寶德電磁閥burkert 134155Technical parameters of size: 1.2 1.6 mm connectors: G1/8 - G1/4, Flange valve body material: brass or stainless steel sealing material: FPM applicable medium: suitable for water, air and other general neutral medium medium temperature: - 10 to + 100 ℃ pressure range: 0 to 10 bar power: / DC 24 v, 24 v/AC, 110 v/AC, 230 v/AC 50 hz protection: with IP cable socket 65
技術參數通徑: 1.2-1.6mm連接口:G1/8—G1/4,F(xiàn)lange閥體材質:黃銅或不銹鋼密封材質:FPM適用介質:適用于水,空氣等一般中性介質介質溫度:-10to +100℃壓力范圍:0-10bar電源:24V/DC,24V/AC,110V/AC,230V/AC,50HZ防護: 帶電纜插座IP 65
寶德電磁閥burkert 134155
According to the fluid parameters select the solenoid valve: material, temperature group
1. Corrosive fluid: suitable for anti-corrosion solenoid valve and all-stainless steel; Edible ultra-clean fluid: choose food grade stainless steel valve.
2. High temperature fluid: choose the solenoid valve manufactured by high temperature resistant electrical material and sealed material, and choose piston type structure type.
3. Fluid status: large to gas, liquid or mixed state, especially if the aperture is larger than DN25.
4. Fluid viscosity: it is usually optional below 50cSt, and high viscosity solenoid valve is preferred if it exceeds this value. 5
據流體參數選擇電磁閥的:材質、溫度組
1、腐蝕性流體:宜選用耐腐蝕電磁閥和全不銹鋼;食用超凈流體:宜選用食品級不銹鋼材質電磁閥。
2、高溫流體:要選擇采用耐高溫的電工材料和密封材料制造的電磁閥,而且要選擇活塞式結構類型的。
3、流體狀態:大至有氣態,液態或混合狀態,特別是口徑大于DN25訂貨時一定要區分開來。
4、流體粘度:通常在50cSt以下可任意選擇,若超過此值,則要選用高粘度電磁閥。
更多寶德產品和選型可以咨詢銷售人員。