


Thin film pressure measuring
technology
Extremely accurate over wide
temperature range ≤±1% up to 100°C
Measuring ranges from 20 to
2,000kgf/cm2
All stainless steel construction for wetted
areas in harsh environments
Zero and span adjustments
Degree of protection IP65 or
IP67(option)
Optimal accuracy ±0.3% FSO
Welding construction
Applications
The transmitters can be used for a wide
range of applications in process control,
automatic machinery and
hydraulic or pneumatic system design.
High pressure hydraulic equipments
and process control
Machine tools and automatic
machinery
Injection molding and water jet cutting
machines
Irrigation and sprinkler systems
Trucks and earth moving equipments
Air and gas compressors
Loading monitoring of crane and brake
systems for railway systems
Fuel injection monitoring
pressure transmitters use the latest thin film strain gauge
technology on stainless steel diaphragms to provide the
user with high accuracy and stability over a wide
pressure range for industrial and automotive applications.
These pressure transducers and transmitters with the
latest sensing technology perform in demanding
environments such as power plants, water treatment
facilities, aircraft and marine hydraulic systems, nuclear
testing, flight-qualified systems, and a number of energy
management and climate control systems.
This transmitter can be easily modified to cover pressure
ranges from 20 to 2,000kgf/cm2.
It is extremely versatile and suitable for measuring
dynamic and static pressure. The transmitters are
available as absolute and relative pressure types with
either 2-wire current or 3-wire voltage output.
Pressure ranges 0~20 to 0~2,000kgf/cm2 gauge pressure
Pressure reference Gauge
Overload 5 × full scale without damage
Un-amplified 1.7, 2.0, 2.3m V/V (Maximum 10V)
Electrical connection type 2-wire technique 3-wire technique
Full scale output signal 20mA ±0.2% 5V ±0.2%
Zero measured output 4mA ±0.05% 1V ±0.05%
Other signals available on request
Excitation voltage 12~36V DC
Load resistance max@24V 500Ω at 24V
Influence of excitation 0.01% FSO/V
Power ripple ≤500mV P-P
Reverse polarity Protected
Shock resistance ≤20g
Response time 1.5ms
Adjustment ±10% FSO/zero and span
Accuracy ≤±0.3% FSO
Linearity, Hysteresis & Repeatability ±0.2% FSO typical
Longterm stability ±0.1~0.25% FSO over 5years
Cutoff frequency(-3 d B) ≤2kHz
Service life Approx. 100,000,000cycles
Reference temperature 25°C
Operating temperature range -54~149°C
Compensated temperature range -18~82°C
Thermal sensitivity shift ≤±0.02%/°C typical
Thermal zero shift ≤±0.02% FSO/°C typical
Process connection PT1/4″, PT3/8″, PT1/2″male thread
PF1/4″, PF3/8″, PF1/2″male thread
Female thread & other connections available on request
Process media Gases and liquids compatible with stainless steel
Materials wetted by process Diaphragm : Stainless steel
Housing : Stainless steel 316
Enclosure rating IP65
Explosion protection Ex d IIC T6(P139)
Influence of mounting position Not critical
Weight Approx.(270g)
Options Sealed diaphragm with thread connection
Sealed diaphragm with flange mounting
Siphon tube
Sealed diaphragm with capillary
Note : ① P130 Series is only available with gauge pressure
② Cable version : 1.5m standard length, 4-wire, shielded with integral vent tube
③ Vented gauge units must breathe dry, non - corrosive gases.
④ Connector version is vented through the removed pin, cable versions are vented through a vent tube inside
the cable sleeve
Input
Output
Electrical Specifications
Performance Specifications
Physical Specifications