burkert電磁閥0340 C 8.0 NBR MS G1/4 0.5 -16bar
①氣動閥啟閉程度的刻度線,應鑄造在變速箱蓋上或轉換方向后的顯示盤的外殼上,一律面向地面,刻度線刷上熒光粉,以示醒目;
②指示盤針的材質在管理較好的情況下可用不銹鋼板,否則為刷漆的鋼板,切勿使用鋁皮制作;
③指示盤針醒目,固定牢靠,一旦啟閉調節準確后,應以鉚釘鎖定。若氣動閥埋設較深,操作機構及顯示盤離地面距離≥1.5m時,應設有加長桿設施,且固定穩牢,以便人們從地面上觀察及操作。也就是說,管網中的閥門啟閉操作,不宜下井作業。Once the opening and closing adjustment is accurate, the lock should be riveted. If the pneumatic valve is embedded in depth, the operating mechanism and the display disc shall be at least 1.5m from the ground, and should be equipped with an extended rod facility, which shall be kept firmly in place so that people can observe and operate from
burkert電磁閥0340 C 8.0 NBR MS G1/4 0.5 -16bar
更多的寶德產品信息歡迎您隨時與我們。