廣州市朝德機電設備有限公司

：
：鄭杰克、向
： novosor     : www.novosor.com
地址：廣州市越秀區朝天路66號3F

業代理德DIATEST Hermann Koeltgen GmbH孔徑量?jī)x A

產品系列：

Plug Gauge

• Self-centring high-precision indicating plug gauge allowing static and dynamic measuring
• Application in manufacturing of high-precision bores from Ø 2.98 mm to 270 mm/0.117" to 10.62"
• Measuring range: 0.1 mm to 0.8 mm depending on diameter and type
• Calibration in setting ring
• Various contact points （material and design） depending on work-piece type
• Many designs in standard programme
• Special design on request
• Extensive range of accessories
• Setting rings according to DIN2250-C in standard programme （range Ø 1 mm to 300 mm/0.04" to 11.8"）
• Holders and depth extensions are manufactured from temperature stabilised material, ensuring minimal gauging errors.

Split-Ball Probe

• Universal bore gauge for indicating bore gauging
• Modular design system with extensive range of accessories, enables gauging of most bores.
• Application range: Ø 0.47 mm to 41.3 mm/0.02" to 1.6" （in 3-point version up to 150 mm/5.9"）
• Calibration in setting master
• Styles for blind bores （FB） and parallel distances （PA） included in standard programme
• Special designs on request
• Setting rings according to DIATEST company standard or to DIN 2250-C in standard programme

Plunger Probe

• Modular design, universal bore gauge system for larger bores （M5678 and M68-FB）
• Large measuring range （± 1.5 mm）
• Application range: Ø 26.3 mm to 330 mm/1.03" to 13" （Ø 38.5 mm to 348 mm/ 1.5" to 13.7" for blind bore FB）
• Calibration in setting master or micrometer
• Adaptability to most bore gauging applications
• Blind bore type （FB） in standard programme
• Tungsten carbide contact points
• Holders and depth extensions are manufactured from temperature stabilised material, ensuring minimal gauging errors.

Chamfer Gauge

IKT and IKT-OS

AKT

General

• Measuring surface and hardened steel taper
• Scale graduation of indicators: 0.01 mm
• Calibration at factory or via setting master
• Special designs on request

Internal taper gauge （IKT）

• Direct gauging of major diameter of internal tapers or tapered slots
• Models with 60°, 90° and 127° taper
• Application range: Ø 0.5 mm to 120 mm
• Measuring range: 11.5 mm for 60° taper/19.5 mm for 90° and 127° taper

The low-cost Alternative: The Internal Taper Gauge IKT-OS
 
The term OS is an abbreviation which means “without stop bar”. By the omission of the bar, the alternative internal taper gauge can be manufactured at a lower cost which in turn renders a favourable sales price.
 
The IKT-OS is implemented to measure the largest diameter of internal tapers or tapered grooves. In contrast to its brother product, the IKT-OS requires a contact surface and cannot be used with thin-walled work pieces.
 
Available in the following models:

• IKT90-1-OS Measuring range 0,5-20
• IKT90-2-OS Measuring range 20-40
• IKT60-1-OS Measuring range 0,5-12
• IKT60-2-OS Measuring range 10-21
• IKT127-1-OS Measuring range 0,5-20

 
Standard setting masters can be utilised, as well as the corresponding dial indicator or digital dial indicator IKT-MU1086W.
 
Available on request.

External taper gauge （AKT）

• Direct gauging of minor diameter of external taper
• Models with 60°, 90° and 127° plungers
• Application range: Ø 5 mm to 120 mm
• Measuring range: 11 mm for 60° plunger/19.5 mm for 90° and 127° plunger （except for size 1）

Chamfer gauge （KT/KT-B）

• Direct gauging of 45° chamfers on rectangular and cylindrical pieces, even bores or slots
• Measuring range: chamfers up to 7 mm （radii 1 mm up to 9.5 mm via conversion）
• Chamfers in bores from approx. Ø 28 mm

Gear Gauges

External and internal gear gauges

Internal gear gauges （IV）

• For gauging of measurement between balls （Mi）
• Constructed in the same way as the split-ball and plunger probe system
• Application range: Mi = 3.5 mm up to 333 mm/ 0.14" to 13"
• Measuring range: 0.6 mm to 1.6 mm for split-ball system （Mi = 3.5 mm to 26.1 mm/0.14" to 1.03"） 3 mm for plunger probe system （Mi = 26.1 mm to 333 mm/ 1.03" to 13"）
• Split-ball and plunger probe accessories can be applied
• Tungsten carbide measuring balls
• Special designs and gauge slides on request

External gear gauges （AV）

• For gauging of measurement across balls （Ma）
• Application range: Ma = 10 mm to 140 mm/0.4" to 5.5"
• Measuring range: 30 mm/1.2"
• Tungsten carbide measuring balls
• For use in MST-102 measuring stand

DIATEST TD-Gauge+

The DIATEST TD-Gauge⁺ allows the simultaneous gauging of thread depth and detecting of No-Go gauges.

With the DIATEST TD-Gauge⁺ you can use DIN-gauges of all manufacturers. Thus you are not tied into a supplier who is expensive or located far away, but you can choose the most favourable provider among a variety of suppliers. DIATEST also offers DIN-gauges that are assembled within the factory when a complete thread depth gauge is ordered

The DIATEST TD-Gauge⁺ can be used with thread gauges as well as with cylinder plug gauges. This offers a maximum flexibility in handling for you, as you only have to exchange the related gauges （which you can purchase from a DIN-Gauge manufacturer of your choice e.g. DIATEST） thanks to the universal application of the system.

The DIATEST TD-Gauge⁺ is very ergonomically designed, the viewing panel with the vernier always remains visible to the user when the gauge is screwed in. You can conveniently and at any time see the detected value. In the same viewing panel the pre- and post decimal places can be read of simultaneously.

The possible reading accuracy is 0,05 mm, this is a very high accuracy for a mechanical thread depth gauge, particularly compared to the digital thread depth gauges that usually have an accuracy of up to 0,01 mm, however, these are much more expensive.

You can choose an individual marking for the DIATEST TD-Gauge⁺. This can be done directly at the factory provided that the order is marked accordingly. On request we can realize special depths and stops at any time.

DIATEST TD-Gauges⁺ are exclusively manufactured by DIATEST, the specialist for accuracy and precision in metrology. You have the guarantee to receive high-quality products "Made in Germany" and "Made by DIATEST"

DIATEST-products are not only sold all over the world, but we also offer a worldwide after-sales and consulting service. You are not alone with your problems or questions.

TD-Gauge+ thread gauge available also with dirt groove

Thread gauge

• Measures the thread depth with an accuracy of 0,05 mm 
• Checks the depth quality using the Go/No-Go-gauge
• Available in gauging steel or hard-chrome plated version
• Dirt groove as an option, recommended for Go-Gauge
• Available in four sizes
  
  
  
   

TD-Gauge+ cylinder plug gauge with air groove

Cylinder plug gauge

• Measures the bore depth with an accuracy of 0,05 mm
• Checks the diameter using the Go/No-Go-gauge
• Available always in hard-chrome plated version
• Air groove as an option, recommended for Go-gauge
• Available in four sizes

DIATEST Universal-setting-gauge

For the DIATEST TD-Gauge⁺ you can in additon buy a universal setting gauge. This universal setting gauge can be used for all DIATEST TD-Gauges⁺ （thread gauges and cylinder plug gauges） from size 02 to 05.

Dial Indicators

MU1m, MDU125, F1000

Analodig （ANA）

MU1m/MU01Z

• Scale graduation: 0.001mm or 0.0001“
• Travel: 1 mm/0.04“
• Accuracy according to DIATEST standard
• Various measuring pressures

MU10m/MU1Z

• Scale graduation: 0.01 mm or 0.001“
• Travel: 10 mm/0.5“
• Accuracy according to DIN 878 or DIATEST standard
• Various measuring pressures

Micro comparator （F1000）

• Scale graduation: 0.001 mm
• Measuring range: ± 0.05 mm
• Accuracy according to DIN 879
• Various measuring pressures

MDU125

• Measuring range: 12.5 mm or 0,5“
• Resolution: 0.01 mm/0.001 mm （0.0005“/0.00005“）
• LCD digital display
• Can be switched from mm to inch
• Data output: opto-RS232
• Model MDU-A with traffic light display and min/max function
• Model MDU-M with min/max function （only for split-ball and plunger probes）

Analodig （ANA）

• Measuring range: ± 0.2 mm digital/± 0.05 mm analogue
• Resolution: 0,001 mm
• Optional with output similar to RS232 and min/max-function

DIATRON

DIATRON1000 with data transmission

DIATRON6000

DIATRON2200

DIATRON1000

• Complete system with display of 7 decimal places
• High data security by radio transmission （optionally）
• Resolution: 0.0001 mm
• Travel: 4 mm, high precision down to 0.0002 mm
• static or dynamic measurements possible （Max/Min/Difference）
• Coloured （red-green-yellow） display of tolerances can be switched for all measuring modes
• Switch mm/inch
• Transfer of measured values to RS232- or USB-interface
• Operation time up to 4.000 h or 2.000.000 date transmissions without change of battery
• Operating distance up to 200 m
• Splashproof up to IP65

DIATRON6000

• 4 Channel display unit with memory storage of readings and statistical functions
• Simple and intuitive touch screen operation
• Colour digital and analogue display
• USB interfaces
• 4 Connections for inductive probes
• Various displays （bar graph, histogram, control chart, record）
• Statistical evaluation （data storage in Excel, csv- and QS-Stat）
• Storage of up to 7.800 readings per channel
• Internal and external measurement
• Different types of measurement （static, dynamic, max/min, trigonometric etc.）
• Connection of probes （shape and position tolerances）
• Connection to TESA compatible probes
• Software included for compilation of data programmes and data conversion

DIATRON2200

Electronic column with 3-colour bar-scale （red, yellow, green） and digital display. The column has an automatic function detecting the actual interface in use. Programming of unit is made by the rotary-push-button on the front side or by software. The column can be equipped with modules for 1, 2 or 4 probes （HBT）. Connecting of other measuring systems on request.

Measuring and indicating functions

• Static mode
• Dynamic mode （Min, Max, Average, position tolerance, bore measuring mode with automatic function）
• Range / Resolution: 3,0 mm/0.1µm - 0,12/0.00001 inch und ±30mm/1µm; 1,2/0.0001 inch for inductive probes 

Unit: mm and Inch
 
Range of bar scale:

• ± 5,0000 mm/± 0,50000“
• ± 1,5000 mm/± 0,15000"
• ± 0,5000 mm/± 0,05000"      
• ± 0,1500 mm/± 0,01500"
• ± 0,0500 mm/± 0,00500"
• ± 0,0150 mm/± 0,00150"
• ± 0,0050 mm/± 0,00050"

Power supply: 100 ... 240VAC, 45 ... 60Hz
 
Interfaces:

• Interface RS232: 9-pin SUB-D plug, hardware EIA RS232 standard; data format according to OPTO RS232
• Protection category: front side IP65 （ CEI / IEC 529 ）

DIATRON 1000 with data transmission

The Diatron 1000 is the flagship of a new generation of Diatest-measuring instruments of extremely high precision  and with flexible and safe data transmission.

The Diatron1000 is a complete and very flexible measuring system for internal and external measurement with integrated precision display （7 places）

Despite its robustness, the Diatron 1000 fits comfortably in the hand and allows easy operation even in difficult measuring situations. With just 2 push buttons, the operator can handle the holder easily in any position and display the measuring result directly.

But there are 2 other features which make the Diatron1000 unique:  along unique precision of  1/10 µ （or 0,0002mm）, with a the Diatron 1000 can transmit the measured result as an option by safe radio transmission with an operating distance up to 200 m. 

Real radio transmission （Wireless）

The Diatron 1000 can transfer the measured data by means of the optional Diatest radio transmission module.  This way, you can achieve distances of 200 m outside of buildings. The operating distance inside of buildings is up to 20 m.

The data is then captured by receiver modules which can be connected to any commercially available PC by USB-or RS232-interface. The electronic column Diatron2200 and Diatron6000 can receive measured data by an appropriate module.

Measured results are transferred safely and compley by using real radio transmission. Up to 120 devices can be connected to one  receiver.

High precision

The Diatron1000 has an unbelievable precision of 0,0002mm. It can display the fourth decimal place precisely and stably. （This requires a  display resolution of 0,0001 mm.）

Alternatively: cable

The measured result can be transferred optionally via cable to any commercially available PC with USB or RS232-interface or to DIATRON2200 and DIATRON6000. The cable can also be used for programming.

Display of tolerances

The Diatron1000 has a coloured （red-green-yellow） display of tolerances which can be used in all measuring modes. This way, you can easily evaluate the quality of the component directly at the point of manufacture.

Metric-inch

Measured values can be displayed at any time in metric or inch-version.

The Diatron1000 has a 4 mm travel. Programming can be done directly at the measuring instrument. Operating time is up to 4000 h or 2 Mio. data transmissions.

The Diatron1000 permits static and dynamic measurement （Max/Min/difference） and is splashproof up to IP65 and protected from foreign matter.

Software for reception of measured results on PC is free of charge and can be used immediay.

The Diatron1000 can be equipped with both sizes of connecting threads M6x0,75 and M10x1. Thereby, angle position of BMD is continuously variable.

Coming soon!!!