騰達試驗儀器廠：

　　實驗室砂磨機是檢測儀器，用于實驗室內涂料填加料的粉碎研磨。利用研磨與試料在罐內急速旋轉。翻動產生強烈的拉剪和沖擊，以達到試料的研磨、分散。

　　The laboratory sａnd mill is a testing instrument for the grinding and grinding of coatings in the laboratory.Grind and sample quickly rotate in the tank.Turning produces strong pull-shear and impact to achieve the grinding and dispersion of the sample.

　　實驗室砂磨機技術參數：

　　★攪拌器轉速1400r/min

　　★研磨罐尺寸：100×200mm

　　★容積;1.5L

　　★磨料：直徑2-4.5mm鋼化玻璃球

　　★電源：380V 50HZ

　　★應用性能：磨料：500-700g

　　★試料：500-700g

　　★外形尺寸：396X223X700mm

　　★產品總重量：70KG

　　★試料經研磨分散后細度可達25μm以下

　　Technical parameters of laboratory sａnd mill:

　　★Agitator speed:1400r/min

　　★Grinding tank size:100×200mm

　　Volume;1.5L

　　★Abrasive:Tempered glass ball with diameter of 2-4.5mm

　　★Power supply:380V 50HZ

　　★Application performance:Abrasive:500-700g

　　★Sample:500-700g

　　★Dimensions:396X223X700mm

　　★Total product weight:70KG

　　★The fineness of the sample can be less than 25μm after grinding and dispersion.

　　實驗室納米砂磨機特點：

　　★**小的研磨腔體，適合**小批量的快速研磨；

　　★自循環式研磨工藝，無需泵浦，殘留**少，小批量200ml；

　　★研磨部分可選用不同材料。如：氧化鋯、碳化硅、氧化鋁、PU、耐磨合金；

　　★采用自主研發高性能雙端面機械密封，安全可靠無泄漏；

　　★可采用0.2-2.0mm研磨介質，產品細度可達100-2000nm；

　　★采用特殊的渦輪加速器，研磨效率**高，粒徑分布狹

　　Laboratory nano sａnd mill features:

　　★**Small grinding cavity,suitable for fast grinding of small batches;

　　★Self-circulating grinding process,no pump required,minimal residue,200ml in small batches;

　　★The grinding part can be made of different materials.Such as:zirconia,silicon carbide,alumina,PU,wear-resistant alloys;

　　★Adopt independent research and development of high-performance double-end mechanical seal,safe and reliable without leakage;

　　★0.2-2.0mm grinding medium can be used,ａnd the product fineness can reach 100-2000nm;

　　★Using a special turbo accelerator,the grinding efficiency is**high,ａnd the particle size distribution is narrow

　　實驗室砂磨機主要類型：

　　★與傳統工業生產用砂磨機類似，

　　★按照安裝結構區分有：立式、臥式等；

　　★按照研磨腔內部轉子結構區分有：葉片式、棒銷式、渦輪式、渦輪棒銷式等；

　　★按照研磨腔體內部材質區分有：合金鋼式、鎢鋼式、陶瓷式、硬朔料式等；

　　★按照研磨**小細度來區分有：納米式（研磨顆粒細度達到100納米以下）、非納米式等；

　　Laboratory sａnd mill main types

　　★Similar to the sａnd mill for traditional industrial production,

　　★Divided according to the installation structure:vertical,horizontal,etc.;

　　★According to the rotor structure inside the grinding chamber,there are:blade type,rod pin type,turbine type,turbine pin type,etc.;

　　★According to the internal materials of the grinding cavity,there are:alloy steel type,tungsten steel type,ceramic type,hard material type,etc.;

　　★According to the grinding**small fineness,it is divided into:nano-type(grinding particle size below 100 nanometers),non-nano-type,etc.;