騰達試驗儀器廠:
瀝青混凝土靜三軸試驗儀是檢測儀器,用于測定瀝青混凝土的三向受力狀態下的抗剪強度和變形參數。適用于室內成型的試件和現場鉆取的芯樣。包括壓力室、垂直壓力加壓裝置、側壓力恒壓裝置、體積變化測量裝置、恒溫室與微機控制單元系統。
Asphalt concrete static triaxial tester is a testing instrument used to determine the shear strength and deformation parameters of asphalt concrete under three-way stress.Suitable for indoor formed test pieces and core samples drilled on site.Including pressure chamber,vertical pressure pressurizing device,side pressure constant pressure device,volume change measurement device,constant temperature room and microcomputer control unit system.
瀝青混凝土靜三軸試驗儀符合電力部水工瀝青混凝土試驗規程DL/T5326-2006的要求,
Asphalt concrete static triaxial tester meets the requirements of the Ministry of Power's hydraulic asphalt concrete test regulations DL/T5326-2006,
瀝青混凝土靜三軸試驗儀技術參數:
★A大載荷100KN;
★主機電機功率:1000W
★恒溫水浴溫控范圍4℃-60℃外接電源:220V×50Hz;
★數采儀外接電源:220V×50Hz;
★主機升降速度范圍:0.1~50mm/min
★主機升降行程:0~300mm;
★壓力室極限承載壓力:2Mpa;
★輪輻傳感器:0~100KN
★精度:0.05%FS
★試件尺寸:Φ100X200mm
★外形尺寸:860X550X1600mm
Technical parameters of asphalt triaxial static tester:
★A large load of 100KN;
★Host motor power:1000W
★Temperature control range of constant temperature water bath 4℃-60℃External power supply:220V×50Hz;
★External power supply of data acquisition instrument:220V×50Hz;
★Raising speed range of main machine:0.1~50mm/min
★Host lifting stroke:0~300mm;
★Ultimate load pressure of pressure chamber:2Mpa;
★Spoke sensor:0~100KN
★Accuracy:0.05%FS
★Test piece size:Φ100X200mm
★Dimensions:860X550X1600mm