電源供應(yīng)器

the control units of the pscu series can be used to supply low voltage photoelectric
sensors, as well as inductive or capacitive proximity, with the possibility to process the
outputs with logic and timing functions.
the input can be configured for 1 or 2 sensors, with npn or pnp, with relay, or with 0-
10 vdc analog output, which can be controlled with different logic functions: not,
and, or, nand, nor.
the signal resulting from the logic operations drives the controller output, which can
be processed with timing functions: on and/or off delay, monostable or bistable
commutation.
on the pscu control panel, protected by a transparent cover, are present the leds
for power, inputs and output status indication, as well as the trimmer for the inputs
sensitivity and the timer adjustment.
the input se-lection, the logic and the timing functions are easily configured using the
dip-switches on the controller side, where the extractable terminal blocks for the
connection are also present.
the pscu series is suitable for din rail mounting and is available in different models,
100-240 vac or 12-48 vac/vdc power supply input and relay spdt or transistor pnp
no-nc controller output.
pscu series
power supply with logic and timing functions
a.02
aph