智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
Introduction
This manual explains the use and care of 14” rigging sheaves manufactured by Wireline Technologies, Inc. The sheave is available in two
models. The original model has shielded bearings and is identified by an orange cover. The sealed bearing model is identified by a yellow
cover. Each is available in two configurations. The no-shroud configuration, shown in figure 1, will allow a rope socket or “torpedo” to pass
over the wheel. The half-shroud configuration, shown in figure 2, has a cable shroud covering part of the wheel to aid in containing the line
in the wheel groove. Please read and become familiar with all of the information in this manual before using this equipment.
Warnings
• Read entire manual before operating this equipment.
• If proper procedures are not followed, loads may disengage.
• A falling load can cause serious injury or death.
• Never use this product for hoisting personnel.
• Always anchor or hang the sheave via the clevis, never by way of the cover or any ancillary equipment.
• Never apply more force than the Safe Working Load （SWL） listed on the affixed tag.
• The listed Safe Working Load is for the sheave assembly; the safe line tension will be less.
• Attachment to other equipment with lower SWL will reduce the allowable load.
• Always use a hand guard when the sheave is used around personnel.
• Always make sure the sheaves are properly maintained and properly rigged.
No-Shroud （Optional）
Figure 1
Half-Shroud （Standard）
Figure 2 2
Safe Working Load
The rated safe working load （SWL） for a WTI 14” sheave is 15,000 lbs. （6,800 kg.）, with the exception of those manufactured for
Schlumberger. These sheaves, as directed by Schlumberger, have a safe working load of 10,000 lbs. （4,530 kg.）. The allowable line pull will
depend upon both the SWL and the angle the line is deflected. If the sheave is used as a top sheave, it deflects the line 180°, see figure 3. If
the sheave is used as a bottom sheave, it deflects the line 90°, see figure 4. Never exceed the SWL, unless special precautions are taken in
accordance with your company’s policy. These precautions should include, but are not limited to, clearing the rig floor of all personnel. If
the SWL is exceeded, the sheave should be re-certified before it can safely be placed back in service.
Top Sheave
Max. line tension
7,5000 lbs. （3,400 kg）
Schlumberger Limit
Max. line tension
5,000 lbs （2,260 kg）
Bottom Sheave
Max. line tension
10,600 lbs. （4,800 kg）
Schlumberger Limit
Max. line tension
7,070 lbs （3,200 kg）
Safe Line Tension for
90-Degree Deflection
Figure 4
Safe Line Tension for
180-Degree Deflection
Figure 3 3
Clevis Options
Five clevis swivel assembly options for suspending/anchoring the sheave are available: These options are shown in figures 5 – 9 below. The
Clevis-Eye has an opening about 2.5” X 3.3” for a chain or sling. The opening width of the Clevis -AWS is 1 3/4” with a hole for a 1” pin.
The opening width of the Clevis -HLS is 1 1/4” with a hole for a 1” pin
深圳市灣邊貿易有限公司主要經營進口機械配件、儀器等的境外采購。
包括:國外詢價、進口清關、運輸、境外付款等一條龍進口服務。在國外詢價、關稅及運作效率上有一定的優勢。
優勢
（1） 國外詢價---- 豐富的境外詢價經驗，能較快聯系到境外的供應商，并獲得他們的Z低報價。
（2） 進口清關----優惠的關稅， 并能較快通過進口3C、商檢、許可證等方面的限制。出口同樣具有本 項優勢。
（3） 高效運作----1.國外詢價、催貨專人電話跟蹤 。2.境外付款、核銷方便快捷。3.貨運自行安排管理，運費優惠、速度快。
（4）6天*24小時工作，與歐美聯系不受時差影響。
Dayton,Opto 22,SycoTec,ISO-TECH,King Instrument,Partlow,Humphrey,Teledyne,R.D.Mathis
品牌: Rigging Sheaves
型號:1, G2-17-7/32-2000A, 17” G2 Rigging Sheave (7/32”) w/AWS Clevis.
廠家:美國Wireline Technologies www.
G2-17-7/32-2000A, 17” G2 Rigging Sheave （7/32”） w/AWS Clevis. 產品信息
同類產品推薦
在找 G2-17-7/32-2000A, 17” G2 Rigging Sheave （7/32”） w/AWS Clevis. 產品的人還在看
