:IS220PVIBH1A 336A4940CSP16 振動監控包 用于大多數MK VIe分布式I/O組件
IS220PVIBH1A技術規范
環境溫度范圍 | -30至65攝氏度 |
電路板兼容性 | 振動端子板(TVBA) |
頻道 | 13用于接近和振動 |
共模電壓 | 量滴5伏直流電 |
規模 | 3.25英寸高x 1.65英寸寬x 4.78英寸深 |
幀速率 | 3.125、6.25、12.5、25、50和100赫茲 |
功能縮寫/縮寫 | PVIB |
LED指示燈 | 四 |
探測功率 | -24伏直流電,每個傳感器12毫安負載 |
狀態指示燈 | Attn,Pwr,Link,TxRx |
/u003Cp dir=/u0022ltr/u0022/u003EThere are thirteen channels on this pack which are used for collecting and reading proximity and vibration information through several sensor types which are as follows:/u0026nbsp;/u003C/p/u003E
/u003Cul/u003E
/u003Cli dir=/u0022ltr/u0022/u003E
/u003Cp dir=/u0022ltr/u0022/u003EVelomitor/u003C/p/u003E
/u003C/li/u003E
/u003Cli dir=/u0022ltr/u0022/u003E
/u003Cp dir=/u0022ltr/u0022/u003ESeismic/u003C/p/u003E
/u003C/li/u003E
/u003Cli dir=/u0022ltr/u0022/u003E
/u003Cp dir=/u0022ltr/u0022/u003EProximitors/u003C/p/u003E
/u003C/li/u003E
/u003Cli dir=/u0022ltr/u0022/u003E
/u003Cp dir=/u0022ltr/u0022/u003EAccelerometers/u003C/p/u003E
/u003C/li/u003E
/u003C/ul/u003E
/u003Cp dir=/u0022ltr/u0022/u003EThe sensor types are used with different channels, for example, the accelerometers are only used with channels one, two, and three./u003Cstrong/u003E Please note that channels nine, ten, eleven, and twelve can only be used in supporting proximitors while the thirteenth channel can input a proximity-type or Keyphasor signal type./u003C/strong/u003E Note that the thirteen differential inputs on the IS220PVIBH1A pack have a DAC (digital analog converter) which is used for bias adjustment which can void the DC content of the signal which will better center the A/D (analog-to-digital) input range./u0026nbsp;/u003C/p/u003E
/u003Cp dir=/u0022ltr/u0022/u003EThe PVIB I/O pack has a processor application code that is used to potentially contain all of the logic codes necessary to allow the pack to operate from singular or dual Ethernet inputs. The network paths necessary to properly operate the IS220PVIBH1A pack are active at all times when being operated from two Ethernet inputs. /u003Cstrong/u003EIf for any reason either network fails it will not result in any type of disturbance to the operation of the I/O pack but the failure will be indicated through the operating network connection./u0026nbsp;/u003C/strong/u003E/u003C/p/u003E"}">
產品說明
IS220PVIBH1A型號被設計為振動監控包。PVIB包的主要功能是在多達兩個I/O以太網網絡和一個振動端子板之間提供電氣接口功能。該組件的主要部件是主處理器板,用于大多數MK VIe分布式I/O組件,以及子板和采集板。
該組件上有13個通道,用于通過以下幾種傳感器類型收集和讀取接近度和振動信息:
-
Velomitor
-
地震的
-
前置器
-
加速計
傳感器類型用于不同的通道,例如,加速度計僅用于通道1、2和3。請注意,通道9、10、11和12只能用于支持接近器,而第13個通道可以輸入接近型或鍵相器信號類型。請注意,IS220PVIBH1A封裝上的13個差分輸入有一個DAC(數模轉換器),用于偏置調整,可以消除信號的DC成分,從而更好地集中A/D(模數)輸入范圍。
PVIB I/O包有一個處理器應用代碼,用于潛在地包含所有必要的邏輯代碼,以允許該包在單或雙以太網輸入下運行。當通過兩個以太網輸入操作時,正確操作IS220PVIBH1A組件所需的網絡路徑始終處于活動狀態。如果由于任何原因,任一網絡出現故障,不會對I/O包的運行造成任何類型的干擾,但故障將通過運行中的網絡連接來指示。