騰達試驗儀器廠:
磚瓦爆裂蒸煮箱是檢測儀器,用于燒結普通磚、燒結多孔磚、空心磚和空心砌塊磚、燒結粘土磚、免燒磚、粉煤灰磚、爐渣磚和碳化磚等的爆裂、吸水率、安定性、水中加熱試驗。使用前務必仔細閱讀說明書。并由專業實驗人員操作,以避免操作不當引起的傷害。如需了解更多資料請與我公司客服人員聯系。
The brick burst cooking box is a professional testing instrument for bursting and absorbing water of ordinary bricks,sintered porous bricks,hollow bricks and hollow block bricks,sintered clay bricks,burn-free bricks,fly ash bricks,slag bricks and carbonized bricks.Rate,stability,water heating test.Be sure to read the instructions carefully before use.It is operated by professional experimenters to avoid injury caused by improper operation.For more information,please contact our customer service staff.
磚瓦爆裂蒸煮箱按GB/T5101-1998《燒結普通磚》和GB/T2542-2003《砌墻磚試驗方法》中關于磚瓦的石灰爆烈試驗而設計制造的,能自動控制箱內溫濕度,由上海榮計達儀器科技有限公司提供,是檢測磚瓦產品質量的設備之一。設備質保期一年,一年內產品如有質量問題,供方負責免費維修。如果因操作不當或者人為損壞,我公司亦應提供維修、更換服務,由此產生的費用我公司會酌情收取。
The brick blasting cooking box is designed and manufactured according to GB/T5101-1998"Sintered ordinary brick"and GB/T2542-2003"wall-wall brick test method"for the lime-burst test of brick and tile,which can automatically control the temperature and humidity inside the box.Provided by Shanghai Rongjida Instrument Technology Co.,Ltd.,it is one of the equipment for testing the quality of brick and tile products.The equipment warranty period is one year.If the product has quality problems within one year,the supplier is responsible for free maintenance.If the operation is improper or man-made damage,our company should also provide repair and replacement services,and the expenses incurred by the company will be charged as appropriate.
磚瓦爆裂蒸煮箱技術參數:
★電壓:AC220V
★功率:3KW+1KW
★溫度:調到沸點
★升溫時間:小于40分鐘
★內尺寸:550×330×400
★外形:350×830×550mm
Brick tile burst cooking box technical parameters:
★Voltage:AC220V
★Power:3KW+1KW
★Temperature:adjust to boiling point
★Heating time:less than 40 minutes
★Inner size:550×330×400
★Shape:350×830×550mm
磚瓦爆裂蒸煮箱適用范圍:
1、燒結普磚2、空心磚3、燒結粘土瓦4、空心砌塊
使用性能
1、石灰爆裂試驗2、吸水率3、水中加熱
Brick burst cooking box
1.Sintered brick 2.Hollow brick 3.Sintered clay tile 4.Hollow block
Performance
1.Lime burst test 2.Water absorption rate 3.Heating in water
磚瓦爆裂蒸煮箱使用方法(使用時請詳細閱讀說明書)
★在箱內放足所需試驗的清水(參考國標510)再放入試件蓋上蓋子。
★在水封箱內放清水,放氣口可安一短管。
★接通電源進行加熱。
★當達到溫度后,調節定時器使試驗時間自動停止工作。
How to use the brick bursting cooking box(please read the instructions carefully when using)
★Put the required test water in the box(refer to GB 510)and put the test piece on the cover.
★Put water in the water seal box,and the air outlet can be short.
★Turn on the power to heat.
★When the temperature is reached,the adjustment timer will automatically stop the test time.
磚瓦爆裂蒸煮箱調整方法:
★在正式使用前,首先檢查電源情況、絕緣電阻及接地線。
★先空箱放入清水將溫度計調到100℃。
★在調好以后,就可進行工作,在箱內溫度恒溫后,綠燈自動停止(表示停止加溫);紅燈亮,如果需要自動斷電可將計時器進行調節,方法如下:按計時器,如設定30分鐘,即設置成“0030”然后打開開關設定如溫度即可計時。
★本蒸煮箱是常壓容器,不能做受壓試驗,因此有些蒸汽泄出。
Brick tile burst cooking box adjustment method
★Before the official use,first check the power supply,insulation resistance and grounding wire.
★Put the thermometer in the empty box and set the thermometer to 100°C.
★After adjusting,you can work.After the temperature in the box is constant,the green light stops automatically(indicating stop heating);the red light is on,if you need automatic power off,you can adjust the timer as follows:press timer If it is set for 30 minutes,it is set to"0030"and then the switch setting such as temperature can be turned on.
★This cooking box is an atmospheric pressure container and cannot be subjected to a pressure test,so some steam is released.
磚瓦爆裂蒸煮箱維護與保養:
★本產品電熱元件標在PH值等于的水中壽命大于1000小時,在有化學成分的水中壽命將相應減少,因此應在每次試驗后,將水放凈、擦凈。
★使用前應檢查絕緣電阻和箱體接地情況。
★不允許不加水干燒。
★溫度計應隨時調節,保證可靠的自動控制。
★儀器接地要良好。
Brick tile explosion cooking box maintenance and maintenance
★The electric heating element of this product is marked with a life of more than 1000 hours in water with a PH value equal to 0.5 hours.The life of the chemical component in the water will be reduced accordingly.Therefore,the water should be cleaned and wiped clean after each test.
★Check the insulation resistance and the grounding of the cabinet before use.
★Do not allow to dry without water.
★The thermometer should be adjusted at any time to ensure reliable automatic control.
★The instrument should be grounded well.