国产强伦姧在线观看无码,中文字幕99久久亚洲精品,国产精品乱码在线观看,色桃花亚洲天堂视频久久,日韩精品无码观看视频免费

DOLD     AA7562.32/001 DC24V 觸點AC250 2A    

    Low Voltage (<50V) Enclosed
GSD1-48-10N4X    IronHorse DC drive, 12-48 VDC input, 1-phase, 1/50 to 1/8 hp 12 VDC and 1/12 to 1/2 hp 48 VDC, 10A maximum output current, NEMA 4X enclosure, PWM output, 0-10 VDC or potentiometer control input, output up to input voltage, field installed reverse switch, speed potentiometer, includes knob and 0-* dial, ON/OFF Switch, screw terminals. For use with Permanent Magnet (PM) DC and universal motors. 流量計DOLD     AA7562.32/001 DC24V 觸點AC250 2A    
GSD3-24A-3N4    IronHorse DC drive, 12/24 VAC input, 1-phase, 1/50 to 1/25 hp 12 VDC and 1/25 to 1/12 hp 24 VDC, 3A maximum output current, NEMA 4 enclosure, SCR output, potentiometer control input, output up to input voltage, field installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, ON/OFF Switch, 1/4 inch quick-disconnect. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
    High Voltage (>50V) Open Frame
GSD4-240-1C    IronHorse DC drive, 120/240 VAC input, 1-phase, 1/50 to 1/8 hp 90 VDC and 1/25 to 1/4 hp 180 VDC, 1.2A maximum output current, open frame enclosure, SCR output, 0-10 VDC/0-250 VDC or potentiometer control input, output up to 90 VDC/up to 180 VDC, field installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
GSD6-240-15C    IronHorse DC drive, 120/240 VAC input, 1-phase, 1/8 to 1.5 hp 90 VDC and 1/4 to 3 hp 180 VDC, 15A maximum output current, open frame enclosure, PWM output, 0-12 VDC or potentiometer control input, output up to 90 VDC/up to 180 VDC, field installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
GSD3-240-2CL    IronHorse DC drive, 120/240 VAC input, 1-phase, 1/50 to 1/6 hp 90 VDC and 1/25 to 1/3 hp 180 VDC, 2A maximum output current, open frame enclosure, SCR output, potentiometer control input, L style mounting, output up to 90 VDC/up to 180 VDC, field installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, 1/4 inch quick-disconnect. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors. Drive can output 4A if mounted to an appropriate heatsink (minimum 4 x 4 x 1/8 inch aluminum).
GSD3-240-2CJ    IronHorse DC drive, 120/240 VAC input, 1-phase, 1/50 to 1/6 hp 90 VDC and 1/25 to 1/3 hp 180 VDC, 2A maximum output current, open frame enclosure, SCR output, potentiometer control input, J style mounting, output up to 90 VDC/up to 180 VDC, field installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, 1/4 inch quick-disconnect. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors. Drive can output 4A if mounted to an appropriate heatsink (minimum 4 x 4 x 1/8 inch aluminum).
GSD4-240-5C    IronHorse DC drive, 120/240 VAC input, 1-phase, 1/8 to 1/2 hp 90 VDC and 1/4 to 1 hp 180 VDC, 5.5A maximum output current, open frame enclosure, SCR output, 0-10 VDC/0-250 VDC or potentiometer control input, output up to 90 VDC/up to 180 VDC, field installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors. Drive can output 10A if mounted to GSDA-HTSNK-4 heatsink.
GSD5-240-10C    IronHorse DC drive, 120/240 VAC input, 1-phase, 1/8 to 1 hp 90 VDC and 1/4 to 2 hp 180 VDC, 10.8A maximum output current, open frame enclosure, SCR output, 0-10 VDC or potentiometer control input, output up to 90 VDC/up to 180 VDC, field installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
    High Voltage (>50V) Enclosed 流量計DOLD     AA7562.32/001 DC24V 觸點AC250 2A    
GSD3-240-3N4    IronHorse DC drive, 120/240 VAC input, 1-phase, 1/50 to 1/3 hp 90 VDC and 1/25 to 2/3 hp 180 VDC, 3A maximum output current, NEMA 4 enclosure, SCR output, potentiometer control input, output up to 90 VDC/up to 180 VDC, field installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, ON/OFF Switch, 1/4 inch quick-disconnect. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
GSD4-240-10N4X    IronHorse DC drive, 120/240 VAC input, 1-phase, 1/8 to 1 hp 90 VDC and 1/4 to 2 hp 180 VDC, 10.8A maximum output current, NEMA 4X enclosure, SCR output, 0-10 VDC or potentiometer control input, output up to 90 VDC/up to 180 VDC, field installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, ON/OFF Switch, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
GSD5-240-10N4    IronHorse DC drive, 120/240 VAC input, 1-phase, 1/8 to 1 hp 90 VDC and 1/4 to 2 hp 180 VDC, 10.8A maximum output current, NEMA 4 enclosure, SCR output, 0-10 VDC or potentiometer control input, output up to 90 VDC/up to 180 VDC, field installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, ON/OFF Switch, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
GSD5-240-10N4-R    IronHorse DC drive, 120/240 VAC input, 1-phase, 1/8 to 1 hp 90 VDC and 1/4 to 2 hp 180 VDC, 10.8A maximum output current, NEMA 4 enclosure, SCR output, 0-10 VDC or potentiometer control input, output up to 90 VDC/up to 180 VDC, pre-installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, ON/OFF Switch, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
GSD5-240-10N4-A    IronHorse DC drive, 120/240 VAC input, 1-phase, 1/8 to 1 hp 90 VDC and 1/4 to 2 hp 180 VDC, 10.8A maximum output current, NEMA 4 enclosure, SCR output, 4-20 mA control input, output up to 90 VDC/up to 180 VDC, field installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, ON/OFF Switch, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
GSD5-240-10N4-V    IronHorse DC drive, 120/240 VAC input, 1-phase, 1/8 to 1 hp 90 VDC and 1/4 to 2 hp 180 VDC, 10.8A maximum output current, NEMA 4 enclosure, SCR output, 0-10 VDC or potentiometer control input, output up to 90 VDC/up to 180 VDC, field installed reverse switch, shunt field supply, speed potentiometer, includes knob and 0-* dial, ON/OFF Switch, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors. 流量計DOLD     AA7562.32/001 DC24V 觸點AC250 2A     流量計DOLD     AA7562.32/001 DC24V  
    High Voltage (>50V) Open Frame Auto Reversing
GSD7-120-1CR3    IronHorse DC drive, 120 VAC input, 1-phase, 1/15 to 1/8 hp 90 VDC, 1.2A maximum output current, open frame enclosure, SCR output, 0-10 VDC or potentiometer control input, output up to 90 VDC, reversing input, maximum 3 reverses/minute, shunt field supply, speed potentiometer, includes knob and 0-* dial, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
GSD7-120-5CR3    IronHorse DC drive, 120 VAC input, 1-phase, 1/8 to 1/2 hp 90 VDC, 5.5A maximum output current, open frame enclosure, SCR output, 0-10 VDC or potentiometer control input, output up to 90 VDC, reversing input, maximum 3 reverses/minute, shunt field supply, speed potentiometer, includes knob and 0-* dial, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
GSD7-120-1CR30    IronHorse DC drive, 120 VAC input, 1-phase, 1/15 to 1/8 hp 90 VDC, 1.2A maximum output current, open frame enclosure, SCR output, 0-10 VDC or potentiometer control input, output up to 90 VDC, reversing input, maximum 30 reverses/minute, shunt field supply, speed potentiometer, includes knob and 0-* dial, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
GSD7-120-10CR30    IronHorse DC drive, 120 VAC input, 1-phase, 1/8 to 1 hp 90 VDC, 10A maximum output current, open frame enclosure, SCR output, 0-10 VDC or potentiometer control input, output up to 90 VDC, reversing input, maximum 30 reverses/minute, shunt field supply, speed potentiometer, includes knob and 0-* dial, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
GSD7-240-1CR3    IronHorse DC drive, 240 VAC input, 1-phase, 1/25 to 1/4 hp 180 VDC, 1.2A maximum output current, open frame enclosure, SCR output, 0-10 VDC or potentiometer control input, output up to 180 VDC, reversing input, maximum 3 reverses/minute, shunt field supply, speed potentiometer, includes knob and 0-* dial, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors. 流量計DOLD     AA7562.32/001 DC24V  
GSD7-240-5CR3    IronHorse DC drive, 240 VAC input, 1-phase, 1/8 to 1 hp 180 VDC, 5.5A maximum output current, open frame enclosure, SCR output, 0-10 VDC or potentiometer control input, output up to 180 VDC, reversing input, maximum 3 reverses/minute, shunt field supply, speed potentiometer, includes knob and 0-* dial, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
GSD7-240-10CR30    IronHorse DC drive, 240 VAC input, 1-phase, 1/4 to 2 hp 180 VDC, 10A maximum output current, open frame enclosure, SCR output, 0-10 VDC or potentiometer control input, output up to 180 VDC, reversing input, maximum 30 reverses/minute, shunt field supply, speed potentiometer, includes knob and 0-* dial, screw terminals. For use with Permanent Magnet (PM) DC, shunt wound DC, and universal motors.
    Ironhorse DC Drive Accessories
GSDA-5K    IronHorse speed potentiometer kit, output up to input voltage, speed potentiometer, includes knob and 0-* dial, 5K Ohms, 0.5 watts. For use with all GSD series DC drives.
GSDA-DP    IronHorse digital potentiometer, 120/240 VAC input, NEMA 4X enclosure, 1/8 DIN cutout, multiple output selections available, screw terminals. For use with multiple GSD series DC drives.
GSDA-ACCDEC-4    IronHorse Accel/Decel card. For use with GSD4 series DC drives.
GSDA-MREV    IronHorse manual reverse switch, 10A maximum output current, field installed reverse switch, screw terminals. For use with all GSD series DC drives.
GSDA-AI-A    IronHorse analog current input card, 4-20 mA control input, isolated. For use with GSD4 open frame and GSD6 series DC drives.
GSDA-AI-V4    IronHorse analog voltage input card, 0-10 VDC/0-250 VDC control input, isolated. For use with GSD4 series DC drives.
GSDA-AI-V5    IronHorse analog voltage input card, 0-10 VDC/0-250 VDC control input, isolated. For use with GSD5 series DC drives.
GSDA-HTSNK-4    IronHorse heatsink. For use with GSD4 series DC drives.
GS1notes    GS1 Series AC Micro Drives
GS1-10P2    GS1 AC micro drive, 0.25 hp, 120V sing 流量計DOLD     AA7562.32/001 DC24V  le-phase input, 230V three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS1-10P5    GS1 AC micro drive, 0.5 hp, 120V single-phase input, 230V three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS1-20P2    GS1 AC micro drive, 0.25 hp, 230V, single/three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS1-20P5    GS1 AC micro drive, 0.5 hp, 230V, single/three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS1-21P0    GS1 AC micro drive, 1.0 hp, 230V, single/three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS1-22P0    GS1 AC micro drive, 2.0 hp, 230V, three-phase input only, three-phase output, V/F (volts per hertz) control mode. Manual included with product.  
GS2notes    GS2 Series AC Micro Drives
GS2-10P2    GS2 AC micro drive, 0.25 hp, 115V, single-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product.
GS2-10P5    GS2 AC micro drive, 0.5 hp, 115V, single-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product.
GS2-11P0    GS2 AC micro drive, 1.0 hp, 115V, single-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product.
GS2-20P5    GS2 AC micro drive, 0.5 hp, 230V, single/three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS2-21P0    GS2 AC micro drive, 1.0 hp, 230V, single/three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS2-22P0    GS2 AC micro drive, 2.0 hp, 230V, single/three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS2-23P0    GS2 AC micro drive, 3.0 hp, 230V, single/three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS2-25P0    GS2 AC micro drive, 5.0 hp, 230V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS2-27P5    GS2 AC micro drive, 7.5 hp, 230V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS2-41P0    GS2 AC micro drive, 1.0 hp, 460V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS2-42P0    GS2 AC micro drive, 2.0 hp, 460V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS2-43P0    GS2 AC micro drive, 3.0 hp, 460V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS2-45P0    GS2 AC micro drive, 5.0 hp, 460V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS2-47P5    GS2 AC micro drive, 7.5 hp, 460V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS2-4010    GS2 AC micro drive, 10 hp, 460V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product. 
GS2-51P0    GS2 AC micro drive, 1.0 hp, 575V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product.
GS2-52P0    GS2 AC micro drive, 2.0 hp, 575V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product.
GS2-53P0    GS2 AC micro drive, 3.0 hp, 575V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product.
GS2-55P0    GS2 AC micro drive, 5.0 hp, 575V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product.
GS2-57P5    GS2 AC micro drive, 7.5 hp, 575V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product.
GS2-5010    GS2 AC micro drive, 10 hp, 575V, three-phase input, three-phase output, V/F (volts per hertz) control mode. Manual included with product.
DURAnotes    DURApulse AC Drives
GS3-21P0    DURApulse AC drive, 1.0 hp, 230V, single/three-phase input, three-phase output, sensorless vector or V/F (volts per hertz) control modes. Manual included with product.
GS3-22P0    DURApulse AC drive, 2.0 hp, 230V, single/three-phase input, three-phase output, sensorless vector or V/F (volts per hertz) control modes. Manual included with product.
GS3-23P0    DURApulse AC drive, 3.0 hp, 230V, single/three-phase input, three-phase output, sensorless vector or V/F (volts per hertz) control modes. Manual included with product.
GS3-25P0    DURApulse AC drive, 5.0 hp, 230V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product.
GS3-27P5    DURApulse AC drive, 7.5 hp, 230V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product.
GS3-2010    DURApulse AC drive, 10 hp, 230V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product.
GS3-2015    DURApulse AC drive, 15 hp, 230V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-2020    DURApulse AC drive, 20 hp, 230V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-2025    DURApulse AC drive, 25 hp, 230V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-2030    DURApulse AC drive, 30 hp, 230V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-2040    DURApulse AC drive, 40 hp, 230V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-2050    DURApulse AC drive, 50 hp, 230V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-41P0    DURApulse AC drive, 1.0 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-42P0    DURApulse AC drive, 2.0 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-43P0    DURApulse AC drive, 3.0 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-45P0    DURApulse AC drive, 5.0 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-47P5    DURApulse AC drive, 7.5 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-4010    DURApulse AC drive, 10 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-4015    DURApulse AC drive, 15 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-4020    DURApulse AC drive, 20 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-4025    DURApulse AC drive, 25 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-4030    DURApulse AC drive, 30 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-4040    DURApulse AC drive, 40 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-4050    DURApulse AC drive, 50 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-4060    DURApulse AC drive, 60 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-4075    DURApulse AC drive, 75 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GS3-4100    DURApulse AC drive, 100 hp, 460V, three-phase, sensorless vector or V/F (volts per hertz) control modes. Manual included with product. 
GSkitnotes    GS Series and DURApulse AC Drives Fuse Kits
GS-10P2-FKIT-1P    Fuse kit, for use with GS1/GS2-10P2 AC drive, 0.25 hp, 115V, single-phase, includes 1 two-pole fuse block and 2 fuses. For use on drive input side only. Not for use between drive and motor.
GS-10P5-FKIT-1P    Fuse kit, for use with GS1/GS2-10P5 AC drive, 0.5 hp, 115V, single-phase, includes 1 two-pole fuse block and 2 fuses. For use on drive input side only. Not for use between drive and motor.
GS-11P0-FKIT-1P    Fuse kit, for use with GS2-11P0 AC drive, 1.0 hp, 115V, single-phase, includes 1 two-pole fuse block and 2 fuses. For use on drive input side only. Not for use between drive and motor.
GS-20P2-FKIT-1P    Fuse kit, for use with GS1-20P2 AC drive, 0.25 hp, 230V single-phase, includes 1 two-pole fuse block and 2 fuses. For use on drive input side only. Not for use between drive and motor.
GS-20P2-FKIT-3P    Fuse kit, for use with GS1-20P2 AC drive, 0.25 hp, 230V three-phase, includes 1 two-pole fuse block and 2 fuses. For use on drive input side only. Not for use between drive and motor.
GS-20P5-FKIT-1P    Fuse kit, for use with GS1/GS2-20P5 AC drive, 0.5 hp, 230V, single-phase, includes 1 two-pole fuse block and 2 fuses. For use on drive input side only. Not for use between drive and motor.
GS-20P5-FKIT-3P    Fuse kit, for use with GS1/GS2-20P5 AC drive, 0.5 hp, 230V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-21P0-FKIT-1P    Fuse kit, for use with GS1/GS2/GS3-21P0 AC drive, 1.0 hp, 230V, single-phase, includes 1 two-pole fuse block and 2 fuses. For use on drive input side only. Not for use between drive and motor.
GS-21P0-FKIT-3P    Fuse kit, for use with GS1/GS2/GS3-21P0 AC drives, 1.0 hp, 230V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-22P0-FKIT-1P    Fuse kit, for use with GS2/GS3-22P0 AC drive, 2.0 hp, 230V, single-phase, includes 1 two-pole fuse block and 2 fuses. For use on drive input side only. Not for use between drive and motor.
GS-22P0-FKIT-3P    Fuse kit, for use with GS1/GS2/GS3-22P0 AC drives, 2.0 hp, 230V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-23P0-FKIT-1P    Fuse kit, for use with GS2/GS3-23P0 AC drive, 3.0 hp, 230V, single-phase, includes 1 two-pole fuse block and 2 fuses. For use on drive input side only. Not for use between drive and motor.
GS-23P0-FKIT-3P    Fuse kit, for use with GS2/GS3-23P0 AC drives, 3.0 hp, 230V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-25P0-FKIT    Fuse kit, for use with GS2/GS3-25P0 AC drives, 5.0 hp, 230V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-27P5-FKIT    Fuse kit, for use with GS2/GS3-27P5, GS3-2010, GS3-2015 AC drives, 7.5 hp, 10 hp, 15 hp, 230V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-2020-FKIT    Fuse kit, for use with GS3-2020 AC drive, 20 hp, 230V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-2025-FKIT    Fuse kit, for use with GS3-2025 AC drive, 25 hp, 230V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-2030-FKIT    Fuse kit, for use with GS3-2030 AC drive, 30 hp, 230V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-2040-FKIT    Fuse kit, for use with GS3-2040 AC drive, 40 hp, 230V, three-phase, includes 3 single-pole fuse blocks and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-2050-FKIT    Fuse kit, for use with GS3-2050 AC drive, 50 hp, 230V, three-phase, includes 3 single-pole fuse blocks and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-41P0-FKIT    Fuse kit, for use with GS2/GS3-41P0 AC drives, 1.0 hp, 460V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-42P0-FKIT    Fuse kit, for use with GS2/GS3-42P0, GS2-53P0 AC drives, 2.0/3.0 hp, 460/575V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-43P0-FKIT    Fuse kit, for use with GS2/GS3-43P0, GS2-55P0 AC drives, 3.0/5.0 hp, 460/575V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-45P0-FKIT    Fuse kit, for use with GS2/GS3-45P0 AC drives, 5.0 hp, 460V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-47P5-FKIT    Fuse kit, for use with GS2/GS3-47P5, GS2-57P5, GS2-5010 AC drives, 7.5/10 hp, 460/575V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-4010-FKIT    Fuse kit, for use with GS2/GS3-4010 AC drives, 10 hp, 460V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-4015-FKIT    Fuse kit, for use with GS3-4015 AC drive, 15 hp, 460V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-4020-FKIT    Fuse kit, for use with GS3-4020 AC drive, 20 hp, 460V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-4025-FKIT    Fuse kit, for use with GS3-4025 AC drive, 25 hp, 460V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-4030-FKIT    Fuse kit, for use with GS3-4030 AC drive, 30 hp, 460V, three-phase, includes 1 three-pole fuse block and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-4040-FKIT    Fuse kit, for use with GS3-4040 AC drive, 40 hp, 460V, three-phase, includes 3 single-pole fuse blocks and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-4050-FKIT    Fuse kit, for use with GS3-4050 AC drive, 50 hp, 460V, three-phase, includes 3 single-pole fuse blocks and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-4060-FKIT    Fuse kit, for use with GS3-4060 AC drive, 60 hp, 460V, three-phase, includes 3 single-pole fuse blocks and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-4075-FKIT    Fuse kit, for use with GS3-4075 AC drive, 75 hp, 460V, three-phase, includes 3 single-pole fuse blocks and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GS-4100-FKIT    Fuse kit, for use with GS3-4100 AC drive, 100 hp, 460V, three-phase, includes 3 single-pole fuse blocks and 3 fuses. For use on drive input side only. Not for use between drive and motor.
GSfusenotes    GS Series and DURApulse AC Drives Spare Fuses
GS-10P2-FUSE-1P    Spare fuse, for use with GS-10P2-FKIT-1P AC drive fuse kit, 20A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-10P5-FUSE-1P    Spare fuse, for use with GS-10P5-FKIT-1P AC drive fuse kit, 20A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-11P0-FUSE-1P    Spare fuse, for use with GS-11P0-FKIT-1P AC drive fuse kit, 20A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-20P2-FUSE-1P    Spare fuses, for use with GS-20P2-FKIT-1P AC drive fuse kit, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-20P2-FUSE-3P    Spare fuses, for use with GS-20P2-FKIT-3P AC drive fuse kit, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-20P5-FUSE-1P    Spare fuse, for use with GS-20P5-FKIT-1P AC drive fuse kit, 20A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-20P5-FUSE-3P    Spare fuse, for use with GS-20P5-FKIT-3P AC drive fuse kit, 10A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-21P0-FUSE-1P    Spare fuse, for use with GS-21P0-FKIT-1P AC drive fuse kit, 30A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-21P0-FUSE-3P    Spare fuse, for use with GS-21P0-FKIT-3P AC drive fuse kit, 20A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-22P0-FUSE-1P    Spare fuse, for use with GS-22P0-FKIT-1P AC drive fuse kit, 45A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-22P0-FUSE-3P    Spare fuse, for use with GS-22P0-FKIT-3P AC drive fuse kit, 25A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-23P0-FUSE-1P    Spare fuse, for use with GS-23P0-FKIT-1P AC drive fuse kit, 60A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-23P0-FUSE-3P    Spare fuse, for use with GS-23P0-FKIT-3P AC drive fuse kit, 40A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-25P0-FUSE    Spare fuse, for use with GS-25P0-FKIT AC drive fuse kit, 60A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-27P5-FUSE    Spare fuse, for use with GS-27P5-FKIT AC drive fuse kit, 100A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-2010-FUSE    Spare fuse, for use with GS-2010-FKIT AC drive fuse kit, 125A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-2015-FUSE    Spare fuse, for use with GS-2015-FKIT AC drive fuse kit, 175A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-2020-FUSE    Spare fuse, for use with GS-2020-FKIT AC drive fuse kit, 250A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-2025-FUSE    Spare fuse, for use with GS-2025-FKIT AC drive fuse kit, 300A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-2030-FUSE    Spare fuse, for use with GS-2030-FKIT AC drive fuse kit, 350A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-2040-FUSE    Spare fuse, for use with GS-2040-FKIT AC drive fuse kit, 450A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-2050-FUSE    Spare fuse, for use with GS-2050-FKIT AC drive fuse kit, 500A, 300V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-41P0-FUSE    Spare fuse, for use with GS-41P0-FKIT AC drive fuse kit, 10A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-42P0-FUSE    Spare fuse, for use with GS-42P0-FKIT AC drive fuse kit, 15A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-43P0-FUSE    Spare fuse, for use with GS-43P0-FKIT AC drive fuse kit, 20A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-45P0-FUSE    Spare fuse, for use with GS-45P0-FKIT AC drive fuse kit, 30A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-47P5-FUSE    Spare fuse, for use with GS-47P5-FKIT AC drive fuse kit, 50A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-4010-FUSE    Spare fuse, for use with GS-4010-FKIT AC drive fuse kit, 70A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-4015-FUSE    Spare fuse, for use with GS-4015-FKIT AC drive fuse kit, 90A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-4020-FUSE    Spare fuse, for use with GS-4020-FKIT AC drive fuse kit, 125A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-4025-FUSE    Spare fuse, for use with GS-4025-FKIT AC drive fuse kit, 150A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-4030-FUSE    Spare fuse, for use with GS-4030-FKIT AC drive fuse kit, 175A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-4040-FUSE    Spare fuse, for use with GS-4040-FKIT AC drive fuse kit, 225A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-4050-FUSE    Spare fuse, for use with GS-4050-FKIT AC drive fuse kit, 250A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-4060-FUSE    Spare fuse, for use with GS-4060-FKIT AC drive fuse kit, 350A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-4075-FUSE    Spare fuse, for use with GS-4075-FKIT AC drive fuse kit, 400A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GS-4100-FUSE    Spare fuse, for use with GS-4100-FKIT AC drive fuse kit, 600A, 600V, package of 5. For use on drive input side only. Not for use between drive and motor.
GSLRnotes    GS Series and DURApulse AC Drives Line Reactors
GS-10P2-LR    Line reactor, for use with GS1/GS2-10P2 AC drives, 0.25 hp, 115V single-phase, input side only
GS-11P0-LR    Line reactor, for use with GS2-11P0 AC drive, 1.0 hp, 115V single-phase, input side only
GS-23P0-LR-1PH    Line reactor, for use with GS2-23P0 AC drive, 3.0 hp, 230V single-phase, input side only
GS-27P5-LR    Line reactor, for use with GS2/GS3-27P5 AC drives, 7.5 hp, 230V three-phase, input/output
GS-2025-LR    Line reactor, for use with GS3-2025 AC drive, 25 hp, 230V three-phase, input/output
GS-2030-LR    Line reactor, for use with GS3-2030 AC drive, 30 hp, 230V three-phase, input/output
GS-2040-LR    Line reactor, for use with GS3-2040 AC drive, 40 hp, 230V three-phase, input/output
GS-51P0-LR    Line reactor, for use with GS3-51P0 AC drive, 1.0 hp, 575V three-phase, input/output
GS-52P0-LR    Line reactor, for use with GS3-52P0 AC drive, 2.0 hp, 575V three-phase, input/output
    AC Line Reactors for AC Drives
LR-10P2-1PH    Line reactor for VFD (AC drives), 120V, 0.25 hp, 3% impedance, single-phase.  Use on drive input side only.
LR-10P5-1PH    Line reactor for VFD (AC drives), 120V, 0.5 hp, 3% impedance, single-phase.  Use on drive input side only.
LR-11P0-1PH    Line reactor for VFD (AC drives), 120V, 1 hp, 3% impedance, single-phase.  Use on drive input side only.
LR-20P5-1PH    Line reactor for VFD (AC drives), 230V, 0.5 hp, 3% impedance, single-phase.  Use on drive input side only.
LR-20P5    Line reactor for VFD (AC drives), 230V, 0.5 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-21P0-1PH    Line reactor for VFD (AC drives), 230V, 1 hp, 3% impedance, single-phase.  Use on drive input side only.
LR-21P0    Line reactor for VFD (AC drives), 230V, 1 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-22P0-1PH    Line reactor for VFD (AC drives), 230V, 2 hp, 3% impedance, single-phase.  Use on drive input side only.
LR-22P0    Line reactor for VFD (AC drives), 230V, 2 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-23P0-1PH    Line reactor for VFD (AC drives), 230V, 3 hp, 3% impedance, single-phase.  Use on drive input side only.
LR-23P0    Line reactor for VFD (AC drives), 230V, 3 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-25P0    Line reactor for VFD (AC drives), 230V, 5 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-27P5    Line reactor for VFD (AC drives), 230V, 7.5 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-2010    Line reactor for VFD (AC drives), 230V, 10 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-2015    Line reactor for VFD (AC drives), 230V, 15 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-2020    Line reactor for VFD (AC drives), 230V, 20 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-2025    Line reactor for VFD (AC drives), 230V, 25 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-2030    Line reactor for VFD (AC drives), 230V, 30 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-2040    Line reactor for VFD (AC drives), 230V, 40 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-2050    Line reactor for VFD (AC drives), 230V, 50 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-41P0    Line reactor for VFD (AC drives), 460V, 1 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-42P0    Line reactor for VFD (AC drives), 460V, 2 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-43P0    Line reactor for VFD (AC drives), 460V, 3 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-45P0    Line reactor for VFD (AC drives), 460V, 5 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-47P5    Line reactor for VFD (AC drives), 460V, 7.5 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4010    Line reactor for VFD (AC drives), 460V, 10 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4015    Line reactor for VFD (AC drives), 460V, 15 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4020    Line reactor for VFD (AC drives), 460V, 20 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4025    Line reactor for VFD (AC drives), 460V, 25 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4030    Line reactor for VFD (AC drives), 460V, 30 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4040    Line reactor for VFD (AC drives), 460V, 40 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4050    Line reactor for VFD (AC drives), 460V, 50 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4060    Line reactor for VFD (AC drives), 460V, 60 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4075    Line reactor for VFD (AC drives), 460V, 75 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4100    Line reactor for VFD (AC drives), 460V, 100 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-51P0    Line reactor for VFD (AC drives), 575V, 1 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-52P0    Line reactor for VFD (AC drives), 575V, 2 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-53P0    Line reactor for VFD (AC drives), 575V, 3 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-55P0    Line reactor for VFD (AC drives), 575V, 5 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-5010    Line reactor for VFD (AC drives), 575V, 10 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4125    Line reactor for VFD (AC drives), 460V, 125 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4150    Line reactor for VFD (AC drives), 460V, 150 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4200    Line reactor for VFD (AC drives), 460V, 200 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4250    Line reactor for VFD (AC drives), 460V, 250 hp, 3% impedance, three-phase.  Use on drive input or output side.
LR-4300    Line reactor for VFD (AC drives), 460V, 300 hp, 3% impedance, three-phase.  Use on drive input or output side.
GSBRnotes    GS Series and DURApulse Drives Braking Resistors
GS-20P5-BR    Braking resistor, for use with GS2-10P2, GS2-10P5, GS2-20P5 AC drives, 80 watt, 200 ohm
GS-21P0-BR    Braking resistor, for use with GS2-11P0, GS2/GS3-21P0 AC drives, 80 watt, 200 ohm
GS-22P0-BR    Braking resistor, for use with GS2/GS3-22P0 AC drives, 300 watt, 100 ohm
GS-23P0-BR    Braking resistor, for use with GS2/GS3-23P0 AC drives, 300 watt, 70 ohm
GS-25P0-BR    Braking resistor, for use with GS2/GS3-25P0 AC drives or SVA-2040 servo drive, 400 watt, 40 ohm
GS-27P5-BR    Braking resistor, for use with GS2/GS3-27P5 AC drives, 500 watt, 30 ohm
GS-41P0-BR    Braking resistor, for use with GS2/GS3-41P0 AC drives, 80 watt, 750 ohm
GS-42P0-BR    Braking resistor, for use with GS2/GS3-42P0, GS2-51P0/52P0/53P0/55P0/57P5 AC drives, 300 watt, 400 ohm. GS2-53P0/55P0/57P5 require 2 braking resistors.
GS-43P0-BR    Braking resistor, for use with GS2/GS3-43P0 AC drives, 300 watt, 250 ohm
GS-45P0-BR    Braking resistor, for use with GS2/GS3-45P0 AC drives, 400 watt, 150 ohm
GS-47P5-BR    Braking resistor, for use with GS2/GS3-47P5 AC drives, 500 watt, 100 ohm
GS-4010-BR    Braking resistor, for use with GS2/GS3-4010, GS2-5010 AC drives, 1000 watt, 75 ohm. GS2-5010 requires 2 braking resistors.
GS-2010-BR-ENC    Braking resistor, for use with GS3-2010 AC drive or SVA-2100/2300 servo drives, 1000 watt, 20 ohm, NEMA 1 enclosure with built-in temperature sensor
GS-2015-BR-ENC    Braking resistor, for use with GS3-2015 AC drive, 2400 watt, 13.6 ohm, NEMA 1 enclosure with built-in temperature sensor
GS-2020-BR-ENC    Braking resistor, for use with GS3-2020 AC drive, 3000 watt, 10 ohm, NEMA 1 enclosure with built-in temperature sensor. Requires external braking unit GS-2DBU.
GS-2025-BR-ENC    Braking resistor, for use with GS3-2025 AC drive, 4800 watt, 8 ohm, NEMA 1 enclosure with built-in temperature sensor. Requires external braking unit GS-2DBU.
GS-2030-BR-ENC    Braking resistor, for use with GS3-2030 AC drive, 4800 watt, 6.8 ohm, NEMA 1 enclosure with built-in temperature sensor. Requires external braking unit GS-2DBU.
GS-2040-BR-ENC    Braking resistor, for use with GS3-2040 AC drive, 3000 watt, 10 ohm, NEMA 1 enclosure with built-in temperature sensor. AC drive requires 2 braking resistors and 2 external braking units GS-2DBU.
GS-2050-BR-ENC    Braking resistor, for use with GS3-2050 AC drive, 4800 watt, 8 ohm, NEMA 1 enclosure with built-in temperature sensor. AC drive requires 2 braking resistors and 2 external braking units GS-2DBU.
GS-4015-BR-ENC    Braking resistor, for use with GS3-4015 AC drive, 1000 watt, 50 ohm, NEMA 1 enclosure with built-in temperature sensor
GS-4020-BR-ENC    Braking resistor, for use with GS3-4020 AC drive,  1500 watt, 40 ohm, NEMA 1 enclosure with built-in temperature sensor. Requires external braking unit GS-4DBU.
GS-4025-BR-ENC    Braking resistor, for use with GS3-4025 AC drive, 4800 watt, 32 ohm, NEMA 1 enclosure with built-in temperature sensor. Requires external braking unit GS-4DBU.
GS-4030-BR-ENC    Braking resistor, for use with GS3-4030 AC drive, 4800 watt, 27.2 ohm, NEMA 1 enclosure with built-in temperature sensor. Requires external braking unit GS-4DBU.
GS-4040-BR-ENC    Braking resistor, for use with GS3-4040 AC drive,  6000 watt, 20 ohm, NEMA 1 enclosure with built-in temperature sensor. Requires external braking unit GS-4DBU.
GS-4050-BR-ENC    Braking resistor, for use with GS3-4050 AC drive, 9600 watt, 16 ohm, NEMA 1 enclosure with built-in temperature sensor. Requires external braking unit GS-4DBU.
GS-4060-BR-ENC    Braking resistor, for use with GS3-4060 AC drive, 9600 watt, 13.6 ohm, NEMA 1 enclosure with built-in temperature sensor. Requires external braking unit GS-4DBU.
GS-4075-BR-ENC    Braking resistor, for use with GS3-4075 AC drive, 6000 watt, 20 ohm, NEMA 1 enclosure with built-in temperature sensor. AC drive requires 2 braking resistors and 2 external braking units GS-4DBU.
GS-4100-BR-ENC    Braking resistor, for use with GS3-4100 AC drive, 9600 watt, 13.6 ohm, NEMA 1 enclosure with built-in temperature sensor. AC drive requires 2 braking resistors and 2 external braking units GS-4DBU.
GSBRUnotes    DURApulse Drives Braking Units
GS-2DBU    Dynamic braking unit, 230 VAC, for use with GS3 (DuraPulse) drives only. Purchase dynamic braking resistors separay.
GS-4DBU    Dynamic braking unit, 460 VAC, for use with GS3 (DuraPulse) drives only. Purchase dynamic braking resistors separay.
    Roxburgh 3-Phase Drive-Rated High-Performance EMI/RF Filters (6A - 100A)
KMF306A    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 6A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
KMF310A    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 10A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
KMF318A    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 18A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
KMF325A    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 25A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
KMF336A    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 36A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
KMF350A    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 50A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 10kA SCCR, screw terminals. For use with 3-phase AC drives.
KMF370A    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 70A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
KMF3100A    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 100A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 10kA SCCR, screw terminals. For use with 3-phase AC drives.
    Roxburgh 3-Phase Drive-Rated Very High-Performance EMI/RF Filters (10A - 800A)
MIF310    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 10A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
MIF316    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 16A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
MIF323    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 23A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
MIF330B    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 30A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, M5 studs. For use with 3-phase AC drives. Includes SLV37 protective boots.
MIF350    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 50A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 10kA SCCR, M6 studs. For use with 3-phase AC drives. Includes SLV38 protective boots.
MIF375    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 75A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 10kA SCCR, M8 studs. For use with 3-phase AC drives. Includes SLV39 protective boots.
MIF3100    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 100A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 10kA SCCR, M8 studs. For use with 3-phase AC drives. Includes SLV39 protective boots.
MIF3150    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 150A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 10kA SCCR, M10 studs. For use with 3-phase AC drives. Includes SLV40 protective boots.
MIF3180    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 180A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 10kA SCCR, M10 studs. For use with 3-phase AC drives.
MIF3400B    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 400A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 30kA SCCR, M12 studs. For use with 3-phase AC drives.
MIF3800    Roxburgh EMI input filter, 230/460 VAC, 3-phase, 800A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 30kA SCCR, M12 studs. For use with 3-phase AC drives.
SLV37-3PK    Roxburgh protective boot, package of 3. For use with MIF330B filters.
SLV38-3PK    Roxburgh protective boot, package of 3. For use with MIF350 filters.
SLV39-3PK    Roxburgh protective boot, package of 3. For use with MIF375, MIF3100 filters.
SLV40-3PK    Roxburgh protective boot, package of 3. For use with MIF3150, MIF3180 filters.
    Roxburgh 3-Phase Drive-Rated High-Performance 575V EMI/RF Filters (6A - 33A)
KMF306V    Roxburgh EMI input filter, 575 VAC, 3-phase, 6A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
KMF310V    Roxburgh EMI input filter, 575 VAC, 3-phase, 10A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
KMF318V    Roxburgh EMI input filter, 575 VAC, 3-phase, 18A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
KMF325V    Roxburgh EMI input filter, 575 VAC, 3-phase, 25A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
KMF336V    Roxburgh EMI input filter, 575 VAC, 3-phase, 36A, panel mount, EMI/RFI filtering, 2-stage, drive rated, 5kA SCCR, screw terminals. For use with 3-phase AC drives.
    Roxburgh 1-Phase Drive-Rated EMI/RF Filters (1A - 30A)
RES90F01    Roxburgh EMI input filter, 120/240 VAC, 1-phase, 1A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, 1/4 inch quick-disconnect. For use with 1-phase AC drives.
RES90F03    Roxburgh EMI input filter, 120/240 VAC, 1-phase, 3A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, 1/4 inch quick-disconnect. For use with 1-phase AC drives.
RES90F06    Roxburgh EMI input filter, 120/240 VAC, 1-phase, 6A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, 1/4 inch quick-disconnect. For use with 1-phase AC drives.
RES90F10    Roxburgh EMI input filter, 120/240 VAC, 1-phase, 10A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, 1/4 inch quick-disconnect. For use with 1-phase AC drives.
RES90F16    Roxburgh EMI input filter, 120/240 VAC, 1-phase, 16A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, 1/4 inch quick-disconnect. For use with 1-phase AC drives.
RES90S20    Roxburgh EMI input filter, 120/240 VAC, 1-phase, 20A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, M4 studs. For use with 1-phase AC drives.
RES90S30    Roxburgh EMI input filter, 120/240 VAC, 1-phase, 30A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, M4 studs. For use with 1-phase AC drives.
    Roxburgh 1-Phase Drive-Rated High-Performance EMI/RF Filters (3A - 23A)
MIF03    Roxburgh EMI input filter, 120/240 VAC, 1-phase, 3A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, spring clamp terminals. For use with 1-phase AC drives.
MIF06    Roxburgh EMI input filter, 120/240 VAC, 1-phase, 6A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, spring clamp terminals. For use with 1-phase AC drives.
MIF10    Roxburgh EMI input filter, 120/240 VAC, 1-phase, 10A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, screw terminals. For use with 1-phase AC drives. Includes TER524-AS protective cover.
MIF16    Roxburgh EMI input filter, 120/240 VAC, 1-phase, 16A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, screw terminals. For use with 1-phase AC drives. Includes TER524-AS protective cover.
MIF23    Roxburgh EMI input filter, 120/240 VAC, 1-phase, 23A, panel mount, EMI/RFI filtering, multi-stage, drive rated, 5kA SCCR, screw terminals. For use with 1-phase AC drives.
TER524-AS    Roxburgh protective cover. For use with MIF10, MIF16 filters.
    Ferrite Toroids and Reactors
TOR254    Roxburgh toroid, EMI/RFI filtering, 66 mm inside diameter, 102 mm outside diameter, 15 mm thick. For use with all AC drives.
TOR221    Roxburgh toroid, EMI/RFI filtering, 38 mm inside diameter, 63 mm outside diameter, 25 mm thick. For use with all AC drives.
RF220X00A    Zero phase reactor, for use with GS1, GS2, or GS3 series AC drives
GSEMInotes    GS EMI/RF Filters
20DRT1W3S    EMI input filter, 230 VAC, 1-phase, 20A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, screw terminals and ring terminals. For use with 1-phase AC drives.
32DRT1W3C    EMI input filter, 230 VAC, 1-phase, 32A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, screw terminals and ring terminals. For use with 1-phase AC drives.
40TDS4W4B    EMI input filter, 230 VAC, 3-phase, 40A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, screw terminals and ring terminals. For use with 3-phase AC drives.
11TDT1W4S    EMI input filter, 460 VAC, 3-phase, 11A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, screw terminals and ring terminals. For use with 3-phase AC drives.
17TDT1W44    EMI input filter, 460 VAC, 3-phase, 17A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, screw terminals and ring terminals. For use with 3-phase AC drives.
26TDT1W4B4    EMI input filter, 460 VAC, 3-phase, 26A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, screw terminals and ring terminals. For use with 3-phase AC drives.
10TDT1W4C    EMI input filter, 230 VAC, 3-phase, 10A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, screw terminals and ring terminals. For use with 3-phase AC drives.
26TDT1W4C    EMI input filter, 230 VAC, 3-phase, 26A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, screw terminals and ring terminals. For use with 3-phase AC drives.
50TDS4W4C    EMI input filter, 230/460 VAC, 3-phase, 50A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, M6 studs and ring terminals. For use with 3-phase AC drives.
100TDS84C    EMI input filter, 230/460 VAC, 3-phase, 100A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, M8 studs. For use with 3-phase AC drives.
150TDS84C    EMI input filter, 230/460 VAC, 3-phase, 150A, panel mount, EMI/RFI filtering, drive rated, 10kA SCCR, M8 studs. For use with 3-phase AC drives.
180TDS84C    EMI input filter, 230 VAC, 3-phase, 180A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, M8 studs. For use with 3-phase AC drives.
RF022B43AA    EMI input filter, 460 VAC, 3-phase, 5.9A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, screw terminals and pigtail. For use with 3-phase AC drives.
RF037B43BA    EMI input filter, 460 VAC, 3-phase, 11.2A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, screw terminals and pigtail. For use with 3-phase AC drives.
RF110B43CA    EMI input filter, 460 VAC, 3-phase, 25A, panel mount, EMI/RFI filtering, drive rated, 5kA SCCR, screw terminals and pigtail. For use with 3-phase AC drives.
200TDDS84C    EMI input filter, 460 VAC, 3-phase, 200A, panel mount, EMI/RFI filtering, drive rated, 10kA SCCR, busbar. For use with 3-phase AC drives.
GS2confignotes    GS Series and DURApulse Configuration Devices and Cables
GS2-KPD    Spare Keypad, GS2 series Micro Drive
GS-CBL2-1L    Cable for remote mounting of a GS2 series or DuraPulse drive keypad, 1 meter (3.3 ft.) length
GS-CBL2-3L    Cable for remote mounting of a GS2 series or DuraPulse drive keypad, 3 meter (9.9 ft.) length
GS-CBL2-5L    Cable for remote mounting of a GS2 series or DuraPulse drive keypad, 5 meter (16 ft.) length
GSconfignotes    GS Series and DURApulse Configuration Software and Cables
GSOFT    Windows-based AC Drive configuration software for use with GS1, GS2, and DURApulse drives only. Use GS-232CBL to interface from PC to GS2 drives; GS1 and DURApulse drives require RS-232/485 converter. Available as a free download from the AutomationDirect Web site, or the CD can be purchased.
GS-232CBL    "PC programming cable for use with GSOFT, 3 meter (10 ft.), for GS2 series drive RS-232 use only 
"
USB-485M    2-wire USB to RS-485 serial adapter, with universal female RJ45/RJ12 modular connector (accepts RJ12 and RJ45 plugs).  Includes 2-meter (6.5 ft.) 6-conductor RJ12 crossover cable (for all GS drives), 2-meter (6.5 ft.) 2-wire RJ12 cable (for universal RS-485 use), mini-CD with Windows driver, and installation instructions.
GS2optionnotes    GS Series and DURApulse Option and Communication Modules and Accessories
GS-RS485-4    RS485 comm board, 4-port, for GS2 drives
GS-RS485-8    RS485 comm board, 8-port, for GS2 drives
GS-EDRV100    10/100 Mbps Ethernet communications module for GS series AC drives, converts the Ethernet signal from Do-more Ethernet I/O, Productivity3000 Remote I/O and other qualified networks to the drives' serial Modbus connection; enclosed compact form factor, 35mm DIN rail mountable. Serial cable included (2 ft).
GS3-BZL    Flush mount bezel kit for remote mounting of the DURApulse removable keypad
GS2-DR02    Adapter plate, for mounting smaller-frame GS2 AC drives onto 35mm DIN rail;  fits GS2 AC drives 2 hp and below, and 460V and 575V 3 hp GS2 AC drives.  Adapter, drive mounting screws, and installation instructions included.
GS3-KPD    Spare keypad for DURApulse series AC drives
GS3-FB    Pulse generator feed card for DURApulse series AC drives
    GS Series and Durapulse AC Drives Replacement Parts
GS-FAN-1    Replacement fan for DURApulse AC Drive models GS3-43P0
GS-FAN-2    Replacement fan for DURApulse AC Drive models GS3-23P0/25P0/45P0
GS-FAN-3    Replacement fan for DURApulse AC Drive models GS3-27P5/2010/2015/47P5/4010/4015
GS-FAN-4    Replacement fan for DURApulse AC Drive models GS3-2020/2025/2030/4020/4025/4030
GS-FAN-5    Replacement fan for DURApulse AC Drive models GS3-2040/2050/4040/4050/4060/4075/4100
SLnotes    Slar Compact 3-phase Soft Starters and Accessories
SR22-05    Slar SR22 series compact reduced voltage soft starter, 5A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour. (Optional SR22-FAN-45 increases duty cycle to 60 starts/hour.) Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. 35mm DIN rail or panel mountable. Unit requires 24VDC control voltage.
SR22-07    Slar SR22 series compact reduced voltage soft starter, 7A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour. (Optional SR22-FAN-45 increases duty cycle to 60 starts/hour.) Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. 35mm DIN rail or panel mountable. Unit requires 24VDC control voltage.
SR22-09    Slar SR22 series compact reduced voltage soft starter, 9A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour. (Optional SR22-FAN-45 increases duty cycle to 60 starts/hour.) Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. 35mm DIN rail or panel mountable. Unit requires 24VDC control voltage.
SR22-12    Slar SR22 series compact reduced voltage soft starter, 12A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour. (Optional SR22-FAN-45 increases duty cycle to 60 starts/hour.) Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. 35mm DIN rail or panel mountable. Unit requires 24VDC control voltage.
SR22-16    Slar SR22 series compact reduced voltage soft starter, 16A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour. (Optional SR22-FAN-45 increases duty cycle to 60 starts/hour.) Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. 35mm DIN rail or panel mountable. Unit requires 24VDC control voltage.
SR22-22    Slar SR22 series compact reduced voltage soft starter, 22A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour. (Optional SR22-FAN-55 increases duty cycle to 60 starts/hour.) Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. 35mm DIN rail or panel mountable. Unit requires 24VDC control voltage.
SR22-30    Slar SR22 series compact reduced voltage soft starter, 30A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour. (Optional SR22-FAN-55 increases duty cycle to 60 starts/hour.) Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. 35mm DIN rail or panel mountable. Unit requires 24VDC control voltage.
SR22-36    Slar SR22 series compact reduced voltage soft starter, 36A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour. (Optional SR22-FAN-55 increases duty cycle to 60 starts/hour.) Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. 35mm DIN rail or panel mountable. Unit requires 24VDC control voltage.
SR22-40    Slar SR22 series compact reduced voltage soft starter, 40A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour. (Optional SR22-FAN-55 increases duty cycle to 60 starts/hour.) Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. 35mm DIN rail or panel mountable. Unit requires 24VDC control voltage.
SR22-FAN-45    Cooling fan for SR22 series 45mm soft starters, increases duty cycle to 60 starts/hour for SR22-05, SR22-07, SR22-09, SR22-12, and SR22-16 models. Includes mounting hardware and connector; unit snaps onto bottom and plugs into soft starter, no additional wiring necessary.
SR22-FAN-55    Cooling fan for SR22 series 55mm soft starters, increases duty cycle to 60 starts/hour for SR22-22, SR22-30, SR22-36, and SR22-40 models. Includes mounting hardware and connector; unit snaps onto bottom and plugs into soft starter, no additional wiring necessary.
    Slar Basic 3-phase Soft Starters and Accessories
SR33-22    Slar SR33 series basic reduced voltage soft starter, 22A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. Installation instructions included. 
SR33-29    Slar SR33 series basic reduced voltage soft starter, 29A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. Installation instructions included.
SR33-41    Slar SR33 series basic reduced voltage soft starter, 41A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. Installation instructions included.
SR33-55    Slar SR33 series basic reduced voltage soft starter, 55A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. Installation instructions included.
SR33-66    Slar SR33 series basic reduced voltage soft starter, 66A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. Installation instructions included.
SR33-80    Slar SR33 series basic reduced voltage soft starter, 80A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. Installation instructions included.
SR33-97    Slar SR33 series basic reduced voltage soft starter, 97A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. Installation instructions included.
SR33-132    Slar SR33 series basic reduced voltage soft starter, 132A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage.  SR33-132 thru SR33-280 starters require insulation kit SR33-HS1 for UL installations. Installation instructions included. Lugs/ring terminals not included.
SR33-160    Slar SR33 series basic reduced voltage soft starter, 160A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage.SR33-132 thru SR33-280 starters require insulation kit SR33-HS1 for UL installations. Installation instructions included. Lugs/ring terminals not included.
SR33-195    Slar SR33 series basic reduced voltage soft starter, 195A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. SR33-132 thru SR33-280 starters require insulation kit SR33-HS1 for UL installations. Installation instructions included. Lugs/ring terminals not included.
SR33-241    Slar SR33 series basic reduced voltage soft starter, 241A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. SR33-132 thru SR33-280 starters require insulation kit SR33-HS1 for UL installations. Installation instructions included. Lugs/ring terminals not included.
SR33-280    Slar SR33 series basic reduced voltage soft starter, 280A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. SR33-132 thru SR33-280 starters require insulation kit SR33-HS1 for UL installations. Installation instructions included. Lugs/ring terminals not included.
SR33-350    Slar SR33 series basic reduced voltage soft starter, 350A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. SR33-350 thru SR33-482 have not been tested for UL installations. Installation instructions included. Lugs/ring terminals not included.
SR33-430    Slar SR33 series basic reduced voltage soft starter, 430A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. SR33-350 thru SR33-482 have not been tested for UL installations. Installation instructions included. Lugs/ring terminals not included.
SR33-482    Slar SR33 series basic reduced voltage soft starter, 482A, 208-230/460 VAC, for 3-phase motors (two phases controlled), rated for 10 starts/hour; footprint comparable to a Star-Delta starter. Three potentiometers control settings for: Start Time, Starting Voltage, and Stop Time (ramps down motor voltage, but does not apply braking torque to a load). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Unit requires 24VDC control voltage. SR33-350 thru SR33-482 have not been tested for UL installations. Installation instructions included. Lugs/ring terminals not included.
SR33-HS1    Optional heat shrink insulation kit for SR33 soft starters.  Required for UL installation for the following starters: SR33-132, SR33-160, SR33-195, SR33-241, and SR33-280.  Kit includes 1 piece of 1-inch heat shrink tubing that can be cut to length to insulate line and load power wiring and lugs.  Installation instructions included.
    Slar Full-featured 3-phase Soft Starters and Accessories
SR55-017    Slar SR55 series full-featured soft starter, 17A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating.
SR55-021    Slar SR55 series full-featured soft starter, 21A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating.
SR55-027    Slar SR55 series full-featured soft starter, 27A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating.
SR55-034    Slar SR55 series full-featured soft starter, 34A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating.
SR55-040    Slar SR55 series full-featured soft starter, 40A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating.
SR55-052    Slar SR55 series full-featured soft starter, 52A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating.
SR55-065    Slar SR55 series full-featured soft starter, 65A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating.
SR55-077    Slar SR55 series full-featured soft starter, 77A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating.
SR55-096    Slar SR55 series full-featured soft starter, 96A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating.
SR55-124    Slar SR55 series full-featured soft starter, 124A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating.
SR55-156    Slar SR55 series full-featured soft starter, 156A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating.
SR55-180    Slar SR55 series full-featured soft starter, 180A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating.
SR55-242    Slar SR55 series full-featured soft starter, 242A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR55-302    Slar SR55 series full-featured soft starter, 302A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR55-361    Slar SR55 series full-featured soft starter, 361A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 24 VDC, 110 VAC or 230VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR55-414    Slar SR55 series full-featured soft starter, 414A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 120 VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR55-477    Slar SR55 series full-featured soft starter, 477A, 200-480 VAC 3-phase, rated for 5 starts/hour, internally bypassed, 120 VAC control power required, IP20 rating, panel-mount. Fully digital soft starter includes pump control, optional in-the-delta operation, and iERS (inligent Energy Recovery System). Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR55-FG-1    Finger guards, replacement, for size 1 Slar SR55 series soft starter power terminals. Provides IP20 protection rating. Package of 2.
SR55-FG-2    Finger guards, replacement, for size 2 Slar SR55 series soft starter power terminals. Provides IP20 protection rating. Package of 2.
SR55-CM-ENETIP    EtherNet/IP communication module, optional, for Slar SR55 series soft starters, dual RJ45 communication ports, complete EtherNet/IP adapter, TCP/IP socket interface, CIP parameter object support, implicit and explicit messaging support, transformer isolated Ethernet interface, 10/100 Mbps full duplex
SR55-CM-MODTCP    Modbus TCP communication module, optional, for Slar SR55 series soft starters, dual RJ45 communication ports, complete Modbus TCP server, up to 256 bytes of I/O data in each direction, transformer isolated interface, 100 Mbps full duplex, TCP/IP socket interface, capable of supporting 4 simultaneous connections
SR55-KPD-REM    Touchscreen, optional remote, for Slar SR55 series soft starters. Used to remoy monitor and/or program SR55 series units without opening enclosures. Rated for NEMA 4/4X enclosures, no external power wiring required. Includes 3m (9.8 ft.) Cat5e cable and SR55-RJ45-RJ12 adapter.
SR55-RJ45-RJ12    RJ45 female to RJ12 male adapter, optional, for Slar SR55 series soft starters
SR55-SPLT    Serial Modbus communication splitter, optional, for Slar SR55 series soft starters. Used for creating a Modbus network with multiple SR55 series soft starters. Uses 3 serial RJ45 connectors for upstream/downstream connectivity and for connection to the starter. Includes 3m (9.8 ft.) Cat5e cable and SR55-RJ45-RJ12 adapter.
SR55-FAN-2    Cooling fan, replacement, for size 1 Slar SR55 series soft starters, 60 x 60 x 15 mm. Includes wiring connectors.
SR55-FAN-3    Cooling fan, replacement, for size 2 Slar SR55 series soft starters, 80 x 80 x 15 mm. Includes wiring connectors.
SR55-FAN-6    Cooling fan, replacement, for size 2 Slar SR55 series soft starters, 80 x 80 x 20 mm. Includes wiring connectors.
SR55-FAN-7    Cooling fan, replacement, for size 3 Slar SR55 series soft starters, 120 x 120 x 25 mm. Includes push rivets for fan guards and wiring connectors.
SR55-FAN-8    Cooling fan, replacement, for size 3 Slar SR55 series soft starters, 171 x 151 x 151 mm
SR55-KPD    Touchscreen, replacement, for Slar SR55 series soft starters. Includes replacement bezel.
    Legacy Slar Full-featured 3-phase Soft Starters and Accessories
SR44-23    Slar SR44 series full featured reduced voltage soft starter, 23A, 230-460 VAC 3-phase, rated for 10 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR44-30    Slar SR44 series full featured reduced voltage soft starter, 30A, 230-460 VAC 3-phase, rated for 10 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR44-44    Slar SR44 series full featured reduced voltage soft starter, 44A, 230-460 VAC 3-phase, rated for 10 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR44-59    Slar SR44 series full featured reduced voltage soft starter, 59A, 230-460 VAC 3-phase, rated for 10 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included. 
SR44-72    Slar SR44 series full featured reduced voltage soft starter, 72A, 230-460 VAC 3-phase, rated for 10 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included. 
SR44-85    Slar SR44 series full featured reduced voltage soft starter, 85A, 230-460 VAC 3-phase, rated for 10 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR44-105    Slar SR44 series full featured reduced voltage soft starter, 105A, 230-460 VAC 3-phase, rated for 10 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR44-146    Slar SR44 series full featured reduced voltage soft starter, 146A, 230-460 VAC 3-phase, rated for 10 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR44-174    Slar SR44 series full featured reduced voltage soft starter, 174A, 230-460 VAC 3-phase, rated for 10 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR44-202    Slar SR44 series full featured reduced voltage soft starter, 202A, 230-460 VAC 3-phase, rated for 10 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR44-242    Slar SR44 series full featured reduced voltage soft starter, 242A, 230-460 VAC 3-phase, rated for 3 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR44-300    Slar SR44 series full featured reduced voltage soft starter, 300A, 230-460 VAC 3-phase, rated for 3 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR44-370    Slar SR44 series full featured reduced voltage soft starter, 370A, 230-460 VAC 3-phase, rated for 3 starts/hour.  single-phase 230VAC or 115VAC control power required, IP20 rating, panel-mount.  Fully digital soft starter includes pump control, optional in-the-delta operation, external bypass capability, and advanced energy saving mode.  Unit may require derating for applications other than fans and pumps; see specifications for appropriate derating. Lugs/ring terminals not included.
SR44-KPD    Optional remote keypad and 3-meter cable for Slar SR44 series soft starters, used to remoy monitor and/or program SR44 units without opening enclosures.  Rated for NEMA 4/4X enclosures, no external power wiring required.  SR44-RS485 communication card must be installed in starter to use remote keypad.
SR44-RS485    Optional communication card for Slar SR44 series soft starters, can be used to establish RS-485 communication between an SR44 soft starter and any Modbus Master (PC, PLC, etc.).  Plugs directly onto the control board of an SR44 soft starter, no external power required, RJ45 and terminal strip connections onboard.  Can also be used with SR44-KPD to create an internal RS-485 network between SR44 soft starters (one external keypad to control multiple SR44s).
DCMOTnotes    IronHorse 56C Permanent Magnet DC Motors (up to 2 hp)
MTPM-P33-1L18    IronHorse permanent magnet DC motor, general purpose, 0.33 hp, 90VDC armature, 1800 RPM, TENV, 56C frame face (w/48 frame body), 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, SCR rated, 1.0 service factor, electrically reversible, rigid removable bolt-on base, sealed bearings. Set of brushes ships in motor, extra set also included.
MTPM-P50-1L18    IronHorse permanent magnet DC motor, general purpose, 0.50 hp, 90VDC armature, 1800 RPM, TENV, 56C frame face (w/48 frame body), 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, SCR rated, 1.0 service factor, electrically reversible, rigid removable bolt-on base, sealed bearings. Set of brushes ships in motor, extra set also included.
MTPM-P75-1L18    IronHorse permanent magnet DC motor, general purpose, 0.75 hp, 90VDC armature, 1800 RPM, TEFC, 56C frame face (w/48 frame body), 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, SCR rated, 1.0 service factor, electrically reversible, rigid removable bolt-on base, sealed bearings. Set of brushes ships in motor, extra set also included.
MTPM-001-1L18    IronHorse permanent magnet DC motor, general purpose, 1 hp, 90VDC armature, 1800 RPM, TEFC, 56C frame face (w/48 frame body), 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, SCR rated, 1.0 service factor, electrically reversible, rigid removable bolt-on base, sealed bearings. Set of brushes ships in motor, extra set also included.
MTPM-1P5-1L18    IronHorse permanent magnet DC motor, general purpose, 1.5 hp, 90VDC armature, 1800 RPM, TEFC, 56C frame face (w/48 frame body), 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, SCR rated, 1.0 service factor, electrically reversible, rigid removable bolt-on base, sealed bearings. Set of brushes ships in motor, extra set also included.
MTPM-P33-1M18    IronHorse permanent magnet DC motor, general purpose, 0.33 hp, 180VDC armature, 1800 RPM, TENV, 56C frame face (w/48 frame body), 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, SCR rated, 1.0 service factor, electrically reversible, rigid removable bolt-on base, sealed bearings. Set of brushes ships in motor, extra set also included.
MTPM-P50-1M18    IronHorse permanent magnet DC motor, general purpose, 0.50 hp, 180VDC armature, 1800 RPM, TENV, 56C frame face (w/48 frame body), 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, SCR rated, 1.0 service factor, electrically reversible, rigid removable bolt-on base, sealed bearings. Set of brushes ships in motor, extra set also included.
MTPM-P75-1M18    IronHorse permanent magnet DC motor, general purpose, 0.75 hp, 180VDC armature, 1800 RPM, TEFC, 56C frame face (w/48 frame body), 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, SCR rated, 1.0 service factor, electrically reversible, rigid removable bolt-on base, sealed bearings. Set of brushes ships in motor, extra set also included.
MTPM-001-1M18    IronHorse permanent magnet DC motor, general purpose, 1 hp, 180VDC armature, 1800 RPM, TEFC, 56C frame face (w/48 frame body), 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, SCR rated, 1.0 service factor, electrically reversible, rigid removable bolt-on base, sealed bearings. Set of brushes ships in motor, extra set also included.
MTPM-1P5-1M18    IronHorse permanent magnet DC motor, general purpose, 1.5 hp, 180VDC armature, 1800 RPM, TEFC, 56C frame face (w/48 frame body), 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, SCR rated, 1.0 service factor, electrically reversible, rigid removable bolt-on base, sealed bearings. Set of brushes ships in motor, extra set also included.
MTPM-002-1M18    IronHorse permanent magnet DC motor, general purpose, 2 hp, 180VDC armature, 1800 RPM, TEFC, 56C frame face (w/48 frame body), 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, SCR rated, 1.0 service factor, electrically reversible, rigid removable bolt-on base, sealed bearings. Set of brushes ships in motor, extra set also included.
    IronHorse Small Permanent Magnet DC Motors (up to 0.25 hp)
MTPM-P10-1JK43    IronHorse permanent magnet DC motor, 1/10 hp, 24VDC, 4252 RPM, 28 oz-in full load torque, 4.83 FLA, 5/16 (0.3125) inch shaft diameter, TENV, rolled steel
MTPM-P13-1JK42    IronHorse permanent magnet DC motor, 1/8 hp, 24VDC, 4224 RPM, 32 oz-in full load torque, 5.39 FLA, 5/16 (0.3125) inch shaft diameter, TENV, rolled steel
MTPM-P17-1JK43    IronHorse permanent magnet DC motor, 1/6 hp, 24VDC, 4290 RPM, 42 oz-in full load torque, 7.54 FLA, 1/2 (0.5) inch shaft diameter, TENV, rolled steel
MTPM-P25-1JK40    IronHorse permanent magnet DC motor, 1/4 hp, 24VDC, 3996 RPM, 80 oz-in full load torque, 12.2 FLA, 1/2 (0.5) inch shaft diameter, TENV, rolled steel
MTPM-P25-1JK44    IronHorse permanent magnet DC motor, 1/4 hp, 24VDC, 4375 RPM, 70 oz-in full load torque, 11.9 FLA, 1/2 (0.5) inch shaft diameter, TENV, rolled steel
MTPM-P03-1L18    IronHorse permanent magnet DC motor, 1/31 hp, 90VDC, 1797 RPM, 18 oz-in full load torque, 0.39 FLA, 5/16 (0.3125) inch shaft diameter, TENV, rolled steel
MTPM-P04-1L17    IronHorse permanent magnet DC motor, 1/26 hp, 90VDC, 1749 RPM, 22 oz-in full load torque, 0.46 FLA, 5/16 (0.3125) inch shaft diameter, TENV, rolled steel
MTPM-P05-1L19    IronHorse permanent magnet DC motor, 1/19 hp, 90VDC, 1917 RPM, 28 oz-in full load torque, 0.68 FLA, 1/2 (0.5) inch shaft diameter, TENV, rolled steel
MTPM-P13-1L19    IronHorse permanent magnet DC motor, 1/8 hp, 90VDC, 1917 RPM, 73 oz-in full load torque, 1.4 FLA, 1/2 (0.5) inch shaft diameter, TENV, rolled steel
MTPM-P14-1L19    IronHorse permanent magnet DC motor, 1/7 hp, 90VDC, 1740 RPM, 86 oz-in full load torque, 1.61 FLA, 1/2 (0.5) inch shaft diameter, TENV, rolled steel
MTPM-P07-1M24    IronHorse permanent magnet DC motor, 1/15 hp, 180VDC, 2440 RPM, 28 oz-in full load torque, 0.42 FLA, 1/2 (0.5) inch shaft diameter, TENV, rolled steel
MTPM-P13-1M19    IronHorse permanent magnet DC motor, 1/8 hp, 180VDC, 1865 RPM, 73 oz-in full load torque, 0.73 FLA, 1/2 (0.5) inch shaft diameter, TENV, rolled steel
MTPM-P14-1M18    IronHorse permanent magnet DC motor, 1/7 hp, 180VDC, 1828 RPM, 84 oz-in full load torque, 0.83 FLA, 1/2 (0.5) inch shaft diameter, TENV, rolled steel
    IronHorse Parallel Shaft DC Gearmotors
MTGP-P06-1J008    IronHorse parallel shaft DC gearmotor, 1/16 hp, 12VDC, 7.9 RPM, 50 in-lb full load torque, 1.39 FLA, 386:1 gear ratio, 5/16 (0.3125) inch shaft diameter
MTGP-P06-1J024    IronHorse parallel shaft DC gearmotor, 1/16 hp, 12VDC, 24 RPM, 50 in-lb full load torque, 2.41 FLA, 120:1 gear ratio, 5/16 (0.3125) inch shaft diameter
MTGP-P06-1J034    IronHorse parallel shaft DC gearmotor, 1/16 hp, 12VDC, 34 RPM, 45 in-lb full load torque, 2.86 FLA, 83:1 gear ratio, 5/16 (0.3125) inch shaft diameter
MTGP-P06-1J050    IronHorse parallel shaft DC gearmotor, 1/16 hp, 12VDC, 50 RPM, 45 in-lb full load torque, 3.88 FLA, 55:1 gear ratio, 5/16 (0.3125) inch shaft diameter
MTGP-P06-1J097    IronHorse parallel shaft DC gearmotor, 1/16 hp, 12VDC, 97 RPM, 36 in-lb full load torque, 5.68 FLA, 26:1 gear ratio, 5/16 (0.3125) inch shaft diameter
MTGP-P20-1J026    IronHorse parallel shaft DC gearmotor, 1/5 hp, 12VDC, 26 RPM, 280 in-lb full load torque, 12.6 FLA, 69:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P20-1J037    IronHorse parallel shaft DC gearmotor, 1/5 hp, 12VDC, 37 RPM, 245 in-lb full load torque, 15.8 FLA, 46:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P20-1J056    IronHorse parallel shaft DC gearmotor, 1/5 hp, 12VDC, 56 RPM, 168 in-lb full load torque, 15.7 FLA, 30:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P20-1J084    IronHorse parallel shaft DC gearmotor, 1/5 hp, 12VDC, 84 RPM, 112 in-lb full load torque, 15.7 FLA, 20:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P20-1J154    IronHorse parallel shaft DC gearmotor, 1/5 hp, 12VDC, 154 RPM, 61 in-lb full load torque, 15.6 FLA, 11:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P20-1K018    IronHorse parallel shaft DC gearmotor, 1/5 hp, 24VDC, 18 RPM, 280 in-lb full load torque, 4.41 FLA, 110:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P20-1K036    IronHorse parallel shaft DC gearmotor, 1/5 hp, 24VDC, 36 RPM, 245 in-lb full load torque, 7.89 FLA, 46:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P20-1K084    IronHorse parallel shaft DC gearmotor, 1/5 hp, 24VDC, 84 RPM, 112 in-lb full load torque, 7.87 FLA, 20:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P20-1K153    IronHorse parallel shaft DC gearmotor, 1/5 hp, 24VDC, 153 RPM, 61 in-lb full load torque, 7.81 FLA, 11:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P06-1L008    IronHorse parallel shaft DC gearmotor, 1/17 hp, 90VDC, 8.4 RPM, 50 in-lb full load torque, 0.19 FLA, 386:1 gear ratio, 5/16 (0.3125) inch shaft diameter
MTGP-P06-1L012    IronHorse parallel shaft DC gearmotor, 1/17 hp, 90VDC, 12 RPM, 50 in-lb full load torque, 0.23 FLA, 269:1 gear ratio, 5/16 (0.3125) inch shaft diameter
MTGP-P06-1L037    IronHorse parallel shaft DC gearmotor, 1/17 hp, 90VDC, 37 RPM, 45 in-lb full load torque, 0.4 FLA, 83:1 gear ratio, 5/16 (0.3125) inch shaft diameter
MTGP-P06-1L055    IronHorse parallel shaft DC gearmotor, 1/17 hp, 90VDC, 55 RPM, 45 in-lb full load torque, 0.54 FLA, 55:1 gear ratio, 5/16 (0.3125) inch shaft diameter
MTGP-P06-1L114    IronHorse parallel shaft DC gearmotor, 1/17 hp, 90VDC, 114 RPM, 26 in-lb full load torque, 0.61 FLA, 26:1 gear ratio, 5/16 (0.3125) inch shaft diameter
MTGP-P14-1L026    IronHorse parallel shaft DC gearmotor, 1/7 hp, 90VDC, 26 RPM, 280 in-lb full load torque, 1.58 FLA, 69:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P14-1L039    IronHorse parallel shaft DC gearmotor, 1/7 hp, 90VDC, 39 RPM, 189 in-lb full load torque, 1.59 FLA, 46:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P14-1L061    IronHorse parallel shaft DC gearmotor, 1/7 hp, 90VDC, 61 RPM, 130 in-lb full load torque, 1.59 FLA, 30:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P14-1L091    IronHorse parallel shaft DC gearmotor, 1/7 hp, 90VDC, 91 RPM, 86 in-lb full load torque, 1.58 FLA, 20:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGP-P14-1L165    IronHorse parallel shaft DC gearmotor, 1/7 hp, 90VDC, 165 RPM, 47 in-lb full load torque, 1.57 FLA, 11:1 gear ratio, 5/8 (0.625) inch shaft diameter
    IronHorse Right Angle Shaft DC Gearmotors
MTGR-P07-1J036    IronHorse right angle DC gearmotor, 1/15 hp, 12VDC, 36 RPM, 50 in-lb full load torque, 5.69 FLA, 50:1 gear ratio, 1/2 (0.5) inch shaft diameter
MTGR-P07-1J084    IronHorse right angle DC gearmotor, 1/15 hp, 12VDC, 84 RPM, 34 in-lb full load torque, 6.78 FLA, 20.5:1 gear ratio, 1/2 (0.5) inch shaft diameter
MTGR-P07-1J177    IronHorse right angle DC gearmotor, 1/15 hp, 12VDC, 177 RPM, 18 in-lb full load torque, 6.78 FLA, 9.75:1 gear ratio, 1/2 (0.5) inch shaft diameter
MTGR-P20-1K023    IronHorse right angle DC gearmotor, 1/5 hp, 24VDC, 23 RPM, 280 in-lb full load torque, 5.64 FLA, 82:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGR-P20-1K039    IronHorse right angle DC gearmotor, 1/5 hp, 24VDC, 39 RPM, 263 in-lb full load torque, 8.74 FLA, 44:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGR-P20-1K075    IronHorse right angle DC gearmotor, 1/5 hp, 24VDC, 75 RPM, 137 in-lb full load torque, 8.72 FLA, 23:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGR-P20-1K174    IronHorse right angle DC gearmotor, 1/5 hp, 24VDC, 174 RPM, 63 in-lb full load torque, 8.75 FLA, 10:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGR-P05-1L038    IronHorse right angle DC gearmotor, 1/19 hp, 90VDC, 38 RPM, 42 in-lb full load torque, 0.68 FLA, 50:1 gear ratio, 1/2 (0.5) inch shaft diameter
MTGR-P05-1L053    IronHorse right angle DC gearmotor, 1/19 hp, 90VDC, 53 RPM, 33 in-lb full load torque, 0.68 FLA, 36:1 gear ratio, 1/2 (0.5) inch shaft diameter
MTGR-P05-1L093    IronHorse right angle DC gearmotor, 1/19 hp, 90VDC, 93 RPM, 23 in-lb full load torque, 0.68 FLA, 20.5:1 gear ratio, 1/2 (0.5) inch shaft diameter
MTGR-P05-1L132    IronHorse right angle DC gearmotor, 1/19 hp, 90VDC, 132 RPM, 17 in-lb full load torque, 0.67 FLA, 14.5:1 gear ratio, 1/2 (0.5) inch shaft diameter
MTGR-P05-1L197    IronHorse right angle DC gearmotor, 1/19 hp, 90VDC, 197 RPM, 12 in-lb full load torque, 0.68 FLA, 9.75:1 gear ratio, 1/2 (0.5) inch shaft diameter
MTGR-P14-1L022    IronHorse right angle DC gearmotor, 1/7 hp, 90VDC, 22 RPM, 280 in-lb full load torque, 1.41 FLA, 82:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGR-P14-1L040    IronHorse right angle DC gearmotor, 1/7 hp, 90VDC, 40 RPM, 185 in-lb full load torque, 1.64 FLA, 44:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGR-P14-1L064    IronHorse right angle DC gearmotor, 1/7 hp, 90VDC, 64 RPM, 116 in-lb full load torque, 1.65 FLA, 28:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGR-P14-1L077    IronHorse right angle DC gearmotor, 1/7 hp, 90VDC, 77 RPM, 97 in-lb full load torque, 1.65 FLA, 23:1 gear ratio, 5/8 (0.625) inch shaft diameter
MTGR-P14-1L178    IronHorse right angle DC gearmotor, 1/7 hp, 90VDC, 178 RPM, 44 in-lb full load torque, 1.64 FLA, 10:1 gear ratio, 5/8 (0.625) inch shaft diameter
    IronHorse DC Motors and Gearmotors Accessories
MTPM-BRUSH-1    DC motor brushes, replacement, one set of 2, for MTPM series PMDC motors 0.33 hp to 1 hp. Note: These are spare/replacement parts; each motor is shipped with one set of brushes installed, as well as one extra set shipped loose.
MTPM-BRUSH-2    DC motor brushes, replacement, one set of 2, for MTPM series PMDC 180VDC motors, 2 hp. Note: These are spare/replacement parts; each motor is shipped with one set of brushes installed, as well as one extra set shipped loose.
MTPM-BRUSH-3    DC motor brushes, replacement, one set of 2, for MTPM series PMDC 90VDC motors, 1.5 hp. Note: These are spare/replacement parts; each motor is shipped with one set of brushes installed, as well as one extra set shipped loose.
MTPM-BRUSH-4    DC motor brushes, replacement, one set of 2, for 1/4 hp and 1/5 hp 12VDC or 24VDC MTPM, MTGR, and MTGP series permanent magnet DC motors and gearmotors. Note: These are spare/replacement parts; each package includes one set of 2 brushes and 2 brush caps.
MTPM-BRUSH-5    DC motor brushes, replacement, one set of 2, for 12VDC or 24VDC MTPM, MTGR, and MTGP series permanent magnet DC motors and gearmotors 1/6 hp and smaller. Note: These are spare/replacement parts; each package includes one set of 2 brushes and 2 brush caps.
MTPM-BRUSH-6    DC motor brushes, replacement, one set of 2, for 1/7 or 1/8 hp 90VDC or 180VDC MTPM, MTGR, and MTGP series permanent magnet DC motors and gearmotors. Note: These are spare/replacement parts; each package includes one set of 2 brushes and 2 brush caps.
MTPM-BRUSH-7    DC motor brushes, replacement, one set of 2, for 90VDC or 180VDC MTPM, MTGR, and MTGP series permanent magnet DC motors and gearmotors 1/10 hp and smaller. Note: These are spare/replacement parts; each package includes one set of 2 brushes and 2 brush caps.
MTGA-KIT-1    DC motor spare parts kit, for 1/4 hp and smaller MTPM, MTGR, and MTGP series permanent magnet DC motors and gearmotors. Includes: one metal brush cap cover, one terminal box, one 1/8 (0.125) inch shaft key and one 3/16 (0.187) inch shaft key.
GPSTLnotes    IronHorse Rolled Steel General Purpose AC Motors
MTR-P33-1AB18    IronHorse AC induction motor, general purpose, 0.33 hp, 1-phase, 115/208-230V, 1800 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design N, electrically reversible, capacitor start, removable bolt-on base
MTR2-P33-1AB36    IronHorse AC induction motor, general purpose, 0.33 hp, 1-phase, 115/230V, 3600 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA Design N, electrically reversible, removable bolt-on base
MTR-P50-1AB18    IronHorse AC induction motor, general purpose, 0.5 hp, 1-phase, 115/208-230V, 1800 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design N, electrically reversible, capacitor start, removable bolt-on base
MTR2-P50-1AB36    IronHorse AC induction motor, general purpose, 0.5 hp, 1-phase, 115/230V, 3600 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA Design N, electrically reversible, removable bolt-on base
MTR-P75-1AB18    IronHorse AC induction motor, general purpose, 0.75 hp, 1-phase, 115/208-230V, 1800 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design N, electrically reversible, capacitor start, removable bolt-on base
MTR2-P75-1AB36    IronHorse AC induction motor, general purpose, 0.75 hp, 1-phase, 115/230V, 3600 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA Design N, electrically reversible, removable bolt-on base
MTR-001-1AB18    IronHorse AC induction motor, general purpose, 1 hp, 1-phase, 115/208-230V, 1800 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design N, electrically reversible, capacitor start, removable bolt-on base
MTR2-001-1AB36    IronHorse AC induction motor, general purpose, 1 hp, 1-phase, 115/230V, 3600 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA Design N, electrically reversible, removable bolt-on base
MTR2-1P5-1AB18    IronHorse AC induction motor, general purpose, 1.5 hp, 1-phase, 115/230V, 1800 RPM, TEFC, 56HC frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA Design L, electrically reversible, removable bolt-on base
MTR-1P5-1AB18    IronHorse AC induction motor, general purpose, 1.5 hp, 1-phase, 115/208-230V, 1800 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design N, electrically reversible, capacitor start, removable bolt-on base
MTR2-1P5-1AB36    IronHorse AC induction motor, general purpose, 1.5 hp, 1-phase, 115/230V, 3600 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA Design L, electrically reversible, removable bolt-on base
MTR-1P5-1AB36    IronHorse AC induction motor, general purpose, 1.5 hp, 1-phase, 115/208-230V, 3600 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design N, electrically reversible, capacitor start, removable bolt-on base
MTR2-002-1AB18    IronHorse AC induction motor, general purpose, 2 hp, 1-phase, 115/230V, 1800 RPM, TEFC, 56HC frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA Design L, electrically reversible, removable bolt-on base
MTR2-002-1AB36    IronHorse AC induction motor, general purpose, 2 hp, 1-phase, 115/230V, 3600 RPM, TEFC, 56HC frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA Design L, electrically reversible, removable bolt-on base
MTR-P33-3BD36    IronHorse AC induction motor, general purpose, 0.33 hp, 3-phase, 208-230/460V, 3600 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design B, electrically reversible, removable bolt-on base, 5:1 variable torque rating, 2:1 constant torque rating
MTR-P33-3BD18    IronHorse AC induction motor, general purpose, 0.33 hp, 3-phase, 208-230/460V, 1800 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design B, electrically reversible, removable bolt-on base, 5:1 variable torque rating, 2:1 constant torque rating
MTR-P50-3BD36    IronHorse AC induction motor, general purpose, 0.5 hp, 3-phase, 208-230/460V, 3600 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design B, electrically reversible, removable bolt-on base, 5:1 variable torque rating, 2:1 constant torque rating
MTR-P50-3BD18    IronHorse AC induction motor, general purpose, 0.5 hp, 3-phase, 208-230/460V, 1800 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design B, electrically reversible, removable bolt-on base, 5:1 variable torque rating, 2:1 constant torque rating
MTR-P75-3BD36    IronHorse AC induction motor, general purpose, 0.75 hp, 3-phase, 208-230/460V, 3600 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design B, electrically reversible, removable bolt-on base, 5:1 variable torque rating, 2:1 constant torque rating
MTR-P75-3BD18    IronHorse AC induction motor, general purpose, 0.75 hp, 3-phase, 208-230/460V, 1800 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design B, electrically reversible, removable bolt-on base, 5:1 variable torque rating, 2:1 constant torque rating
MTR-001-3BD36    IronHorse AC induction motor, general purpose, 1 hp, 3-phase, 208-230/460V, 3600 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design B, electrically reversible, removable bolt-on base, 5:1 variable torque rating, 2:1 constant torque rating
MTR-001-3BD18    IronHorse AC induction motor, general purpose, 1 hp, 3-phase, 208-230/460V, 1800 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design B, electrically reversible, removable bolt-on base, 5:1 variable torque rating, 2:1 constant torque rating
MTR-1P5-3BD36    IronHorse AC induction motor, general purpose, 1.5 hp, 3-phase, 208-230/460V, 3600 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design B, electrically reversible, removable bolt-on base, 5:1 variable torque rating, 2:1 constant torque rating
MTR-1P5-3BD18    IronHorse AC induction motor, general purpose, 1.5 hp, 3-phase, 208-230/460V, 1800 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design B, electrically reversible, removable bolt-on base, 5:1 variable torque rating, 2:1 constant torque rating
MTR-002-3BD36    IronHorse AC induction motor, general purpose, 2 hp, 3-phase, 208-230/460V, 3600 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design B, electrically reversible, removable bolt-on base, 5:1 variable torque rating, 2:1 constant torque rating
MTR-002-3BD18    IronHorse AC induction motor, general purpose, 2 hp, 3-phase, 208-230/460V, 1800 RPM, TEFC, 56C frame, 5/8 (0.625) inch diameter shaft, rolled steel, Class F insulation, NEMA design B, electrically reversible, removable bolt-on base, 5:1 variable torque rating, 2:1 constant torque rating
GPCAPSnotes    Spare Parts for Rolled Steel AC Motors
MTA-CAP-01    Start capacitor, replacement, for 0.33 hp 1800RPM IronHorse MTR series 1-phase AC motors (not compatible with MTR2 series)
MTA-CAP-02    Start capacitor, replacement, for 0.5 and 0.75 hp 1800RPM IronHorse MTR series 1-phase AC motors (not compatible with MTR2 series)
MTA-CAP-03    Start capacitor, replacement, for 1 hp 1800RPM IronHorse MTR series 1-phase AC motors (not compatible with MTR2 series)
MTA-CAP-04    Start capacitor, replacement, for 1.5 hp 1800RPM IronHorse MTR series 1-phase AC motors (not compatible with MTR2 series)
MTA-CAP-06    Run capacitor, replacement, for 1.5 hp 1800 RPM IronHorse MTR series 1-phase AC motors (not compatible with MTR2 series)
MTA-CAP-08    Start capacitor, replacement, for 1.5 hp