国产强伦姧在线观看无码,中文字幕99久久亚洲精品,国产精品乱码在线观看,色桃花亚洲天堂视频久久,日韩精品无码观看视频免费

ATOS    AGIU-20/210/D    油壓傳動閥
ATOS    AGRLE-10/2/PE    油壓傳動閥
ATOS    AGRL-10/WG    油壓傳動閥
ATOS    E-BM-AC-05E    油壓傳動閥
ATOS    ARAM-32/350    油壓傳動閥
ATOS    SCLI-40317    油壓傳動閥
ATOS    ARAM-32/100    油壓傳動閥
ATOS    RZGO-A-010/210    油壓傳動閥
ATOS    SCLI-40313 DN40    油壓傳動閥
ATOS    SCLI-40321    油壓傳動閥
ATOS    SCLI-40331    油壓傳動閥
ATOS    AGIR-10/210/PE    油壓傳動閥
ATOS    LIMHA-3/350 -24VDC+SP-667    油壓傳動閥
ATOS    SCLI-40316    油壓傳動閥
ATOS    RZMO-A-010/315    油壓傳動閥
ATOS    AGRLE-10    油壓傳動閥
ATOS    QV-06/16-BT    
ATOS    E-BM-AC-05F    油壓傳動閥
ATOS    E-BM-AC-05F  12/3    油壓傳動閥
ATOS    E-ME-AC-01F    油壓傳動閥
ATOS    E-ME-AC-01F   20/2    油壓傳動閥
ATOS    DK1113-50    油壓傳動閥
ATOS    RZMO-A-010/100 20    油壓傳動閥
ATOS    E-BM-AC-01F/RR    油壓傳動閥
ATOS    DK-113    油壓傳動閥
ATOS    QV-06/1/V    油壓傳動閥
ATOS    DLOH-3A/S-U/-24DC+SP-667    油壓傳動閥
ATOS    DLOH-3A/S-U/SP-667 24DC    油壓傳動閥
ATOS    AGIR-10/210    油壓傳動閥
ATOS    DLOH-3C/S-U-24DC+SP-667    油壓傳動閥

Technical datasheets available on request for additional information.
7
Optical scales  SCR 3923
Optical scales
Resolution 0.5 ?m
Grating pitch 20 ?m
Accuracy ± 3 ?m
Max. traversing speed 12 m/min
Reference indexes in required positions
Output NPN / LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
SCR W05 Resolution 0.5 ?m
Resolution 1 ?m
Grating pitch 40 ?m
Accuracy ± 3 ?m
Max. traversing speed 25 m/min
Reference indexes in required positions
Output NPN / LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
SCR W1 Resolution 1 ?m
Resolution 5 ?m
Grating pitch 40 ?m
Accuracy ± 5 ?m
Max. traversing speed 80 m/min
Reference indexes in required positions
Output NPN / LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
SCR K5 Resolution 5 ?m
Self-regulation of the grating linear extension. The compression springs damp any variation of
distance between the two A and B restraints (integral to the housing and so subject to variations
caused by its thermal expansion coef? cient, similar to that of the material used in the manufacturing of
the machines and other controlling devices). The measurements become homogenous and relative to
the temperature of 20°C (68°F).
Mounting kit of the optical scale in modular version for applications
on big-sized machines.
Example of certi? cate of metrological inspection which is supplied
with every optical scale.
A BATOS    AGIU-20/210/D    油壓傳動閥
Resolution 5 ?m
Grating pitch 20 ?m
Accuracy ± 3 ?m
Max. traversing speed 60 m/min
Reference indexes in required positions
Output NPN / LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
SCR 5 Resolution 5 ?m
Technical datasheets available on request for additional information.
8
All optical scales are supplied with a certi? cate of metrological inspection performed
in rigorous environmental and climatic conditions: T = 20°C ± 0.1°C R.H. = 45 ÷ 55 %.
Resolution 10 ?m
Grating pitch  40 ?m
Accuracy ± 2.5 ?m
Max. traversing speed 80 m/min
Measuring length  170, 220, 270, 320, … mm
Reference indexes  constant step / selectable / coded
Output LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
Electrical protections inversion of polarity and short circuit
PBS-HR T10 Resolution 10 ?m - Zero Magneto Set
PBS-HR – Self-aligned incremental optical scale
? Optical scale with stainless steel grating for applications on synchronized Press brakes.
? Self-aligned reading transducer. Resolutions up to 0.5 ?m, accuracy ± 2.5 ?m.
? Linear thermal expansion coef? cient = 10.6 x 10 -6 °C -1 suitable to the application.
? Reference indexes at coded distance or at constant step (10 mm) or selectable. The selectable zero references
and the swinging cable output make the scale SYMMETRIC and applicable, in the same version, both to the right
column and to the left column of the Press brake.
? Hybrid circuit calibrated by laser. High stability of signals (positive and negative signals from LINE DRIVER).
? Protected against inversion of power supply polarity and short circuit on output ports.
Resolution 10 ?m
Grating pitch  40 ?m
Accuracy ± 2.5 ?m
Max. traversing speed 80 m/min
Measuring length 170, 220, 270, 320, … mmATOS    AGIU-20/210/D    油壓傳動閥
Reference indexes in required positions
Output LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
Electrical protections inversion of polarity and short circuit
PBS-HR 100Z Resolution 10 ?m
Optical scales  PBS-HR
New
Technical datasheets available on request for additional information.
9
Optical scales ISA 2320
Optical scales Magnetic Scales
Optical scales  PBS-HR
PBS-HR T5 Resolution 5 ?m - Zero Magneto Set
Resolution 5 ?m
Grating pitch  20 ?m
Accuracy ± 2.5 ?m
Max. traversing speed 60 m/min
Measuring length 170, 220, 270, 320, … mm
Reference indexes constant step / selectable / coded
Output LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
Electrical protections inversion of polarity and short circuit
PBS-HR 5Z Resolution 5 ?m
Resolution 5 ?m
Grating pitch 20 ?m
Accuracy ± 2.5 ?m
Max. traversing speed 60 m/min
Measuring length 170, 220, 270, 320, … mm
Reference indexes in required positions
Output LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
Electrical protections inversion of polarity and short circuit
PBS-HR T1  PBS-HR S1 (CANopen version)
Resolution 1 ?m 1 ?m
Grating pitch 20 ?m 20 ?m
Accuracy ± 2.5 ?m ± 2.5 ?m
Max. traversing speed 40 m/min 40 m/min
Measuring length 170, 220, 270, 320, … mm 170, 220, 270, 320, … mm
Reference indexes constant step / selectable / coded not needed
Output LINE DRIVER / PUSH-PULL CANopen
Protection class IP 54 standard - IP 64 pressurized IP 54 standard - IP 64 pressurized
Electrical protections inversion of polarity and short circuit inversion of polarity and short circuit
PBS-HR T1
PBS-HR S1
Resolution 1 ?m - Zero Magneto Set
CANopen
version
PBS-HR T05 Resolution 0.5 ?m - Zero Magneto Set
Resolution 0.5 ?m
Grating pitch 20 ?m
Accuracy ± 2.5 ?m
Max. traversing speed 25 m/minATOS    AGIU-20/210/D    油壓傳動閥
Measuring length 170, 220, 270, 320, … mm
Reference indexes constant step / selectable / coded
Output LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
Electrical protections inversion of polarity and short circuit
Section of the scale
in T-version, SYMMETRIC.
Technical datasheets available on request for additional information.
10
Optical scales  GMS
?  Modular optical scale with stainless steel grating, particularly suitable for long strokes (ML up to 30040 mm).
? Rugged and heavy pro? le, in anodized aluminium.
? Coupling gaskets between the modules for a better ? t of mechanical parts (in case of disassembly
and reassembly).
? Resolutions up to 0.1 ?m. In the T version resolutions are programmable (Pr) via serial line.
? Accuracy grade ± 10 ?m.
? Linear thermal expansion coef? cient = 10.6 x 10 -6 °C -1 suitable to the application.
? Reference indexes at coded distance, or at constant step (50 mm) or selectable.
? Sine-wave or TTL signal output.
? Protected against inversion of power supply polarity and short circuit on output ports.
Sine-wave output signals from transducer.
Resolution up to 0.1 ?m
Grating pitch 40 ?m
Accuracy ± 10 ?m
Max. traversing speed 120 m/min
Measuring length up to 30040 mm at pitches of 200 mm.
Sectional modules of different lengths
Reference indexes at constant step (50 mm), selectable by a
magnet or at coded distance (80 mm)
Output sine wave 1 Vpp
Protection class IP 54 standard - IP 64 pressurized
Electrical protections inversion of polarity and short circuit
GMS V40 Sine-wave output
Resolution 10 - 5 - 2 - 1 - 0.5 ?m
Grating pitch 40 ?m
Accuracy ± 10 ?m
Max. traversing speed 120 m/min
Measuring length up to 30040 mm at pitches of 200 mm.
Sectional modules of different lengths
Reference indexes at constant step (50 mm), selectable by a
magnet or at coded distance (80 mm)
Output LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
Electrical protections inversion of polarity and short circuit
GMS T TTL output
Pr
GMS – Incremental modular optical scale
Technical datasheets available on request for additional information.
11
Optical scales ISA 2320
Optical scales
Optical scales  NCS
? Optical scale with glass measuring support. Resolutions up to 0.1 ?m. In the T version resolutions
are programmable (Pr) via serial line.
? Accuracy grade ± 3 ?m. Metrological certi? cate provided with every scale.
? Linear thermal expansion coef? cient = 8 x 10 -6 °C -1 .
? Swinging connecting cable output (connector inside the transducer).
? Reference indexes at coded distance or at constant step (40 mm) or selectable.
? High stability and quality of signals even in case of high speed, strong accelerations and vibrations.
? Protected against inversion of power supply polarity and short circuit on output ports.
Resolution up to 0.1 ?m
Grating pitch 20 ?m
Accuracy ± 3 ?m
Max. traversing speed 120 m/min
Measuring length 70 to 3240 mm
Reference indexes constant step / selectable / coded
Output sine wave 1 Vpp
Protection class IP 54 standard - IP 64 pressurized
Electrical protections  inversion of polarity and short circuit
NCS V20 Sine-wave output
Resolution 5 ?m
Grating pitch 20 ?m
Accuracy ± 3 ?m
Max. traversing speed 120 m/min
Measuring length 70 to 3240 mm
Reference indexes constant step / selectable / coded
Output LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
Electrical protections inversion of polarity and short circuit
NCS T5 TTL output  – Resolution 5 ?m
Resolution 1 ?m
Grating pitch 20 ?m
Accuracy ± 3 ?m
Max. traversing speed 120 m/min
Measuring length 70 to 3240 mm
Reference indexes constant step / selectable / coded
Output LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
Electrical protections inversion of polarity and short circuit
NCS T1 TTL output  – Resolution 1 ?m
T05 T01
Resolution 0.5 ?m 0.1 ?m
Grating pitch 20 ?m 20 ?m
Accuracy ± 3 ?m ± 3 ?m
Max. traversing speed 120 m/min 45 m/min
Measuring length 70 to 3240 mm
Reference indexes constant step / selectable / coded
Output LINE DRIVER / PUSH-PULL
Protection class IP 54 standard - IP 64 pressurized
Electrical protections inversion of polarity and short circuit
NCS T05-T01 TTL output  – Resolution 0.5-0.1 ?m
Pr
Pr
Pr
NCS – Incremental optical scale for CNC applications
Technical datasheets available on request for additional information.
12
? Reading transducer made of die-cast metallic material, of small overall dimensions.
? Stainless steel grating. Dimensions 18x0.305 mm in a single section.
? Double ? xing system of the reading transducer, horizontally or vertically.
? Very ? exible connecting cable.
? High stability of signals.
? Wide alignment tolerances.
Optical scales  NCH
NCH T10Z - W10 Resolution 10 ?m
T10Z  W10
Resolution 10 ?m 10 ?m
Grating pitch 200 ?m 400 ?m
Accuracy ± 5 ?m ± 5 ?m
Transducer-grating distance  0.5 mm  0.8 mm
Max. traversing speed 300 m/min 120 m/min
Reference indexes at constant step (50 mm)  not available
Output LINE DRIVER  LINE DRIVER / PUSH-PULL
Protection class IP 40  IP 40
NCH T5Z - W5 Resolution 5 ?m
T5Z  W5
Resolution 5 ?m 5 ?m
Grating pitch 200 ?m 200 ?m
Accuracy ± 5 ?m  ± 5 ?m
Transducer-grating distance  0.5 mm  0.5 mm
Max. traversing speed  210 m/min 120 m/min
Reference indexes at constant step (50 mm) not available
Output LINE DRIVER LINE DRIVER / PUSH-PULL
Protection class  IP 40  IP 40
NCH T1Z  Resolution 1 ?m
Resolution 1 ?m
Grating pitch  200 ?m
Accuracy ± 5 ?m
Transducer-grating distance  0.5 mm
Max. traversing speed  120 m/min
Reference indexes  at constant step (50 mm)
Output LINE DRIVER
Protection class  IP 40
NCH – Exposed incremental optical scale, with no contact
13
Without prior notice, the products may be subject to modi? cations deemed necessary for their improvement.
Magnetic scales
MTS
MTV
VI110
MP100
MP200
MP200Z
MP500
ACCESSORIES
Models
Technical datasheets available on request for additional information.
14
? MTS magnetic sensor of small overall dimensions. Resolutions up to 0.5 ?m programmable (Pr) via serial line.
? Zero references in required positions (with MP200Z only).
? Magnetic body sensor made of die-cast metallic material.
? Fixing of magnetic sensor by threaded holes M4 which can also be considered as through holes for M3 screws.
? Wide alignment tolerances.
? Protected against inversion of power supply polarity and short circuit on output ports.
Sensors, magnetic bands and covers are wrapped in a
functional package which protects them during transport.
Magnetic scales  SENSOR MTS
Pole pitch 1+1 mm
Available resolutions 10 - 5 - 1 - 0.5 ?m
Accuracy ± 10 ?m
Sensor - magnetic band gap  0.1 ÷ 0.5 (with band MP100)
Reference signal at constant pitch of 1 mm (C)
Repeatability ± 1 increment
Output LINE DRIVER / PUSH-PULL
Power supply 5 ÷ 28 Vdc ± 5%
Max. frequency 300 kHz
Max. speed 0.6 m/s (MTS P05) – 1.2 m/s (MTS P1)
Protection class IP 67
Electrical protections inversion of polarity and short circuit
MTS P Pole pitch 1+1 mm
Pole pitch  2+2 mm
Available resolutions  1000 - 500 - 100 - 50 - 25 - 10 - 5 - 1 ?m
Accuracy ± 15 ?m
Sensor - magnetic band gap  0.3 ÷ 1.5 (with band MP200)
0.35 ÷ 0.9 (with band MP200Z)
Reference signal  at constant pitch of 2 mm (C)
external (E)
positioned on the magnetic band (Z)
Repeatability ± 1 increment
Output LINE DRIVER / PUSH-PULL
Power supply  5 ÷ 28 Vdc ± 5%
Max. frequency  300 kHz
Max. speed  1.2 m/s (MTS M1) – 12 m/s (MTS M10)
Protection class  IP 67
Electrical protections  inversion of polarity and short circuit
MTS M Pole pitch 2+2 mm
Pole pitch  5+5 mm
Available resolutions 100 - 50 - 25 - 10 - 5 ?m
Accuracy ± 40 ?m
Sensor - magnetic band gap  0.3 ÷ 3.5 (with band MP500)
Reference signal  at constant pitch of 5 mm (C)
external (E)
Repeatability  ± 1 increment
Output LINE DRIVER / PUSH-PULL
Power supply  5 ÷ 28 Vdc ± 5%
Max. frequency  300 kHz
Max. speed  6 m/s (MTS H5) – 12 m/s (MTS H10)
Protection class  IP 67
Electrical protections  inversion of polarity and short circuit
MTS H Pole pitch 5+5 mm
Pr
Pr
Pr
MTS – Reading system with square-wave output
Technical datasheets available on request for additional information.
15
Optical scales ISA 2320
Magnetic scales
? MTV magnetic sensor of small overall dimensions.
? Magnetic body sensor made of die-cast metallic material.
? Fixing of magnetic sensor by threaded holes M4 which can also be considered as through holes for M3 screws.
? Wide alignment tolerances.
? Protected against inversion of power supply polarity and short circuit on output ports.
Sensor alignment tolerances.
Magnetic scales  SENSOR MTV
Pole pitch  1+1 mm
Resolution up to 0.1 ?m
Accuracy ± 10 ?m
Sensor - magnetic band gap  0.1 ÷ 0.5 (with band MP100)
Reference signal  at constant pitch of 1 mm (C)
Repeatability ± 1 increment
Output sine wave 1 Vpp
Power supply  5 ÷ 28 Vdc ± 5%
Max. frequency  12 kHz
Max. speed  12 m/s
Protection class  IP 67
Electrical protections  inversion of polarity and short circuit
MTV P Pole pitch 1+1 mm
Pole pitch  2+2 mm
Resolution up to 0.5 ?m
Accuracy ± 15 ?m
Sensor - magnetic band gap  0.3 ÷ 1.5 (with band MP200)
0.35 ÷ 0.9 (with band MP200Z)
Reference signal  at constant pitch of 2 mm (C)
external (E)
Repeatability ± 1 increment
Output sine wave 1 Vpp
Power supply  5 ÷ 28 Vdc ± 5%
Max. frequency  6 kHz
Max. speed  12 m/s
Protection class  IP 67
Electrical protections  inversion of polarity and short circuit
MTV M Pole pitch 2+2 mm
Pole pitch  5+5 mm
Resolution up to 1 ?m
Accuracy ± 40 ?m
Sensor - magnetic band gap  0.3 ÷ 3.5 (with band MP500)
Reference signal  at constant pitch of 5 mm (C)
external (E)
Repeatability ± 1 increment
Output sine wave 1 Vpp
Power supply  5 ÷ 28 Vdc ± 5%
Max. frequency  2.4 kHz
Max. speed  12 m/s
Protection class  IP 67
Electrical protections  inversion of polarity and short circuit
MTV H Pole pitch 5+5 mm
MTV – Reading system with sine-wave output (1 Vpp)
Technical datasheets available on request for additional information.
16
? One-axis digital readout with 6 ? digit LCD and negative sign.
? Metal body sensor of small overall dimensions.
? Fixing of magnetic sensor by threaded holes M4 which can also be considered as through holes for M3 screws.
? Power supply either via battery or external.
? Flexible cable max. length 4 m.
? Wide alignment tolerances.
? Several user-friendly functions available.
? Available in two different models:
? VISION 110S: body sensor and front suitable for standard drilling template (92x44 mm).
? VISION 110L: body sensor of standard dimensions and front of bigger size, for mounting on panel with drilling
template 92x66 mm, or adjustable for standard drilling template (92x44 mm).
? To be used with magnetic band MP200 or MP100.
Magnetic scales  DIGITAL READOUT VI110
Suitable for drilling template (lxh)  92x44 mm
Display 6 ? digits h = 13 mm
Programmable resolutions  1 - 0.1 - 0.05 - 0.01 mm
0.01 - 0.001 - 1/16 - 1/32 - 1/64 inches
1° - 0.1° - 0.01° - 0.001° angular
Power supply  3 V (2 LR6 AA batteries)
1.5 ÷ 5 V (external)
In combination with magnetic band MP100  MP200
Pole pitch  1+1 mm  2+2 mm
Max. counting speed  2 m/sec  4 m/sec
Sensor - magnetic band gap  0.1 ÷ 0.4 mm  0.3 ÷ 2 mm
Accuracy ± 15 ?m  ± 20 ?m
Protection class of sensor  IP 67  IP 67
Suitable for drilling template (lxh)  92x44 mm and 92x66 mm
Display 6 ? digits h = 13 mm
Programmable resolutions  1 - 0.1 - 0.05 - 0.01 mm
0.01 - 0.001 - 1/16 - 1/32 - 1/64 inches
1° - 0.1° - 0.01° - 0.001° angular
Power supply  3 V (2 LR6 AA batteries)
1.5 ÷ 5 V (external)
In combination with magnetic band MP100  MP200
Pole pitch  1+1 mm  2+2 mm
Max. counting speed  2 m/sec  4 m/sec
Sensor - magnetic band gap  0.1 ÷ 0.4 mm  0.3 ÷ 2 mm
Accuracy ± 15 ?m  ± 20 ?m
Protection class of sensor  IP 67  IP 67
VI110 S Small version
VI110 L Large version
VI110 – Single-axis digital readout with magnetic sensor
Magnetic scales
Technical datasheets available on request for additional information.
17
Magnetic scales MAGNETIC BAND
? Magnetic band composed by a magnetized plastoferrite strip, supported by a stainless steel
carrier on which a bi-adhesive tape is pre-mounted. Extremely quick sticking and easy ? xing.
Every magnetic band is supplied with
a certi? cate of metrological inspection.
Pole pitch  1+1 mm (for sensor mod. MTS P or MTV P)
Accuracy at 20°C  ± 30 ?m/m standard ± 15 ?m/m special
Width  10 mm
Thickness 1.3 mm
Max. length  50 m
Minimum bending radius  130 mm
Magnetic band weight  65 g/m
Cover weight  25 g/m
MP100 Pole pitch 1+1 mm
Pole pitch  2+2 mm (for sensor mod. MTS M or MTV M)
Accuracy at 20°C  ± 30 ?m/m standard ± 15 ?m/m special
Width  10 mm
Thickness 1.3 mm
Max. length  50 m
Minimum bending radius  130 mm
Magnetic band weight  65 g/m
Cover weight  25 g/m
Accessories stainless steel cover for protection CV103
aluminium support SP202
MP200 Pole pitch 2+2 mm
Pole pitch  2+2 mm (for sensor mod. MTS MxxZ)
Reference indexes  positioned upon request, from left or right,
at pitches of 4 mm or multiples
Accuracy at 20°C  ± 30 ?m/m standard ± 15 ?m/m special
Width  10 mm
Thickness 1.3 mm
Max. length  50 m
Minimum bending radius  130 mm
Magnetic band weight  65 g/m
Cover weight  25 g/m
Accessories stainless steel cover for protection CV103
aluminium support SP202
MP200Z Pole pitch 2+2 mm –  With zero ref.
Pole pitch  5+5 mm (for sensor mod. MTS H or MTV H)
Accuracy at 20°C  ± 30 ?m/m standard ± 15 ?m/m special
Width  10 mm
Thickness 1.3 mm
Max. length  25 m
Minimum bending radius  130 mm
Magnetic band weight  65 g/m
Cover weight  25 g/m
Accessories stainless steel cover for protection CV103
aluminium support SP202
MP500 Pole pitch 5+5 mm
MP – Magnetic bands for MTS and MTV sensors
Technical datasheets available on request for additional information.
18
One of the production phases of the magnetic band, whose manufacturing
know-how has been directly developed by GIVI MISURE.
ACCESSORIES – Cover and support
CV103 Stainless steel cover for protection
Non-magnetic stainless steel cover on which a bi-adhesive tape is pre-mounted for a quick sticking and an easy
? xing to the magnetic band.
Width 10 mm – Thickness 0.3 mm.
To be applied on magnetic tapes
MP200 – MP200Z – MP500.
SP202 Aluminium support
To be ? xed on the machine to support
the magnetic band.
ATTENTION! It is not possible to use the
support SP202 if the magnetic bands
are already covered by CV103.
CV103
MP200 - MP200Z - MP500
SP202
MP200 - MP200Z - MP500
Magnetic scales  ACCESSORIES
19
Without prior notice, the products may be subject to modi? cations deemed necessary for their improvement.
Rotary encoders
EN58
EN38
EPC
EN413
VN413 FQ – VN413 FT
ACCESSORIES
Models
Technical datasheets available on request for additional information.
20
The manufacturing quality of optical discs
guarantees the high precision of encoders.
? Incremental rotary encoder based on optical principle.
? Small overall dimensions for installation on small
machine-tools.
? Wide range of pulses/rev. up to 64000 ppr.
? Bidirectional signals with zero references.
? Output by connector or cable, radial or axial position.
? Ring for high protection.
? Housing and body made of aluminium.
? High rotational precision.
? Excellent signal stability.
? Protected against inversion of power supply polarity
and short circuit on output ports.
? Wide range of features.
? Custom-built features on request.
Available pulses  5 ÷ 64000 ppr
Max. rotating speed  moment. 12000 rpm permanent 8000 rpm
Centering ? 36 mm
Fixing no. 3 screws M4 at 120°
Shaft ? mm  6 - 8 - 9.52 - 10 - 12 - 14 - 15 others on request
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Protection class  IP 65
Output LINE DRIVER / PUSH-PULL / OPEN COLLECTOR
Max. frequency  300 kHz
Electrical protections  inversion of polarity and short circuit
EN58 SC Semi-hollow shaft
Rotary encoders  EN58
Available pulses  5 ÷ 64000 ppr
Max. rotating speed  moment.12000 rpm permanent 8000 rpm
Centering ?  50 mm
Fixing no. 3 screws M4 at 120°
Shaft ? mm  6x10 - 8x20 - 9.52x20 - 10x20 others on request
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Protection class  IP 65 or IP 67 (optional)
Output LINE DRIVER / PUSH-PULL / OPEN COLLECTOR
Max. frequency  300 kHz
Electrical protections  inversion of polarity and short circuit
EN500 Centering ? 50 mm
Available pulses  5 ÷ 64000 ppr
Max. rotating speed  moment. 12000 rpm permanent 8000 rpm
Centering ?  80 mm
Fixing no. 3 screws M5 at 120°
Shaft ? mm  8x20 - 9.52x20 - 10x20 others on request
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Protection class  IP 65 or IP 67 (optional)
Output LINE DRIVER / PUSH-PULL / OPEN COLLECTOR
Max. frequency  300 kHz
Electrical protections  inversion of polarity and short circuit
EN590 Flange ? 90 mm
EN58 – Incremental encoders ? 58 mm
Rotary encoders
Technical datasheets available on request for additional information.
21
Rotary encoders  EN58
Available pulses  5 ÷ 64000 ppr
Max. rotating speed  moment. 12000 rpm permanent 8000 rpm
Centering ?  31.75 mm
Fixing no. 4 holes ? 5.5 mm
Shaft ? mm  6x10 - 8x20 - 9.52x20 - 10x20 others on request
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Protection class  IP 65 or IP 67 (optional)
Output LINE DRIVER / PUSH-PULL / OPEN COLLECTOR
Max. frequency  300 kHz
Electrical protections  inversion of polarity and short circuit
EN600 Centering ? 31.75 mm
Available pulses  5 ÷ 64000 ppr
Max. rotating speed  moment. 12000 rpm permanent 8000
Centering ?  31.75 mm
Fixing no. 3 screws M5 at 120°
Shaft ? mm  6x10 - 8x20 - 9.52x20 - 10x20 others on request
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Protection class  IP 65 or IP 67 (optional)
Output LINE DRIVER / PUSH-PULL / OPEN COLLECTOR
Max. frequency  300 kHz
Electrical protections  inversion of polarity and short circuit
EN531 Centering ? 31.75 mm
Available pulses  5 ÷ 64000 ppr
Max. rotating speed  moment. 12000 rpm permanent 8000 rpm
Centering ?  36 mm
Fixing no. 3 screws M3 at 120°
Shaft ? mm  6x10 - 8x20 - 9.52x20 - 10x20 others on request
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Protection class  IP 65 or IP 67 (optional)
Output LINE DRIVER / PUSH-PULL / OPEN COLLECTOR
Max. frequency  300 kHz
Electrical protections  inversion of polarity and short circuit
EN536 Centering ? 36 mm
Available pulses  5 ÷ 64000 ppr
Max. rotating speed  moment. 12000 rpm permanent 8000 rpm
Centering ?  50 mm
Fixing no. 3 screws M5 at 120°
Shaft ? mm  6x10 - 8x20 - 9.52x20 - 10x20 others on  request
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Protection class  IP 65 or IP 67 (optional)
Output LINE DRIVER / PUSH-PULL / OPEN COLLECTOR
Max. frequency  300 kHz
Electrical protections  inversion of polarity and short circuit
EN5036 Centering ? 50 mm
Available pulses  5 ÷ 64000 ppr
Max. rotating speed  moment. 12000 rpm permanent 8000 rpm
Centering ?  50 mm
Fixing no. 4 holes ? 5.5 mm
Shaft ? mm  6x10 - 8x20 - 9.52x20 - 10x20 others on request
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Protection class  IP 65 or IP 67 (optional)
Output LINE DRIVER / PUSH-PULL / OPEN COLLECTOR
Max. frequency  300 kHz
Electrical protections  inversion of polarity and short circuit
EN650 Centering ? 50 mm
Technical datasheets available on request for additional information.
22
? High-precision, small-sized incremental rotary encoders based on optical principle.
? Output by sealed cable in radial or axial position.
? High degree of robustness. Flange, body and housing made of aluminium.
? Excellent rotational precision and signal stability.
? Protected against inversion of power supply polarity and short circuit on output ports.
Rotary encoders  EN38
Available pulses  5 ÷ 3600 ppr
Max. rotating speed  moment. 8000 rpm permanent 6000 rpm
Centering ?  33 mm
Fixing no. 4 screws M3 at 90°
Shaft ? mm  6 - 8
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Protection class  IP 65 or IP 67 (optional)
Output LINE DRIVER / PUSH-PULL
Max. frequency  120 kHz
Electrical protections  inversion of polarity and short circuit
EN38 ON Standard ? xing
Available pulses  5 ÷ 3600 ppr
Max. rotating speed  moment. 8000 rpm permanent 6000 rpm
Centering ?  20 mm
Fixing no. 3 screws M3 at 120° no. 4 screws M3 at 90°
Shaft ? mm  6 - 8
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Protection class  IP 65 or IP 67 (optional)
Output LINE DRIVER / PUSH-PULL
Max. frequency  120 kHz
Electrical protections  inversion of polarity and short circuit
EN38 MN Double ? xing system
Available pulses  5 ÷ 3600 ppr
Max. rotating speed  moment. 8000 rpm permanent 6000 rpm
Fixing by threaded nut M18x1
Shaft ? mm  6 - 8
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Protection class  IP 65 or IP 67 (optional)
Output LINE DRIVER / PUSH-PULL
Max. frequency  120 kHz
Electrical protections  inversion of polarity and short circuit
EN38 FN Fixing by threaded nut
Available pulses  5 ÷ 3600 ppr
Max. rotating speed  moment. 8000 rpm permanent 6000 rpm
Centering ?  20 mm
Fixing no. 4 holes ? 3.2 mm
Shaft ? mm  6 - 8
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Protection class  IP 65 or IP 67 (optional)
Output LINE DRIVER / PUSH-PULL
Max. frequency  120 kHz
Electrical protections  inversion of polarity and short circuit
EN38 BB With square ? ange
EN38 – Incremental encoders ? 38 mm
Rotary encoders
Technical datasheets available on request for additional information.
23
Rotary encoders  OTHER MODELS
Available pulses  5 ÷ 2500 ppr
Fixing no. 4 screws M6
Shaft ? mm  8 - 10
Connector output  axial - radial
Thrust spring positioning  left - right
Power supply  5 V ± 5% or 12 ÷ 24 V ± 5%
Output LINE DRIVER / PUSH-PULL
Max. frequency  100 kHz
EPC Rack and pinion encoder
Available pulses  50 ÷ 500 ppr
Max. rotating speed  6000 rpm
Centering ?  20 mm
Fixing no. 2 screws M4
Hollow shaft ? mm  6
Cable output  radial
Power supply  5 V ± 5% or 12 ÷ 24 V ± 5%
Protection class  IP 40
Output LINE DRIVER / PUSH-PULL
Max. frequency  50 kHz
EN413 Incremental encoder ? 41.3 mm
Available pulses  50 - 100 - 500 ppr
Fixing no. 4 ? at head screws M5
Cable output  radial
Connection cable - terminal board
Power supply  5 V ± 5% or 12 ÷ 24 V ± 5%
Protection class  IP 40
Output LINE DRIVER
Max. frequency  50 kHz
VN413 FQ Electronic handwheel - square ? ange
Available pulses  50 - 100 - 500 ppr
Fixing no. 3 screws M4x10 at 120°
Cable output  radial
Connection cable - terminal board
Power supply  5 V ± 5% or 12 ÷ 24 V ± 5%
Protection class  IP 40
Output LINE DRIVER
Max. frequency  50 kHz
VN413 FT Electronic handwheel - round ? ange
Technical datasheets available on request for additional information.
24
Smooth rubber surface
Knurled rubber surface
Smooth rubber surface
Knurled rubber surface
Rotary encoders  ACCESSORIES
Wheel circumference  200 mm
Available pulses  5 ÷ 64000 ppr
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Output LINE DRIVER / PUSH-PULL / OPEN COLLECTOR
Protection class  IP 65 or IP 67 (optional)
Cable - connector  m 1/2/3/...cable - connector 7/10/12 pins
Weight  320 + 100 g
Type of rubber  smooth - knurled
Accessories supporting arm
SV200 Metric wheel circumference 200 mm
Wheel circumference  500 mm
Available pulses  5 ÷ 64000 ppr
Power supply  5 V ± 5% or 5 ÷ 28 V ± 5%
Output LINE DRIVER / PUSH-PULL / OPEN COLLECTOR
Protection class  IP 65 or IP 67 (optional)
Cable - connector  m 1/2/3/...cable - connector 7/10/12 pins
Weight  320 + 280 g
Type of rubber  smooth - knurled
Accessories supporting arm
SV500 Metric wheel circumference 500 mm
ACCESSORIES – Metric wheels and supports
Rotary encoders
Technical datasheets available on request for additional information.
25
Dimensions (D x L) Hole diameter
Hole diameter
Fixing  Max Tm
(d1 0 ÷ 0.05)  (d2 0 ÷ 0.05)
20x20 mm  6 mm  6 mm  no. 4 screws M3  1.1 Nm
20x20 mm  8 mm  8 mm  no. 4 screws M3  1.0 Nm
25x24 mm 6 mm  6 mm  no. 4 screws M4  2.9 Nm
25x24 mm  8 mm  8 mm  no. 4 screws M4  2.6 Nm
25x24 mm  9.52 mm  9.52 mm  no. 4 screws M4  2.2 Nm
25x24 mm  10 mm  10 mm  no. 4 screws M4  2.2 Nm
Rotary encoders  ACCESSORIES
Dimensions (D x L) Hole diameter
Shaft
Fixing  Max Tm
(d1 0 ÷ 0.05)  diameter (d)
26x28 mm  6 - 8 mm  18 mm  no. 2 screws M3  0.3 Nm
48x48 mm  10 - 12 mm  25 mm  no. 2 screws M4  1.3 Nm
Dimensions (D x L)
Hole diameter
Fixing  Max Tm
(d1 0 ÷ 0.05)
16x35 mm 6 - 8 - 10 mm  no. 2 screws M4  1.0 Nm
HELI-CAL  coupling
SPRING coupling
PGFX coupling
Dimensions (D x L)
Hole diameter
Fixing  Max Tm
(d1 0 ÷ 0.05)
16x35 mm  6 - 8 - 10 mm  no. 4 screws M4  1.0 Nm
OLDHAM coupling
ACCESSORIES – Shaft-encoder couplings
26
Without prior notice, the products may be subject to modi? cations deemed necessary for their improvement.
Digital readouts
ME510
ME518
ME600
ME800
VI700
VI900
ACCESSORIES
Models
Technical datasheets available on request for additional information.
27
Digital readouts MERIT 510
Digital readouts
? Up to 6 digits displayed, with ? oating decimal point.
? Resolutions up to 1 ?m.
? Internal rewritable memory (no buffer battery required).
? Correction factor, midpoint calculation, relay output and many other functions available.
? Applicable on several machine-tools performing cuttings or machining at a preset size,
polishing, bending, grinding, straightening, etc., in several sectors, such as: wood, sheet
metal, marble, textile, rubber, etc. processing machines.
? SELF-TEST  ? INVERSION OF COUNTING DIRECTION
? PRESETTING LOAD QUOTA  ? MIDPOINT CALCULATION
? RESETTING/PRESETTING OF A DIMENSION  ? SETTING LOAD QUOTA
? VARIABLE RESOLUTION  ? MEMORY CLEARING
? MM/INCH CONVERSION MODE  ? LINEAR CORRECTION
? ABS/INC COUNTING  ? ANGULAR READING
? SCALE ZERO REF.  ? RELAY OUTPUT ACTIVATION (opt.)
? DISABLING OF SCALE ZERO REF.  ? SETTING OF RELAY QUOTA (opt.)
? COUNTING MODE
MAIN FUNCTIONS ME510
ME510 Standard version
Display 6 high-ef? ciency digits h = 17 mm
Signal input  2 square waves out of phase 90° ± 5° and zero ref.
5 Vdc or 12 Vdc
Power supply  230 Vac ± 10% - 50/60 Hz 30 mA
110 Vac ± 10% - 60 Hz 60 mA
24 Vac ± 10% - 50/60 Hz 300 mA
Memory permanent for con? guration and “user” settings
(last data operating memory)
Available resolutions  100 - 50 - 20 - 10 - 5 - 2 - 1 ?m
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0.01°
ME510 UR2 – ME510 S Version with options
Display 6 high-ef? ciency digits h = 17 mm
Signal input  2 square waves out of phase 90° ± 5° and zero ref.
5 Vdc or 12 Vdc
Power supply  230 Vac ± 10% - 50/60 Hz 30 mA
110 Vac ± 10% - 60 Hz 60 mA
24 Vac ± 10% - 50/60 Hz 300 mA
Memory  permanent for con? guration and “user” settings
(last data operating memory)
Available resolutions  100 - 50 - 20 - 10 - 5 - 2 - 1 ?m
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0.01°
Options serial output RS-232
relay output
static relay AC - static relay DC
ME510 – Single-axis digital readout
Technical datasheets available on request for additional information.
28
? Up to 7 digits displayed, with ? oating decimal point.
? Resolutions up to 0.5 ?m.
? Internal rewritable memory (no buffer battery required).
? Correction factor, midpoint calculation, relay output and many other functions available.
? Applicable on several machine-tools performing cuttings or machining at a preset size,
polishing, bending, grinding, straightening, etc., in several sectors such as: wood, sheet
metal, marble, textile, rubber, etc. processing machines.
Digital readouts  MERIT 518
? SELF-TEST ? RADIUS/DIAMETER CONVERSION
? PRESETTING LOAD QUOTA  ? MIDPOINT CALCULATION
? RESETTING/PRESETTING OF A DIMENSION  ? SETTING LOAD QUOTA
? VARIABLE RESOLUTION  ? MEMORY CLEARING
? MM/INCH CONVERSION MODE  ? LINEAR CORRECTION
? ABS/INC COUNTING  ? ANGULAR READING
? SCALE ZERO REF.  ? RELAY OUTPUT ACTIVATION (opt.)
? DISABLING OF SCALE ZERO REF.  ? SETTING OF RELAY QUOTA (opt.)
? COUNTING MODE  ? SEXAGESIMAL DEGREES READING
? INVERSION OF COUNTING DIRECTION
MAIN FUNCTIONS ME518
ME518 Standard version
Display 7 high-ef? ciency digits h = 13 mm
Signal input  2 square waves out of phase 90° ± 5° and zero ref.
5 Vdc or 12 Vdc
Power supply  230 Vac ± 10% - 50/60 Hz 30 mA
110 Vac ± 10% - 60 Hz 60 mA
24 Vac ± 10% - 50/60 Hz 300 mA
Memory  permanent for con? guration and “user” settings
(last data operating memory)
Available resolutions  200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 ?m
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0.01°
0.005° - 0.002° - 0.001°
ME518 UR2 – ME518 S Version with options
Display  7 high-ef? ciency digits h = 13 mm
Signal input  2 square waves out of phase 90° ± 5° and zero ref.
5 Vdc or 12 Vdc
Power supply  230 Vac ± 10% - 50/60 Hz 30 mA
110 Vac ± 10% - 60 Hz 60 mA
24 Vac ± 10% - 50/60 Hz 300 mA
Memory  permanent for con? guration and “user” settings
(last data operating memory)
Available resolutions  200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 ?m
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0.01°
0.005° - 0.002° - 0.001°
Options  serial output RS-232
relay output
static relay AC - static relay DC
ME518 – Single-axis digital readout, with 7-digit display
Technical datasheets available on request for additional information.
29
Digital readouts MERIT 600
Digital readouts
ME600 – Multi-axis digital readout, without auxiliary display
? Up to 3 axes displayed, up to 4 input axes.
? 7-digit display h = 17 mm.
? Variable resolution, selectable up to 0.5 ?m.
? Tactile watertight front keyboard, protected against electrostatic discharges.
? Easy and immediate use thanks to dedicated keys and coded functions.
? Acoustic and visual signals guiding the operator.
? Excellent operating reliability.
? High versatility: applicable on different types of machine-tools, since it is keyboard-programmed.
? Options available, such as relay outputs and serial output.
2-axis version
3-axis version
? SELF-TEST/ MANUAL TEST  ? ABS/INC COUNTING
? MIDPOINT CALCULATION  ? SCALE ZERO REF.
? MEMORY CLEARING  ? 100 OFFSET TOOL SELECTION
? CONSTANT PITCH  ? VARIABLE RESOLUTION
? INVERSION OF COUNTING DIRECTION  ? RADIUS/DIAMETER CONVERSION
? RESETTING/PRESETTING OF A DIMENSION  ? SCALE FACTOR
? MM/INCH CONVERSION MODE  ? LINEAR CORRECTION
? ANGULAR READING  ? AXIS COUPLING
? SEXAGESIMAL DEGREES READING
MAIN FUNCTIONS ME600
ME622 – ME623 With 2 displays
Display 7 high-ef? ciency digits h = 17 mm
Input axes  2 - 3
Applicable to  lathe - milling machine - boring machine - etc.
Signal input per axis  2 square waves out of phase 90° ± 5° and zero ref.
5 Vdc or 12 Vdc
Power supply  230 Vac ± 10% - 50/60 Hz 30 mA
110 Vac ± 10% - 60 Hz 60 mA
24 Vac ± 10% - 50/60 Hz 300 mA
Memory  permanent for con? guration and special functions
Available resolutions  200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 ?m
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0.01°
0.005° - 0.002° - 0.001°
Protection class  keyboard IP 67 rear panel IP 42
Options  relay outputs (1/2/3)
serial output RS-232
standard autonomy battery 1.5 h
double autonomy battery 3 h
ME633 – ME634 With 3 displays
Display 7 high-ef? ciency digits h = 17 mm
Input axes  3 - 4
Applicable to  lathe - milling machine - boring machine - etc.
Signal input per axis  2 square waves out of phase 90° ± 5° and zero ref.
5 Vdc or 12 Vdc
Power supply  230 Vac ± 10% - 50/60 Hz 30 mA
110 Vac ± 10% - 60 Hz 60 mA
24 Vac ± 10% - 50/60 Hz 300 mA
Memory  permanent for con? guration and special functions
Available resolutions  200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 ?m
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0.01°
0.005° - 0.002° - 0.001°
Protection class  keyboard IP 67 rear panel IP 42
Options relay outputs (1/2/3)
serial output RS-232
standard autonomy battery 1.5 h
double autonomy battery 3 h
Technical datasheets available on request for additional information.
30
? Up to 3 axes displayed, up to 4 input axes.
? Auxiliary back-lit LCD display.
? 7-digit main display h = 17 mm.
? Variable resolution, selectable up to 0.5 ?m.
? Tactile watertight front keyboard, protected against electrostatic discharges.
? Easy and immediate use thanks to dedicated keys and coded functions.
? Acoustic and visual signals guiding the operator.
? Excellent operational reliability.
? High versatility: applicable to different types of machine-tools, since it is keyboard-programmed.
? Options available, such as relay outputs and serial output.
? Special cover made of shockproof expanded tecnopolymer with conductive treatment
for protection against interference.
? Circuit engineered in order to eliminate any kind of harness or hard wiring.
? Strict selection of components after at least 1000 h of BURN-IN cycles.
All the instrumentation is power supplied and undergoes a burn-in
process, for at least 1000 h, at 50°C. Inside the instrument, the apex
temperature is 70÷75°C.
2-axis version
Digital readouts  MERIT 800
ME822 – ME823 With 2 displays
Display 7 high-ef? ciency digits h = 17 mm
Input axes  2 - 3
Applicable to  lathe - milling machine - boring machine - etc.
Signal input per axis  2 square waves out of phase 90° ± 5° and zero ref.
5 Vdc or 12 Vdc
Power supply  230 Vac ± 10% - 50/60 Hz 30 mA
110 Vac ± 10% - 60 Hz 60 mA
24 Vac ± 10% - 50/60 Hz 300 mA
Memory  permanent for con? guration and special functions
Available resolutions  200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 ?m
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0. 01° - 0.005°
0.002° - 0.001°
Protection class  keyboard IP 67 rear panel IP 42
Options relay outputs (1/2/3)
serial output RS-232
standard autonomy battery 1.5 h
double autonomy battery 3 h
constant cut output
ME800 – Multi-axis digital readout, with auxiliary LCD display
Technical datasheets available on request for additional information.
31
Digital readouts MERIT 800
Digital readouts
3-axis version
ME833 – ME834 With 3 displays
Display 7 high-ef? ciency digits h = 17 mm
Input axes  3 - 4
Applicable to  lathe - milling machine - boring machine - etc.
Signal input per axis  2 square waves out of phase 90° ± 5° and zero ref.
5 Vdc or 12 Vdc
Power supply  230 Vac ± 10% - 50/60 Hz 30 mA
110 Vac ± 10% - 60 Hz 60 mA
24 Vac ± 10% - 50/60 Hz 300 mA
Memory  permanent for con? guration and special functions
Available resolutions  200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 ?m
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02° - 0. 01° - 0.005°
0.002° - 0.001°
Protection class keyboard IP 67 rear panel IP 42
Options relay outputs (1/2/3)
serial output RS-232
standard autonomy battery 1.5 h
double autonomy battery 3 h
constant cut output
MAIN FUNCTIONS
? SELF-TEST/MANUAL TEST
? MIDPOINT CALCULATION
? MEMORY CLEARING
? CONSTANT PITCH
? INVERSION OF COUNTING DIRECTION
? RESETTING/PRESETTING OF A DIMENSION
? MM/INCH CONVERSION MODE
? ANGULAR READING
? SEXAGESIMAL DEGREES READING
? ABS/INC COUNTING
? SCALE ZERO REF.
? 100 OFFSET TOOL SELECTION
? VARIABLE RESOLUTION
? RADIUS/DIAMETER CONVERSION
? SCALE FACTOR
? LINEAR CORRECTION
? AXIS COUPLING
? CALCULATOR
? LANGUAGE SELECTION
? ROUND FLANGE
? WEIGHT OF MATERIALS CALCULATION
? CIRCUMFERENCE CENTER
? MIRROR IMAGE
? 100 ORIGINS
? CONE INCLINATION CALCULATION
? THREAD CALCULATION
? TIP SPEED CALCULATION
? ROTATION SPEED CALCULATION
? RELAY OUTPUT
? SERIAL OUTPUT RS-232
? CONSTANT CUT
SPECIAL FUNCTIONS
Technical datasheets available on request for additional information.
32
? Compact-designed, modern, functional digital readout.
? Diagnostic of readout and optical scales.
? Resolutions up to 0.5 ?m.
? Reading of coded references (in combination with NCS scale).
? Universal software for any kind of machine tool.
? Software upgrade through serial port.
? Program store for 1000 blocks.
? Option: ? ush-mounted version (on a panel).
? Easy and immediate use of several dedicated functions.
2-axis version
3-axis version with LCD
Digital readouts  VISION 700
VI722 – VI723 With 2 displays
Display 7 high-ef? ciency digits h = 17 mm
Signal input per axis  2 square waves out of phase 90° ± 5°
and synchronized index
Available resolutions  200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 ?m
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02°
0.01° - 0.005° - 0.002° - 0.001°
Readout protection  keyboard IP 67 rear panel IP 42
Input axes  2 - 3
Applicable to  lathe - milling machine - boring machine - etc.
LCD with LCD / without LCD
Power supply  230 Vac ± 10% - 50/60 Hz 50 mA
110 Vac ± 10% - 60 Hz 100 mA
24 Vac ± 10% - 50/60 Hz 450 mA
Version  standard or ? ush-mounted
VI733L – VI734L With 3 displays and LCD
Display 7 high-ef? ciency digits h = 17 mm
Signal input per axis  2 square waves out of phase 90° ± 5°
and synchronized index
Available resolutions  200 - 100 - 50 - 20 - 10 - 5 - 2 - 1 - 0.5 ?m
1° - 0.5° - 0.2° - 0.1° - 0.05° - 0.02°
0.01° - 0.005° - 0.002° - 0.001°
Readout protection  keyboard IP 67 rear panel IP 42
Input axes  3 - 4
Applicable to  lathe - milling machine - boring machine - etc.
Power supply  230 Vac ± 10% - 50/60 Hz 50 mA
110 Vac ± 10% - 60 Hz 100 mA
24 Vac ± 10% - 50/60 Hz 450 mA