, Groups ABCD
Key Features & Benefits
■ 32 differential current analog inputs
■ 4-way isolation and surge suppression
■ Configurable from any web browser