国产强伦姧在线观看无码,中文字幕99久久亚洲精品,国产精品乱码在线观看,色桃花亚洲天堂视频久久,日韩精品无码观看视频免费

意大利GIVI MISURE    MTR H   Pole pitch 5+5 mm   Pr    電磁尺
意大利GIVI MISURE    ? MTV    電磁尺
意大利GIVI MISURE    MTV P   Pole pitch 1+1 mm    電磁尺
意大利GIVI MISURE    MTV M   Pole pitch 2+2 mm    電磁尺
意大利GIVI MISURE    MTV I   Pole pitch 2.54+2.54 mm    電磁尺
意大利GIVI MISURE    MTV H   Pole pitch 5+5 mm    電磁尺
意大利GIVI MISURE    MTV S   Pole pitch 6.25+6.25 mm    電磁尺
意大利GIVI MISURE    ? AGM    電磁尺
意大利GIVI MISURE    AGM M   Pole pitch 2+2 mm, SSI-BiSS interface    電磁尺
意大利GIVI MISURE    AGM M   Pole pitch 2+2 mm, CANopen interface    電磁尺
意大利GIVI MISURE    ? VISION 110    電磁尺
意大利GIVI MISURE    VISION 110 S   Small version    電磁尺
意大利GIVI MISURE    VISION 110 L   Large version    電磁尺

Coupling   HELI-CAL    
Dimensions
(D x L)    Hole diameter
(d1 0 ÷ 0.05)    Fixing    Max. Torque    
20x20 mm    6 mm    4 screws M3    1.1 Nm
20x20 mm    8 mm    4 screws M3    1.0 Nm
25x24 mm    6 mm    4 screws M4    2.9 Nm
25x24 mm    8 mm    4 screws M4    2.6 Nm
25x24 mm    9.52 mm    4 screws M4    2.2 Nm
25x24 mm    10 mm    4 screws M4    2.2 Nm

Coupling   SPRING    
Dimensions
(D x L)    Hole diameter
(d1 0 ÷ 0.05)    Fixing    Max. Torque    
16x35 mm    6 - 8 - 10 mm    2 screws M4    1.0 Nm
 
 
 
 
 

Coupling   CTFX    
Dimensions
(D x L)    Hole diameter
(d1 0 ÷ 0.05)    Fixing    Max. Torque    
19x26 mm    6 - 8 - 10 mm    2 screws M4    1.4 Nm
 
 
 
 
 

Coupling   PGFX    
Dimensions
(D x L)    Hole diameter
(d1 0 ÷ 0.05)    Hub
diameter (d)    Fixing    Max. Torque    
26x28 mm    6 - 8 mm    18 mm    2 screws M3    0.3 Nm
48x48 mm    10 - 12 mm    25 mm    2 screws M4    1.3 Nm
 
 
 
 

Coupling   OLDHAM    
Dimensions
(D x L)    Hole diameter
(d1 0 ÷ 0.05)    Fixing    Max. Torque    
16x35 mm    6 - 8 - 10 mm    4 screws M4    1.0 Nm
 

VI518   Standard version    
Display    8 high-efficiency digits   h = 13 mm    
Incremental encoder input signals    2 square waves with phase displacement of 90° ± 5° and zero ref.
5 Vdc or 12 Vdc
Power supply    230 Vac ± 10% - 50/60 Hz     40 mA
110 Vac ± 10% - 60 Hz          80 mA
24 Vac ± 10% - 50/60 Hz     350 mA
Memory    permanent for configuration
and “user” settings意大利GIVI MISURE    MTR H   Pole pitch 5+5 mm   Pr    電磁尺泵 
(last data operating memory)
Available resolutions    200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 μm
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0.01° - 0.005° - 0.002° - 0.001°

VI518   Version with options    
Display    8 high-efficiency digits   h = 13 mm    
Incremental encoder input signals    2 square waves with phase displacement of 90° ± 5° and zero ref.
5 Vdc or 12 Vdc
Absolute (SSI) encoder input signals    RS-422: Clock+, Clock-, Data+, Data-
Power supply    230 Vac ± 10% - 50/60 Hz     40 mA
110 Vac ± 10% - 60 Hz          80 mA
24 Vac ± 10% - 50/60 Hz     350 mA
Memory    permanent for configuration
and “user” settings
(last data operating memory)
Available resolutions    200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 μm
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0.01° - 0.005° - 0.002° - 0.001°
Options    serial output RS-232
relay outputs
static relays AC - static relays DC
absolute (SSI) encoder input

VI722 - VI723   With 2 displays    
Display    7 high-efficiency digits   h = 17 mm    
Encoder input signals    2 square waves with phase displacement
of 90° ± 5° and synchronized index
5 Vdc
Available resolutions    200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 μm
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0.01°
0.005° - 0.002° - 0.001°
Protection class    keyboard IP 67   rear panel IP 42
Input axes    2 - 3
Applicable to    lathe - milling machine - boring machine - etc.
Power supply    230 Vac ± 10% - 50/60 Hz     50 mA
110 Vac ± 10% - 60 Hz        100 mA
24 Vac ± 10% - 50/60 Hz     450 mA
Version    standard or flush-mounted意大利GIVI MISURE    MTR H   Pole pitch 5+5 mm   Pr    電磁尺泵 

VI722L - VI723L   With 2 displays and LCD    
Display    7 high-efficiency digits   h = 17 mm    
Encoder input signals    2 square waves with phase displacement
of 90° ± 5° and synchronized index
5 Vdc
Available resolutions    200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 μm
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0.01°
0.005° - 0.002° - 0.001°
Protection class    keyboard IP 67   rear panel IP 42
Input axes    2 - 3
Applicable to    lathe - milling machine - boring machine - etc.
Power supply    230 Vac ± 10% - 50/60 Hz     50 mA
110 Vac ± 10% - 60 Hz        100 mA
24 Vac ± 10% - 50/60 Hz     450 mA
Version    standard or flush-mounted

VI733 - VI734   With 3 displays    
Display    7 high-efficiency digits   h = 17 mm    
Encoder input signals    2 square waves with phase displacement
of 90° ± 5° and synchronized index
5 Vdc
Available resolutions    200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 μm
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0.01°
0.005° - 0.002° - 0.001°
Protection class    keyboard IP 67   rear panel IP 42
Input axes    3 - 4
Applicable to    lathe - milling machine - boring machine - etc.
Power supply    230 Vac ± 10% - 50/60 Hz     50 mA
110 Vac ± 10% - 60 Hz        100 mA
24 Vac ± 10% - 50/60 Hz     450 mA
Version    standard or flush-mounted0355-4D-08 0030-32
0400-2D-21 0075-62
0400-4D-10 0030-32
0450-4D-13 0030-32
0500-4D-16 0030-32
0500-6D-11 0030-32
0560-4D-19 0075-62
0560-6D-14 0030-32
0630-4D-23 0075-62
0630-6D-19 0030-32
REM 41-/48- ESH 21-
0200-2D-07 0030-32
0200-4D-05 0030-32
0225-2D-10 0030-32
0225-4D-05 0030-32
REM 41-/48- ESH 21-
0250-2D-13 0030-32意大利GIVI MISURE    MTR H   Pole pitch 5+5 mm   Pr    電磁尺泵 
0250-4D-07 0030-32
0280-2D-14 0030-32
0280-4D-07 0030-32
REM 41-/48- ESH 21-
0315-2D-19 0075-62
0315-4D-10 0030-32
0355-4D-12 0030-32
0400-4D-14 0030-32
0450-4D-17 0055-32
Accessories
Direct driven centrifugal fans / TEM/REM / Accessories
Isolator - Assignment
Isolator - Assignment
76
Accessories
Direct driven centrifugal fans / Appendix / Accessories
Frequency converter
Design
Frequency inverter with variable output voltage and frequency, specially designed for
the operation of centrifugal fans with induption motors. Due to the use of modern power semiconductors it is possible to achieve a speed of revolution with high efficiency.
Switching frequencies up to 16 kHz can be set with all types. If the highest switching
frequencies are required (for example for reasons of noise reduction), the maximum
output current is decreased, in which case the performance category should be
specially checked.
The overall package includes the frequency inverter, filter for class B (for
residential and commercial uses) as well as a control unit.
General Performance characteristics
Motor protection feature for motors with thermistor temperature sensors, adjustable
accelaration and deaccelaration ramps, minimum and maximum rotation speeds,
fixed rotation speeds, trapping switch during operation, programmable inputs and
PI-controller (MM420 and MM430 only), RS485 serial interface as well as a detailed
operating instructions. Caution about combination with isolators (ESH)! Special EMCaction can be necessary, furthermore do not switch during operation, overvoltages
can destroy the switch and the motor-winding.
Performance range G110 1AC 230V (for single-phase AC supply)
0.25 kW to 2.2 kW rated motor power, 200 V to 240 V 10 % single-phase AC, 47 Hz
up to 63 Hz, three-phase current output 3×230 V AC, protection class IP20.
Permitted ambient temperature during operation: -10 °C up to +40 °C.
Performance range MM420 3AC 400V (for three-phase AC supply)
0.55 kW to 11 kW rated motor power, 380 V to 480 V 10 % three-phase AC, 47 Hz
up to 63 Hz, three-phase current output 3×400 V AC, protection class IP20. Permitted ambient temperature during operation: -10 °C up to +50 °C. The interference
suppression filter required to comply with the EMC basic interference suppression
standard EN 50081-1 (residential and commercial uses) is integrated into the package
as substructure option. Power choke to comply with EN 61000-3-2 as additional
component.
Observe performance reduction when using high clock frequencies!
Performance range MM430 3AC 400V
(for three-phase AC supply)
15 kW to 250 kW rated motor power, 380 V to 480 V 10 % three-phase AC, 47 Hz
up to 63 Hz, three-phase current output 3×400 V AC, protection class IP20.
Permitted ambient temperature during operation: -10 °C up to +50 °C. The interference suppression filter required to comply with the EMC basic interference suppression standard EN 50081-1 (industrial applications) is partially integrated. In order to attain EMC requirements Class B a frequency inverter without filter should be selected.
The appropriate EMC-B filter is then required as an additional component.
Observe performance reduction when using high clock frequencies!
The indicated ratings of the units are made for a quick selection. The exact dedication
of an inverter in this catalogue is made by taking into account of the max. admitted
current at a pulse frequency of 4 kHz. It is important to know that at higher pulse
frequencies the supplied current of the inverter will be decreasing, with the possible
consequences of having to select a larger inverter unit. Also longer feed lines or additional radio frequency filters may lead to the choice of a larger inverter size.
The selected frequency inverters (G110 und MM420) are units contains the
frequency inverter (as shown in the following tables) with the matching interference suspression filter (Class B) and a control panel. A further component
is the line choke which is available as an accessorie. For more information the
available frequency inverters are shown in the following tables.
77
b
a
c
a b c
6SL3211- kW A mm mm mm kg
0AB12-5BA0 0.25 1.7 150 90 116 0.8
0AB13-7BA0 0.37 2.3 150 90 116 0.8
0AB15-5BA0 0.55 3.2 150 90 131 0.9
0AB17-5BA0 0.75 3.9 150 90 131 0.9
0AB21-1AA0 1.1 6 160 140 142 1.5
0AB21-5AA0 1.5 7.8 160 140 142 1.5
0AB22-2AA0 2.2 11 181 184 152 2.1
b
a
c
a b c
6SE6420- kW A mm mm mm kg
2UD15-5AA1 0.55 1.6 173 73 149 1
2UD17-5AA1 0.75 2.1 173 73 149 1
2UD21-1AA1 1.1 3 173 73 149 1
2UD21-5AA1 1.5 4 173 73 149 1
2AD22-2BA1 2.2 5.9 202 149 172 3.3
2AD23-0BA1 3 7.7 202 149 172 3.3
2AD24-0BA1 4 10.2 202 149 172 3.3
2AD25-5CA1 5.5 13.2 245 185 195 5
2AD27-5CA1 7.5 18.4 245 185 195 5
2AD31-1CA0 11 26 245 185 195 5
b
a
c
a b c
6SE6430- kW A mm mm mm kg
2AD31-5CA0 15 32 245 185 195 5.7
2AD31-8DA0 18.5 38 520 275 245 17
2AD32-2DA0 22 45 520 275 245 17
2AD33-0DA0 30 62 520 275 245 17
2AD33-7EA0 37 75 650 275 245 22
2AD34-5EA0 45 90 650 275 245 22
2AD35-5FA0 55 110 1150 350 320 75
2AD37-5FA0 75 145 1150 350 320 75
2AD37-8FA0 90 178 1150 350 320 75
2UD41-1FA0 110 180.4 1450 326 356 116
2UD41-3FA0 132 220 1450 326 356 116
2UD41-6GA0 160 265.8 1533 326 545 116
2UD42-0GA0 200 325.6 1533 326 545 116
2UD42-5GA0 250 419.8 1533 326 545 116
Accessories
Direct driven centrifugal fans / Appendix / Accessories
Frequency converter
Technical Data | Dimensions
For three-phase AC motors on the single-phase supply.
Technical Data | Dimensions
For three-phase AC motors on the three-phase supply
Technical Data | Dimensions
For three-phase AC motors on the three-phase supply
Nominal power
Nominal
current Weight
Nominal power
Nominal
current Weight
Nominal power
Nominal
current Weight
78
EUM 33- A A kW
0004-8D 0.4 +0.2...+0.4 0.09
0006-8D 0.6 +0.4...+0.6 0.12
0010-8D 1.0 +0.6...+1.0 0.25
0016-8D 1.6 +1.0...+1.6 0.55
0024-8D 2.4 +1.6...+2.4 0.8
0040-8D 4.0 +2.4...+4.0 1.5
0060-8D 6.0 +4.0...+6.0 2.5
0100-8D 10 +6.0...+10 4.0
0160-8D 16 +10...+16 7.5
0200-8D 20 +16...+20 9.0
0250-8D 25 +20...+25 12.5
0500-8D 50 +25...+50 25
0580-8D 58 +50...+58 30
L3
PE
L2
L1
1 3 5
2 4 6
U1 V1 W1
EUM33
97
160
130
47.5
181
114
Direct driven centrifugal fans / Appendix / Accessories
Motor protection unit
Motor protection unit EUM 33
Motor protection unit for three-phase current motors (standard motors) without thermal contacts.
Design
Plastic casing in protection class IP55, permissible ambient temperature +40 °C,
40 Hz up to 60 Hz, frontal operation, for wall mounting. Motor protection unit for singlespeed, non-variable speed three-phase current motors without thermal contacts.
Function
The motor protection units must be adjusted on site to the trigger current. If the
preset trigger current is exceeded, the device disconnects the motor from the mains
supply via a thermal overload release. Pressing the “on key” causes the unit to turn on
again.
All motor protection units EUM33 are also suitable for the protection of EExe-motors
(PTB-Prüfung Gesch-Nr. 3.35/386.3060). They must however be mounted outside of
explosion endangered areas, since they are not themselves designed with explosion
protection.
Dimensions in mm, subject to change. Technical Data
Wiring Diagram
Accessories
Continuous current Setting range
Max.
nominal power
79
ERA 02- V V mA VA °C
4000-5E 0...10 0...10 10 IP20 10 +0...+40
Accessories
Direct driven centrifugal fans / Appendix / Accessories
Universal control device
Universal control device for installation in control cabinets Digital control module for
controlling pressure, air velocity or volume flow (PI controller). For example, a transformer for fans is controlled via the 0...10 V output. The device is designed for installation in control cabinets.
Type
Multi functional LC-display for actual and nominal values (m/s, hPa = mbar, 100 m3/h).
Menuassisted adjustment via three function keys.
Actual value input 0...10 V e. g. for:
air speed sensors Type EIL in measuring ranges from 0...1 m/s and 0...10 m/s e. g.
for:
- Air velocity control in clean room technology.
Pressure sensors Type EIP in measurement ranges 50Pa up to 4000Pa e. g. for:
- Pressure control in canal systems of air conditioning systems (VVS) or
- Flow control in centrifugal fans with pressure tappings in the inlet cone. The control
module calculates the required flow (m3/h) from the differential measured pressure
between the surrounding level and inlet cone, maximum volume flow 65536 m3/h.
Output 0...10 V e. g. for controlling a transformer.
Failure message is output via display (internal/external) and relay programmable.
External set value specification via potentiometer or 0...10 V signal.
Specification of two set values (day/night), can be switched over externally or via
keyboard.
Protection against unauthorised setting by keyboard code.
Application area
Pressure regulation for centralised ventilation systems and variable volume flow systems for building air conditioning (VVS) e.g. in combination with a frequency inverter
or a commutation unit or a transformer and a pressure sensor
Volume flow regulation for centrifugal fans (with measuring stub in the inlet cone)
e.g. in combination with a frequency inverter or a commutation unit or a transformer
or a mini-interface inverter and a pressure sensor and the volume flow volumeter.
Maximum volume flow 65536 m3/h.
Air speed regulation for clean room systems, e.g. in combination with a transformer
and an air speed sensor
Electrical connection and installation
Connection to 230 V, 50/60 Hz. The control module can be installed in a control
cabinet door. Admissible relative humidity: 85 %, noncondensing. Power supply for
the sensors included:
+24 V, 20 %, Imax = 70 mA.
Setting options
Set values in the measurement range of the sensor (m/s, hPa = mbar), or in the
volume flow range of the fan (×100 m3/h)
Switch over of set value (day/night)
Min./max. setting range
Translation of performance curve (P component)
Constant of integration can be selected (I component)
Reversal of the effect of the control behaviour
Rotation of the performance curve
Switchover or programming of internal/external set value
Sensor selection via keypad
Programming for ”Filter fault”
Keypad code
K factor entry (The K-factor can be found in the current lists of our fan line)
Technical Data
Input
voltage
Output
voltage
Max.
output
current
Motor
protection
class
Operating
consumption
Operating
temperatur
80
106
166.5 44 10.5
max. 105
159
99
L1 N PE 11 14 12 21 24 22
D+
D–
24V
GND
24V
D1
D2
D3
A1
A2
GND
GND
E1
E2 E1
E2
°C
V
mA
°C
V
mA
K1 K2
DATA
+
B GND
RS485
+
A + +
(+) (–)
Direct driven centrifugal fans / Appendix / Accessories
Universal control device
Dimensions in mm, subject to change.
Wiring Diagram
Accessories
Instrument panel window
1 = Mains
2 = Out, 24 V DC
3 = Input, Digital 1/2/3
4 = Out, Analog 1/2
5 = Input, Analog 0-10 V 1/2
6 = A1 Out 0-10 V
7 = A2 Out 0-10 V
8 = E1 Input 0-10 V
9 = E2 Input 0-10 V
AT = Contact ratingmax. 5 A / 250 V AC
81
EIP 01- Pa mA Pa V °C
0200-12 0 ... +200 IP65 12 20000 0 ... +10 0 ... +50
0500-12 0 ... +500 IP65 12 20000 0 ... +10 0 ... +50
1000-12 0 ... +1000 IP65 12 20000 0 ... +10 0 ... +50
2000-12 0 ... +2000 IP65 12 20000 0 ... +10 0 ... +50
4000-12 0 ... +4000 IP65 12 20000 0 ... +10 0 ... +50
70
~500 4.5
50
8
?5
16
+
+ ~
-
=
~
p
p
⊥
+
0...10V DC
 5 mm 15...30 V DC
24 V AC ±10 %
Direct driven centrifugal fans / Appendix / Accessories
Differential pressure sensor
Differential pressure sensor with membrane for measuring the pressure, negative
pressure or differential pressure of nonaggressive gases.
Type
The differential pressure to be measured acts transformed into an output signal of
0...10 V by electronics (in SMD technology).
Application ranges
Volume flow regulators in centrifugal fans (with volume flow measuring device IMV)
in connection with a frequency inverter type G110, MM420, MM430, or a universal
regulator appliance type ERA 02-4000-5E in connection with a frequency regulator.
Electrical connection and installation
The differential pressure sensor delivers a starting signal (0...10 V) by pressure increase at the ”Plus” connection opposite pressure on the ”Minus” connection.
Voltage supply
15...30 V DC or 24 V AC, 15 %
Pressure connections must point downward, tube connection ?5mm
Measuring accuracy
Null drift: 0.75 %
Sum of linearity and hysteresis: 1 %
Temperature drift zero point: 0.3 %/10 K
Temperature drift length of measurement: 0.2 %/10 K
Dimensions in mm, subject to change. Technical Data
Wiring Diagram
Pressure
range
Motor
protection
class
Max. current
consumption
Overload
protection
Output signal
proportional
Operating
temperatur
Accessories
Pressure connections Power supply
Output
brown
yellow
white
82
a
b
c
d
ESH 21 ≤3 kW
a
b
d c
ESH 21 ≥5.5 kW
a b c d
ESH 21- kW mm mm mm
0030-22 3 73 108 45 –
0030-25 3 73 108 45 –
0030-32 3 73 108 45 –
0030-35 3 73 108 45 –
0030-62 3 73 108 45 –
0030-65 3 73 108 45 –
0055-32 5.5 85 120 80 110
0055-65 5.5 125 125 126 157
0075-32 7.5 85 120 80 110
0075-35 7.5 85 120 80 110
0075-62 7.5 100 190 91 133
0075-95 7.5 125 125 126 157
0110-32 11 85 160 80 110
0110-62 11 100 190 91 133
0150-32 15 100 190 91 120
0150-62 15 145 250 100 145
0220-32 22 100 190 91 120
0220-62 22 145 250 100 145
0300-32 30 145 250 100 140
0300-62 30 200 300 172 200
0370-32 37 145 250 100 140
0370-62 37 200 300 172 200
0450-32 45 200 300 172 200
0450-62 45 300 300 172 210
0550-32 55 200 300 172 200
0550-62 55 300 300 172 210
0900-32 90 280 400 180 210
0900-62 90 280 280 260 327
Accessories
Direct driven centrifugal fans / Appendix / Accessories
Isolator ESH 21
Isolator
ESH 21 (≤3 kW)
Isolator
ESH 21 (≥5.5 kW)
Design
Beautifully shaped, shock-resistant plastic casing. Protection class IP44/IP65, for
sur-face mounting, switching symbols 0 and I. The isolator is fitted with connection
terminals that are very accessible and has a con-nection diagram glued in the casing.
The ESH21 up to 3 kW is designed to IP44. It is equipped with an integrated locking mechanism.
The ESH21 up to 5.5 kW is designed to IP65. It is equipped with a coupling cover
and an integrated locking mechanism. A padlock can in some cases be fitted to the
rotary switch.
Function
The isolator disconnects the fan safely from the mains in the event of cleaning, maintenance or repair work on site and thus avoids accidents due to uncontrolled activation of the unit by third parties. It is no main switch or emergency switch.
All of the classified isolators are fitted with potential-free contacts (1 closer
and 1 opener).
The isolators for motors with a built-in thermal contact have on principle three supplementary auxiliary contacts, so that the pre-switched control device does not drop out
during cleaning or servicing work due to motor.
Caution about combination with frequency inverter!
Special EMC-action can be necessary, furthermore do not switch during operation,
overvoltages can destroy the switch and the motor-winding.
The isolators are grouped according to motor rated power.
All important characteristic data are evident from the model designation. E.g.: ESH 21-0030-65
= 3 kW switch - 6 main contacts - 5 auxiliary contacts
Dimensions in mm, subject to change. Technical Data
Permissible motor power
83
a
b
d
c
a b c d
ESH 22- kW mm mm mm mm
0075-32 7.5 122 120 120 120 2×PG21 2×PG21
0110-32 11 122 120 120 120 2×PG21 2×PG21
0150-32 15 180 180 130 130 2×PG21 2×PG21
0220-32 22 180 180 130 130 2×PG21 2×PG21
0300-32 30 230 280 150 150 2×PG29/1×PG16 2×PG29
0370-32 37 230 280 150 150 2×PG36/1×PG16 2×PG36
0075-62 7.5 180 180 130 130 1×PG29/1×PG16 2×PG29
0110-62 11 180 180 130 130 1×PG36/1×PG16 2×PG36
0150-62 15 230 280 150 150 2×PG36/1×PG16 2×PG36
0220-62 22 230 280 150 150 2×PG36/1×PG16 2×PG36
0300-62 30 230 280 150 150 2×PG36/1×PG16 2×PG36
0370-62 37 230 280 150 150 2×PG36/1×PG16 2×PG36
0055-35 5.5 180 180 100 100 2×PG21 2×PG21
0075-65 7.5 116 95 80 80 2×PG16 2×PG16
0075-95 7.5 116 95 80 80 2×PG16 2×PG16
Accessories
Direct driven centrifugal fans / Appendix / Accessories
Isolator ESH 22
Design
Shock-resistant metal casing, black switch with symbols 0 and I. Protection class
IP65 or IP54, for surface mounting (see determination in the tabular).
The isolator is fitted with connection terminals that are very accessible and has a
connection diagram glued in the casing.
All isolators are equipped with a coupling cover and an integrated locking mechanism. In some cases a padlock can be fitted to the rotary switch.
Function
The isolator disconnects the fan safely from the mains in the event of cleaning,
maintenance or repair work on site and thus avoids accidents due to uncontrolled
activation of the unit by third parties. It is no main switch or emergency switch.
All of the classified isolators are fitted with potential-free contacts (1 closer
and 1 opener).
The isolators for motors with a built-in thermal contact have on principle three supplementary auxiliary contacts,so that the preswitched control device does not drop out
during cleaning or servicing work due to motor.
Use
The isolator ESH22 with metal casing is necessary, if screened components must
be used. (e.g. frequency inverters or control engineering devices are used featuring
electronic components).
Attention!
Do not switch during operation, overvoltages can destroy the switch and the motor
winding!
Permissible motor
power
Cable lead-through
(top)
Cable
leadthrough
(bottom)
Dimensions in mm, subject to change. Technical Data
The isolators are grouped according to motor rated power.
All important characteristic data are evident from the model designation. E.g.: ESH 22-0075-65
= 7.5 kW switch - 6 main contacts - 5 auxiliary contacts
84
psF = pF – pd2
L
pA6/7 ~ LWA4/7 - 7dB
Description
Direct driven centrifugal fans / TEM/REM / Description
Safety
The fans are designed for installation in equipment and as standard are not equipped
with protective guards.
They should not be put into operation before all protective devices are fitted
and connected!
Protective measures must be carried out as set out in DIN EN ISO 12100 "Safety of
machinery - Basic concepts, general principles for design".
If the application of the fan allows free access to the inlet and discharge apertures,
safety devices must be put in place on the fan in accordance with DIN EN ISO 13857!
Suitable safety guards are available as an optional extra.
Performance data
The performance curves of the fans are determined at the plenum test rig according
to ISO 5801, measured in installation "B".
In the diagrams of all series, the total pressure increase pF and the dynamic pressure
in relation to the flange crosssection at the discharge pd2 are represented in dependency on the volume.
For closer determination of duty same unit performance curves (parabolas) are contained in the diagrams.
The static pressure increase psF with a connected discharge flange can be determined according to the following relation:
All data are valid for the source density r1 = 1.2 kg/m3.
Sound
The noise measuring and evaluation is conducted according to DIN 45635-38 ”Noise
measurement in machines: fans”.
In the diagrams the A-weighted sound power level of the fan is given on the performance curves as the emission size.
The “A” weighted sound power level are identical for fan intake (LWA7) as well as for
fan discharge (LWA4).
The A-weighted sound pressure level LpA7/6 at a distance of 1 m at fan Inlet or discharge can be approximay determined by the following formula:
The sound power levels in the individual octavos can be taken from the electronic
catalogue ”proSELECTA II”.
Media
The series of centrifugal fans, with single inlet are designed for the use in air handling
and ventilation installations.
The fans are suitable for conveying air and other non aggressive gases. The temperatures admitted for the fluid are from -20 °C to +60 °C.
Motors
Standard motors of wellknown brands, type of protection IP55, thermal class F, are
used. During commissioning and maintenance the detailed instructions provided by
the motor manufacturer (type plate/motor operating instructions) must be followed,
this also applies to the motor protection devices required onsite. The motors are
equipped with PTC resistors/temperature sensors as standard. Motors with integrated frequency inverters may be supplied on request.
Electric connection
The centrifugal fans are delivered ready for installation.
The motor terminal box can be accessed easily.
Electric installation must be carried out according to the applicable provisions in
compliance with local regulations. A terminal board circuit diagram showing correct
connection is enclosed with every motor.
Updated circuit diagrams are also available online at www.nicotra-gebhardt。。ｃｏｍ.
In case of operation with frequency inverters, always follow the respective operating
instructions!
85
Description
Direct driven centrifugal fans / TEM/REM / Description
Explosion protection according to ATEX
Fans for use in explosive atmospheres must comply with EC Directive 94/9/EG
(ATEX 95). Equipment in Group II (all applications except mining) is categorised in
accordance with the required degree of safety for designated use in equipment categories 1, 2 and 3. Depending on suitability, a distinction is in addition made between
G (gas, vapours) and D (dust).
Harmonised European standards and national guidelines must be observed. Equipment in class 2 and 3 is not subject to compulsory specifications nor to type testing.
The manufacturer declares conformity with the EC directive.
For the standard designs of our fans, the following ignition sources are essentially to be considered:
Hot surfaces, e.g. due to heat of friction or seizure of a bearing or due to blockage
of an impeller
Rubbing-, grinding- or beating sparks, e. g. as a result of contact of the impeller
with stationary components
Sparks resulting from discharge of electrostatically loaded, non-conducting omponents, e. g. of plasticpanels, surfaces with strong layer thickness.
Preconditions for operating:
In the proximity of the motor, the temperature limits -20 °C and +40 °C must not be
exceeded.
The temperature limits of -20 °C und +60 °C for the flow medium must not be
exceeded. If the temperature of the flow medium should exceed +60 °C on the
pressure side, then the fan must be switched off!
The fans may only be employed with a horizontal shaft.
The fans are to be protected against the falling-in or sucking-in of foreign objects.
Protection guards must be ordered separay as an accessories.
On the machine plate the max. permitted fan speed is indicated.
Fans for operation in ex-hazardous areas are marked as such on the machine plate
and they are accompanied by an EU conformity declaration and with operation and
maintenance instructions
The operation and maintenance instructions have strictly to be observed.
Quality management system
DIN EN ISO 9001
Nicotra Gebhardt quality is the result of a continuous company policy intended to
guarantee that our product properties and features are clearly superior to comparable
products.
This already established company maxim led in April 1985 to the auditing and certification of the existing quality management system. In the following years it was updated to match the changing international and European standards. Modern production
processes, monitored by our quality management system, guarantee a high repeat
accuracy in production.
This ongoing high standard of quality permits the establishing of the performance
data in classes of accuracy in accordance with DIN 24166.
The narrow tolerances ensure a high level of data reliability for our products.
Machine Safety
The fans contained in this catalogue are not machines in the sense of the EC Machine
Directive. They are delivered with a manufacturer "Declaration of incorporation".
The assessment of the dangers associated with the fan and necessary safety measures are based on the VDMA Unit sheet 24167 : Fans; Safety requirements.
The operating instructions give which safety measures are still necessary on assembly
to ensure that the fans comply with the Machine Directive 2006/42/EC.
Catalogue data
We reserve the right to change any measurements and technical data in this catalogue in accordance with further development of our products. All information valid at
the time of printing.
86
Direct driven centrifugal fans / Appendix / Notes
Notes
87
Direct driven centrifugal fans / Appendix / Notes
Notes
88
EN-TD3-CFD-SI-1.4 – PDF1-07.2013
AUSTRALIA 65 Yale Drive, nicotra-gebhardt.com
 1
Fan Filter Units
The most advanced
customized solutions
for clean room technology –
designed and produced from a single supplier.
Issue 7.0 EN
February 2012
2
Nicotra Gebhardt
has defined
their core competences:
A Aerodynamics
A Acoustics
A Electrical motors
A Control systems
Filter Fan Units made by Nicotra Gebhardt are available
A as standard or customised versions
A for standard and customised ceiling grids
A for different filter and grid sizes
A as top load or bottom load versions
A for liquid or gasket seal systems
A for various air flows and pressure drops
A with minimal vibration and audible noise emissions
A with an external rotor motor system
A speed variation via BUS or supply voltage
A for various control systems
Brushless DC - version
A Internet/Intranet access for controlling, monitoring and visualising
A easy to install and set up with automatically addressed motor electronics
A built-in power factor controller (PFC) for reactive current compensation
A integrated self diagnosis and status messages
A high operational reliability as the impeller runs on latest command after
power drop or loss
Nicotra Gebhardt
has developed control
software to monitor different
ventilating systems,
room configurations
and airflows.
Why should FFU’s be used in cleanrooms?
Benefits which count …
... Redundancy
With hundreds, or thousands of individual FFU’s in a facility,
the loss of one or more units does not jeopardise the integrity of the room.
... Flexibility
As the needs or uses change in a facility, the units can be
exchanged with lay-in lights or blank panels. For facilities
with lower classification, upgrades can be obtained by
simply adding additional FFU’s. When a computer controlled
management system is installed, units or clusters of units
can be remote controlled to operational needs.
... Cost effective
Use motors with the lowest power consumption available.
With complete controllability of each and every FFU (via
control and monitoring software) use just as much of power
as necessary for your process.
... Negative plenum
The negative plenum design draws recirculation air from
the plenum itself. If there are any leaks, they migrate to the
negative plenum and NOT the cleanroom.
... Salvageability
FFU’s are fully salvageable as stand alone units.
Monitoring
Clean room processes call for
the most advanced ventilation
technologies that match to the
specifications of the building
infrastructure:
Choose your special
requirements.
dimensions construction
materials
sealing
systems
volume and noise criteria
pressure
motor
performance
control and
bus system
Please use the questionnaire
inside this brochure and we
will provide an offer that
meets your needs.
Investment in laboratories and
test facilities enable
Nicotra Gebhardt to deal with
the most sophisticated tasks
in every area of the mentioned
fields.
3
Filter Fan Units ar key
elements in clean room ventilation systems.
Nicotra Gebhardt supplies the
elements for Filter Fan Units (FFU)
as well as the units themselves.
Starting from standard FFU design, our team of experts implements the specification for your
special project.
Nicotra Gebhardt’s
aerodynamics research laboratories
have brought forth over 50 years
of experience in leading-edge
fan design and highly efficient
technology.
Since the very beginning of
the Nicotra Gebhardt company the external rotor motor has
been an essential element for
driving fans.
Nicotra Gebhardt has a manufacturing facility for production of
external rotor motors – the conventional asynchronous version
and the electronically controlled
brushless DC design. An expert
team with special laboratories
and test rigs is pushing this development to new frontiers.
Fans
Motors
Casing
To guarantee a Running System
join the power of your
Convergence Company.
4
What are the
exact dimensions required
for your ideal
FFU design?
1. Dimensions of ceiling grid:
(length, width, height in mm)
ceiling grid:
l: w:
clearance between ceiling grid:
l
1: w1:
mounting clearance:
l
2: w2:
T-bar
l
3: w3:
h:
2. Filter adaptions:
sealing method:
dry fluid
3. Casing:
material:
galvanised aluminium
sheet metal zinc coated
(GI 90) (AZ 150-300G)
stainless steel aluminium
(SUS 430) (AI Mg3 W19)
fittings:
protection pre-filter
grid connector
structured
to support
body weight
4. Requirements for installation/
maintenance:
FFU installation:
clean room plenum
side side
filter replacement:
clean room plenum
side side
motor replacement:
clean room plenum
side side
Brushless DC control unit replacement:
clean room plenum
side side
Fans, motors and control units
may be of Nicotra Gebhardt
standard design or they may be
specially adapted to the actual
requirements of a project.
Filter Fan Units (FFU) made by
Nicotra Gebhardt with their
perfectly matched components
are designed for various kinds of
industrial areas requiring clean
room technology.
5
4’×4’ 3’×4’ 2’×4’ 2’×2’ 2.5’×5’
FFU 1200 × 1200 4’ × 4’ 1172 1172 400
FFU 900 × 1200 3’ × 4’ 872 1172 400
FFU 600 × 1200 2’ × 4’ 572 1172 400
FFU 750 × 1500 2.5’ × 5’ 720 1470 400
FFU 600 × 600 2’ × 2’ 534 534 350
example example minimum
nominal grid sizes Wc [mm] Lc [mm] Hc [mm]
Main dimensions of the standard sizes
Using standard sizes
to adapt for special
building requirements
Casings
A system of standard sizes
makes it possible – by combining them in different ways
– to fill in every special shape
of a building and, in this way, to
create a filter fan ceiling, actively
covered by the most effective
filter fan units.
view from the plenum side
f: filter, c: casing
Other dimensions to customer’s requirements
6
0
0.1
0.2
0.3
0.4
0.5
0.6
0 50 100 150 200
Frequency
Vibration velocity